Nice video and nicely done. A couple of additions - when dropping the anchor if you stop before you start to drop the anchor then you risk being blow out of position before you have the anchor down. Alternatively, pre drop some chain ie if you where in 10m of water then pre drop 8m. Just means you only have 2m to drop before it’s on the bottom and you can be reversing towards your berth like this so that you maintain steerage. The other suggestion, would be one you have your stern line on then you can ease these a motor away from the dock, you can then lift some chain with less load on the windlass and then motor back against the anchor getting it taught whilst tightening your stern lines. When solo I follow exactly the same process you presented with the above additions. The only difference is that when I reach the dock I leave the engine in reverse to hold the boat in place against the anchor, then I can safely step ashore with the line. When doing this I will stop a boat length out and pull back against the anchor to ensure I have good holding.
I often use this way of mooring, but I didn't know the trick of the windward line. Well done. On your youtube channel, I find many videos in Italian and a few in English. Can you tell me which video you realize in English? Thank you
We do an Italian and English version for all the video lessons, the sea trials and the sailing directions video. For these, we do a Spanish and Portuguese version too.
I’ve never done this, but I think you forgot to tighten the anchor chain after going forward and pulling on the stern line. Last thing you said about the chain was that it was loose.. if you leave it like that the bow will drift again as soon as you stop motoring.
You are right, Gabriel should have spent more time on this point, although he does talk about what to do if you are too slow to retrieve the chain. We apologise for it
Very good, helpful and clear video. Thanks. I just have one question: How do you spot the point to drop anchor? I mean how far from the final mooring position?
The general rule is to drop the anchor as far as possible. The further away it is, the tighter the grip on the bottom. It is more difficult to know where to throw it because of the position of the bow. It would be best to try to drop the anchor a little to windward so that your bow does not go over the other boats. It would be best if you thought about where the other anchors are. Otherwise, you risk dropping your anchor on the anchor of the boat to windward. Experience will tell you exactly where to drop the anchor. If you are a beginner, do not be afraid to make mistakes; everyone makes mistakes, and you learn by doing. The only thing that can happen is that you drop your anchor on someone else's. In any case, severe damage is unlikely. The most you will lose is some time trying to free the anchor.
Excellent video. Please advice: Recently I docked with anchor probably a little to close (sideways) to the anchor of my neighbour, and the crosswind was pushing as against his yacht. Nonetheless, docking went smoothly, hulls were paralell without touching themselves - but at undocking we eased windward stern line, and immediately became glued to the hull of our neighbour. Finally, we were able to "slide out", but what could be done to properly manage this situation? Best regards, L.
Solution 1) In this case, we hold the leeward line and give a bit of power. The boat will move all the way to windward. At this point we let go of the line and motor out of the berth. When we are outside, we raise the anchor. Solution 2) If you can lean on your neighbour's boat, another way out is to move the line from windward to downwind - the line is attached to the windward bollard, but to the leeward cleat. Start the engine at this point. The boat will move all the way to windward, away from the leeward boat. When this is done, give a bit of power and get out. Once outside, pull up the anchor. This is the way we work and it usually works, but as you know, there is never just one way at sea.
Another excellent video. Grazie mille! I have two clarifying questions if you don't mind. 1. I watched the same video in Italian with Maurizio's commentary too. In that version, you guys tied the port side first. Does that mean that the wind shifted between the Italian video and this one? I'm guessing they were recorded on the same day. 2. When Simona revs the throttle forward to straighten the boat, does it matter which way the rudder should point? Also, how much slack should the line have for this?
1) Yes, we recorded on the same day, but you have to take into account that in the afternoon the wind comes from the opposite direction to the morning. 2) The wheel must face the quay. The line must not be too short, as this would prevent the boat from moving, but it must not allow the boat moving forward to bump into the boat moored in front of us.
The tension of the anchor chain depends on the mooring lines. The lines do not need to be very taut, the boat should be able to move back and forth a little.
Depend. If in the port there are waves, then you will use it. Otherwise, it is not necessary. In most of the ports, it is not necessary. In someone, it is, and it is very important to have it.
@@solovelanet Could you make this more clear, please? In the video you see how you tighten windward stern line but do you tighten also the anchor chain afterwards?
the med- mooring by using the anchor looks a little more difficult than the version with lazy-/ mooringline at the bow. In my experience the version with mooringline is more and more used in the med. And if the harbour or marina has mooringlines installed you should use them. The reason for this are in my opinion the many problems with tangled anchors and anchor-chains. But the medmooring with anchor has also its advantages: 1.)the anchor at the bow when dropped and the chain gives the bow some guidance when docking backwards, especially in crosswinds. 2.)you don't have the risk of having the lazy-line of the bow- mooringline in your rotating propeller Finally I would recommend as much anchor- chain as possible, especially in windy or even stormy conditions. .
@@solovelanet One idea if you are single-handed is to have the anchor windlass on a remote control, and of course if you have a bow thruster that would be put onto the same controller.
Excellent description. Thank you.
Nice video and nicely done. A couple of additions - when dropping the anchor if you stop before you start to drop the anchor then you risk being blow out of position before you have the anchor down. Alternatively, pre drop some chain ie if you where in 10m of water then pre drop 8m. Just means you only have 2m to drop before it’s on the bottom and you can be reversing towards your berth like this so that you maintain steerage. The other suggestion, would be one you have your stern line on then you can ease these a motor away from the dock, you can then lift some chain with less load on the windlass and then motor back against the anchor getting it taught whilst tightening your stern lines.
