How To Setup Nintendo Entertainment System On A Modern TV | Retro Gaming Guy NES Setup Guide

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 118

  • @elmic91
    @elmic91 2 роки тому +38

    What is the reason behind switching white and yellow? I always thought white was another sound in/out for stereo, not video.

    • @Jacquesous
      @Jacquesous Рік тому +7

      I think he probably did that just in case someone only has the red and white audio connectors. The RCA cables came with all three and also with just red and white. The NES is not in stereo, which means he only needed one for audio. All three colors could be changed around as long as you hooked them up to the correct ports on the other side.

    • @brewcrewfan44
      @brewcrewfan44 6 місяців тому +2

      I'm wondering that as well.
      Also why does it have to be channel 4? Doesn't that matter only if using a coax where you'd then tune your tv to ch 3 or 4?

    • @galinstan5603
      @galinstan5603 6 місяців тому +1

      I agree, it should not matter.

  • @kevinhanley6462
    @kevinhanley6462 2 роки тому +16

    I premiered this video. Well done for the restoration and setting it up! It took me back to the 80s and 90s. It was interesting comparing it with your emulation videos vs the real thing. The latter stretched it out wide, but looked smooth. An emulator would know to go 4:3.

    • @OfficialChaseBrogan
      @OfficialChaseBrogan  2 роки тому +5

      Yep! That's the Av to hdmi converter that stretches it out when converting over to hdmi.

    • @kevinhanley6462
      @kevinhanley6462 2 роки тому +1

      @@OfficialChaseBrogan It stretches out well. The user can override it on the TV. I was also impressed you didn't get a snowy picture, unlike the Amiga with an RF modulator. Tuning the TV with Channel 36 works better on smaller CRTs: a lot of the signal is lost, but was common back in the day. The SCART adapter resolves this.

  • @GumGuy12199
    @GumGuy12199 Рік тому +5

    Thanks! Helped a lot. Great mic quality.

  • @susanfit47
    @susanfit47 Рік тому +4

    I hook my NES about 21 years ago back in mid 2002 at my now-late grandmother's house. I'm planning to get another one soon for my house.

  • @cJg242
    @cJg242 Рік тому +7

    I'm Stuck!! Just got a black screen on my vizio tv that is a few years old. It has the colored (not yellow) ports on the side that I hooked up just like you did on your adapter. Was hoping it would work for my 3 y.o. grandson :( Any suggestions???

    • @lewanuva8158
      @lewanuva8158 6 місяців тому

      I believe the green port works as a yellow port on TV's that support both types of colored inputs. I don't know if that still works now days but it's worth a try

    • @danzig3764
      @danzig3764 2 місяці тому

      It’s probably your pin connectors that aren’t reading the game

  • @jaymenadue2035
    @jaymenadue2035 2 роки тому +7

    I'm not getting picture or audio. I am using the HDMI converter plugged into the TV. I have tried 720 and 1080. I am not getting the "Input" error on TV. I am not getting anything on HDMI 1 OR 2 when attempting either Input mode. NES is not blinking, cartridge(s) is down. How do I know converter is not the problem?

  • @ferryj6083
    @ferryj6083 Рік тому +3

    Delighted with your video. Helped us a lot 👍🏻✌🏻

  • @josephsylvester3362
    @josephsylvester3362 11 місяців тому +1

    Quick question I have video but no volume tried everything any thoughts ?

  • @makingmoney8405
    @makingmoney8405 6 місяців тому +1

    Thanks brother. The converter is what I needed to figure out

  • @alterawashington1456
    @alterawashington1456 Рік тому +2

    What channel tv should be on

  • @bobbaj1775
    @bobbaj1775 Рік тому +1

    connected with RCA cables in back but video not even close to clear jumpy , would the converter help

  • @kerryparker1635
    @kerryparker1635 2 місяці тому

    Hi! I really like your video. I tried your way, but my light is blinking red. My TV has an HDMI *and* AV red, yellow, white ports. I tried the AV set up, and followed your directions meticulously but no dice. Should I try the HDMI set up with a converter? Thank you for your help!

  • @I_am_kandyman
    @I_am_kandyman 8 місяців тому +1

    I have a nes snes and n64 hooked up through the same set up to a 4k HD TV. And the picture horrible. Super blurry. If I buy a HD TV with component inputs will it give me a clear picture? Not sure what the issue is

  • @jayman912
    @jayman912 4 місяці тому

    lol I about died when you fired it up and said "I'm just running through it here" while B button clearly not being held and Mario walking through the level. Sorry just found it funny I know what you mean but I try teach my kids how to play and am like "Hold the B Button or You Won't Make The Jump!"

