Hyundai ix35 handbrake Adjustment how to adjust yourself easily park brake adjuster tucson 2015 on
Вставка
- Опубліковано 20 лис 2021
- Thank you for watching my video on how to adjust the hand park / brake on a hyundai ix35 or tucson 2015 on
Please like and subscribe, also please follow me on Instagram or Facebook to keep up to date with what's going on on my channel @ Martys_workshop . If you would like to contribute to help grow this channel please feel free to purchase your very own Marty's Workshop T-shirt at
www.martysworkshop.com/
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel.
Thank you. I was trying to get at it from inside the 'cubby' box... glad I found you before I took the whole centre console apart!!
Thanks, for this video, I've now just done this on my 2011 IX35. Didn't have much adjustment left on the nut but think it made a difference, I now get just 6 x clicks before the handbrake is fully on. Remember to release the handbrake first before doing this.
Nice one Marty. Thanks for sharing.
Thanks for sharing straight to the point 👍
Good job man! 👍👍👍
Cheers fa vid youth just done my 2018 ix35
Thanks
Just did mine - but I had some electronic thing below the plastic bar, so couldn't get at the adjuster nut; had to use a 10mm socket to take the bracket off (holding this leccy thing), and was able to adjust.
Ótimo obrigado.
Before adjusting anything, pull the handbrake on and look at that spreader bar that pulls on the handbrake cables. It should be at right angles to the central rod with that adjuster nut. If it's sitting at an angle, one brake cable is being pulled further than the other. That indicates a fault with the brake caliper on that side. The handbrake mechanism in the caliper itself has probably seized up due to corrosion. That needs to be fixed first.
It's the same setup for a Kia Soul 2016 but a 10mms socket. The hardest part was getting the cover off.
Wow! I just got charged £60 a month or so ago for this exact job being done but it's away again and needs fixed again. Gonny give it a try, I'm no mechanic by any means but this looks simple 🙈 wish me luck 🤣🤣
Thanks 😉 was afraid I had too screw the entire thing off. Now I don't have too.
Hope this isn’t a stupid question, but do you have to make the adjustment with the handbrake off i.e. disengaged and fully down?
no need to remove central console panel.. just open the box... remove lower carpet... and there is a service hatch
is it the same for a 2018 tucson?
Sorry to say that's not how you adjust it.