  • @Lilsaucepacket
    @Lilsaucepacket 8 місяців тому +1

    Wait I got one and they gave me a yellow and red thing will it still work?

  • @allen-gt5ng
    @allen-gt5ng 2 роки тому +3

    Do I need to wear the gloves also when hooking it up so I dont get dirty

    • @OfficialChaseBrogan
      @OfficialChaseBrogan  2 роки тому

      Haha depends on your console and how dirty it is. I had just cleaned up the console so I still had them on from that.

    • @RickyFrench72
      @RickyFrench72 Рік тому

      🤣🤣🤣

  • @Elin-Esteem84
    @Elin-Esteem84 7 місяців тому +2

    What source do i need to put my tv on?? Nobody talks about that, my tv just has a blue screen that says no signal. What do i do w my tv

    • @jessieslootstash
      @jessieslootstash 7 місяців тому

      Whatever Port the HDMI is connected to would be the source you use. Usually called HDMI 1 or HDMI 2 on your tv

  • @rolandbaron5813
    @rolandbaron5813 2 роки тому +2

    My TV has the 3 component section. My case I just plug them in? Thanks.

    • @OfficialChaseBrogan
      @OfficialChaseBrogan  2 роки тому +1

      Red white yellow components? Just attach as show in the video. You have the twitch them out a little as shown or it won't show up on the tv correctly.

    • @mikeolortegui260
      @mikeolortegui260 Рік тому

      @@OfficialChaseBrogan thanks bud im going to see what my TV has today I also added that to my cart just in case I need it I also had a supper nito

  • @th34028
    @th34028 7 місяців тому

    Great tutorial! I followed everything from your video but I don’t have sound. How can I fix to have sound while playing?

  • @fernandoch1110
    @fernandoch1110 3 місяці тому

    my friend, great video. I tried the same but for some reason I see multiple lines on the screen and it "shows image, disappears, shows again, disappears". Do you have any clue?

  • @boooooooga
    @boooooooga Рік тому +1

    I loved the 1-1 gameplay.

  • @marcusharper8980
    @marcusharper8980 2 роки тому +10

    You didn't blow the cartridge and console

    • @danzig3764
      @danzig3764 2 місяці тому

      He replaced or fixed his connector pins

  • @Elin-Esteem84
    @Elin-Esteem84 7 місяців тому +4

    Y do u have gloves on?

  • @FrankSausage
    @FrankSausage 11 місяців тому +21

    I hope you won your MMA fight before making this video!

  • @adancarlos7057
    @adancarlos7057 3 місяці тому +1

    Did the setup with the same adapter and everything and I’m 99% sure it shorted my nes. Someone please let me know if there’s anything I can do to fix it

  • @blissnaturals
    @blissnaturals 7 місяців тому

    How do I do this same Picture in Picture if I want to stream myself playing?

  • @FaroukSentinel
    @FaroukSentinel 10 місяців тому

    Can u connect that console to laptop? Pls let me know

  • @Thais9Barbosa
    @Thais9Barbosa Рік тому +2

    I was gifted one of this but the previous owner gave me the wrong power cord. After watching your video I’m now afraid to buy one on ebay and brake it. Do you have a suggestion on where can I find a trustable cable?

  • @conniepegues2470
    @conniepegues2470 8 місяців тому

    Thanks, this is sooooo helpful in getting me started. I have sound but no video. An occasional squiggly picture is all I can see.

    • @nationaldeath4029
      @nationaldeath4029 8 місяців тому

      After checking that proper system setup. Clean the cart and the cartridge port. While system is on and the game is in down positions gently move/wiggle cart until solid screen achieved. Reset and repeat until game picture is clear. Next check the board. If all things look like it should, move to the lock out chip and disable the third pin on right side. There are videos on UA-cam that gives instructions.
      If that doesn't work, you will need to replace the port pins on the motherboard. These are getting harder to find but these are out there.

  • @GreyWilli..
    @GreyWilli.. 6 місяців тому

    Great tutorial, helped bunches!

  • @ejoshcoron
    @ejoshcoron 10 місяців тому

    Do you experience any lag going through the converter?

  • @jaytdb
    @jaytdb Рік тому +3

    thank you
    helps a lot!

  • @rachelr9126
    @rachelr9126 Рік тому

    It doenst work for me😢.
    It gives me blue snow effect. Could it be the wrong adapter?

  • @patricksmith1532
    @patricksmith1532 Рік тому

    I set up my NES on my HDMI, it played a little bit then when I inserted another game, it said "no signal"... How can I fix it?

  • @gunsentry8349
    @gunsentry8349 2 роки тому +1

    No link in description?

  • @unclesalty7778
    @unclesalty7778 2 роки тому +3

    Black Nitrile Exam gloves is a must!

  • @shanegreen268
    @shanegreen268 6 місяців тому

    Great video 👍 thanks..

  • @luciferlight5082
    @luciferlight5082 4 місяці тому

    I used to connect my nes to a car battery and it worked fine from 4 volts-12 volts the amps didn't matter. A very forgiving unit

  • @VatosLocos-ql8gb
    @VatosLocos-ql8gb 2 місяці тому

    What the name of this device?

  • @landonkujawa4626
    @landonkujawa4626 Рік тому

    My NES power light is blinking. What does that mean?

    • @kalhendonley6632
      @kalhendonley6632 8 місяців тому

      Mine to

    • @Moluccan56
      @Moluccan56 Місяць тому

      Jiggle the game cartridge back and forth a little bit. There is a UA-cam that gives you some solutions, as well.

  • @dauvinimated
    @dauvinimated Рік тому +1

    Excellent tutorial! Thank you.

  • @joepena4547
    @joepena4547 Рік тому

    Question, got mine working, but it’s in black and white. Is something off?

    • @TheFallOfMalevelonCreek
      @TheFallOfMalevelonCreek 6 місяців тому

      If you have multiple input options on the TV remote try something else. I had the same issue on my VHS and I switched from aux input to component and it worked. (Or component to aux. Can't remember).

  • @hellosquirrel79
    @hellosquirrel79 Рік тому

    I’ve tried this with two different tvs and the screen is just pure white. Not the kind when the cartridge isn’t working all that great but like I’m on the wrong thing. And both tvs say Av ntsc?

    • @DrystanKreed
      @DrystanKreed Рік тому

      Same thing is happening to me, did you ever solve the issue?

  • @bluetitan4735
    @bluetitan4735 Рік тому

    Question where did you get your NES?

    • @OfficialChaseBrogan
      @OfficialChaseBrogan  Рік тому

      Shop goodwill - the website . Love getting stuff there.

    • @truthoverfacts9254
      @truthoverfacts9254 Рік тому

      I'm a professional dumpster diver, and found one in the trash. Older Lady had passed, and her kids dumped her entire house. Very sad!

  • @milk.choccymilk
    @milk.choccymilk 2 роки тому +4

    This doesnt work for me i tried everything

  • @adambelfast1
    @adambelfast1 Рік тому

    I have have set my nes up just like that way you have. The HDMI adaptor is even the exact same. But the resolution is no where near as clear as yours. Its not awful but its not as good as yours, theres a significant difference. Its very pixilated and theedges of text and objects in the game are quite rough and bumpy. Not as smooth as yours. Any advice on how to make the visuals smoother?

    • @OfficialChaseBrogan
      @OfficialChaseBrogan  Рік тому +1

      These adapters have changed for the worse. I'd bet yours is newer than mine because many have complained about them. Mine is about 3 years old. I just got another one same exact one and like you said it's significantly different now. On my ps2 it was so bad I wouldn't even play with it connected. I assume they are using inferior parts now.

    • @adambelfast1
      @adambelfast1 Рік тому

      @@OfficialChaseBrogan Yeah its pretty new I got it 2 months ago. Any recommendations for another hdmi adapter?

    • @ChiRickyboy
      @ChiRickyboy Рік тому

      @@OfficialChaseBroganI have the exact same problem. It’s still playable. Thanks again for the video!

    • @TheHardCoreCafe
      @TheHardCoreCafe Рік тому +1

      @@adambelfast1retrotink ?

    • @adambelfast1
      @adambelfast1 Рік тому

      @@TheHardCoreCafe I'll have a look. Thanks

  • @tiffanyadigwe1053
    @tiffanyadigwe1053 Місяць тому

    This didn’t work for me and bought that same connector from Amazon

  • @guesudita
    @guesudita 11 місяців тому

    Why does the duck game don’t work on new tvs ?

    • @Moluccan56
      @Moluccan56 Місяць тому

      Maybe to do with the resolution.

  • @pirzthiaplayz5902
    @pirzthiaplayz5902 2 роки тому +1

    I just have a white screen... no picture?

  • @jeffyonkman4048
    @jeffyonkman4048 Рік тому

    Don't you need coax cable?

    • @Jacquesous
      @Jacquesous Рік тому

      Back in the day, it was more common to connect it with a coax cable, but that would have been connected to a separate small converter called an RF switch. Then the RF switch would be plugged into the rca port next to the channel switch. Then you would change to the channel to 3 or 4, whichever came in the clearest. Usually channel 3 since there were no tv stations that broadcasted on it. He didn’t need to change the switch in the video since he was using an HDMI converter.

  • @SteeleDude5000
    @SteeleDude5000 9 місяців тому

    Thank u bro

  • @alejandrobecerra9730
    @alejandrobecerra9730 Рік тому

    I really need to get those

  • @ELCorko
    @ELCorko 8 місяців тому

    1:00 You don't need put the cartidge down.

  • @TheNDJustice
    @TheNDJustice 7 місяців тому

    A lot of generic power supplies, btw, might say same Volts (9V) but are WRONG amps. This will matter. Generic usually show .835amps but the OEM power supply is 1.3 amps. FYI

  • @Czj123
    @Czj123 Рік тому

    What happens if it doesn’t turn on

    • @OfficialChaseBrogan
      @OfficialChaseBrogan  Рік тому

      Then it doesn't work haha it probably has a bad power cable or the power port could be bad on the console. Could be a bunch of things wrong causing it.

  • @calebpat
    @calebpat 7 місяців тому

    I tried this and it just gives me a solid pink screen.

    • @samwich_39
      @samwich_39 2 місяці тому

      same except it was green

  • @100Bucks
    @100Bucks Рік тому

    So there's no channel 3 requirement to play😅 Just hdmi input. All game systems ran on channel 3 back in the day.

  • @kbramlett6877
    @kbramlett6877 Рік тому +2

    A couple of addendums to your video. When it comes to RCA cables, they are, what I call, color-coded for dummies. Sorry to put it this way, but let me explain,. It doesn't matter which colored wire you use as long as both ends are connected to the same RCA port. For example, you could use the red wire for the video as long as both ends are connected to the video ports. But omitting the use of the yellow wire made absolutely zero sense to me when yellow has always been the designated color port for video. If you show me an electronic device that uses an RCA connection that DOES NOT use yellow for the input or output for the video connection, then I will show you a 3-dollar bill. Next, when connecting your NES via RCA, it does not matter which channel on the back is selected as that is only used when connecting the NES via RF. When using the converter, you need to choose the video output prior to turning on your connected console. For the NES, SNES, and Genesis, use 780p for the best resolution. One last thing, When he was talking about only using the original NES AC adaptor, he was correct. I have personally seen one that claims to be 3-in-1 that is supposed to be compatible with the NES, SNES, and Genesis. Avoid that particular one. You can usually find original AC adaptors in most retro gaming stores.

  • @tgizhectic
    @tgizhectic 4 місяці тому

    Skip video read this. 1.Plug your power in wall. 2. Plug av in av on back of tv. Enjoy.

  • @orbiquity
    @orbiquity 2 роки тому

    Why CH 4?

  • @04mach1monster
    @04mach1monster Рік тому

    My power light blinks on and off

  • @CHUNKOS
    @CHUNKOS 3 місяці тому

    Bro the tv already has av ports

  • @LouisTheTraveler76
    @LouisTheTraveler76 8 місяців тому

    Genius, thank you. Damn white into yellow got me - makes no intuitive sense!

  • @savvystealsanddeals
    @savvystealsanddeals 5 місяців тому

    You did not mention what settings your tv need to be on…

  • @JehovahGod-Room102
    @JehovahGod-Room102 11 місяців тому

    Didn’t tell us nothings about how to program the TV

  • @derekp13
    @derekp13 Рік тому

    You never tell the tv settings?

  • @jessicaburke943
    @jessicaburke943 Рік тому

    This doesnt work, I’ve tried everything

  • @William50987
    @William50987 2 місяці тому

    Hello I seeeereeeeeeeeee you

  • @audioin9105
    @audioin9105 3 місяці тому

    nice tats

  • @jst.laurent4535
    @jst.laurent4535 8 місяців тому

    Why TF are you wearing gloves 🤣🤣🤣🤣

  • @the80and90srecyclebin
    @the80and90srecyclebin 2 місяці тому

    you must think people are stupid