When solo I follow exactly the same process you presented with the above additions. The only difference is that when I reach the dock I leave the engine in reverse to hold the boat in place against the anchor, then I can safely step ashore with the line. When doing this I will stop a boat length out and pull back against the anchor to ensure I have good holding.
You are right in both things, thank you
Nice to see Claire Williams working again
Great job. I always learn something when I watch your video.
Siete simpatici :) (oltre che bravi)
I see all your videos, very interesting.
No bad, very professional
Thank you
Ciao Andry!😄
I do it differently, and it works very well.
We propose a way of doing things. Surely, there are other methods equally correct.
Often I go to the dock with the anchor. In Greece, there are many places where you have to moor in this way.
I often use this way of mooring, but I didn't know the trick of the windward line. Well done. On your youtube channel, I find many videos in Italian and a few in English. Can you tell me which video you realize in English? Thank you
We do an Italian and English version for all the video lessons, the sea trials and the sailing directions video. For these, we do a Spanish and Portuguese version too.
I’ve never done this, but I think you forgot to tighten the anchor chain after going forward and pulling on the stern line. Last thing you said about the chain was that it was loose.. if you leave it like that the bow will drift again as soon as you stop motoring.
You are right, Gabriel should have spent more time on this point, although he does talk about what to do if you are too slow to retrieve the chain. We apologise for it
Very good, helpful and clear video. Thanks. I just have one question: How do you spot the point to drop anchor? I mean how far from the final mooring position?
The general rule is to drop the anchor as far as possible. The further away it is, the tighter the grip on the bottom.
It is more difficult to know where to throw it because of the position of the bow. It would be best to try to drop the anchor a little to windward so that your bow does not go over the other boats. It would be best if you thought about where the other anchors are. Otherwise, you risk dropping your anchor on the anchor of the boat to windward.
Experience will tell you exactly where to drop the anchor. If you are a beginner, do not be afraid to make mistakes; everyone makes mistakes, and you learn by doing. The only thing that can happen is that you drop your anchor on someone else's. In any case, severe damage is unlikely. The most you will lose is some time trying to free the anchor.
Excellent video. Please advice: Recently I docked with anchor probably a little to close (sideways) to the anchor of my neighbour, and the crosswind was pushing as against his yacht. Nonetheless, docking went smoothly, hulls were paralell without touching themselves - but at undocking we eased windward stern line, and immediately became glued to the hull of our neighbour. Finally, we were able to "slide out", but what could be done to properly manage this situation? Best regards, L.
Solution 1) In this case, we hold the leeward line and give a bit of power. The boat will move all the way to windward. At this point we let go of the line and motor out of the berth. When we are outside, we raise the anchor.
Solution 2) If you can lean on your neighbour's boat, another way out is to move the line from windward to downwind - the line is attached to the windward bollard, but to the leeward cleat. Start the engine at this point. The boat will move all the way to windward, away from the leeward boat. When this is done, give a bit of power and get out. Once outside, pull up the anchor.
This is the way we work and it usually works, but as you know, there is never just one way at sea.
@@solovelanet Many thanks, it's valuable advice :)
Another excellent video. Grazie mille! I have two clarifying questions if you don't mind.
1. I watched the same video in Italian with Maurizio's commentary too. In that version, you guys tied the port side first. Does that mean that the wind shifted between the Italian video and this one? I'm guessing they were recorded on the same day.
2. When Simona revs the throttle forward to straighten the boat, does it matter which way the rudder should point? Also, how much slack should the line have for this?
1) Yes, we recorded on the same day, but you have to take into account that in the afternoon the wind comes from the opposite direction to the morning.
2) The wheel must face the quay. The line must not be too short, as this would prevent the boat from moving, but it must not allow the boat moving forward to bump into the boat moored in front of us.
How much tension do you give to the anchorchain? That it comes straight? So you can not go bachward as with muringline?
The tension of the anchor chain depends on the mooring lines. The lines do not need to be very taut, the boat should be able to move back and forth a little.
Why do you not do a video about a Med mooring in a marina where you do not drop the anchor? It will be exciting.
We already done it, this is the link - ua-cam.com/video/m7fwqJ8XErM/v-deo.html
In crosswinds, do you drop the anchor stern to wind or bow to wind?
With the bow in the wind, manoeuvres, at least we, always do them.
do you use the snubber after anchoring stern to?
Depend. If in the port there are waves, then you will use it. Otherwise, it is not necessary. In most of the ports, it is not necessary. In someone, it is, and it is very important to have it.
When did you make the chain tight on the anchor and how was that done? Guessing you used the windless once the stern was tied off…
Yes we use the windless.
@@solovelanet Could you make this more clear, please? In the video you see how you tighten windward stern line but do you tighten also the anchor chain afterwards?
the med- mooring by using the anchor looks a little more difficult than the version with lazy-/ mooringline at the bow. In my experience the version with mooringline is more and more used in the med. And if the harbour or marina has mooringlines installed you should use them. The reason for this are in my opinion the many problems with tangled anchors and anchor-chains. But the medmooring with anchor has also its advantages:
1.)the anchor at the bow when dropped and the chain gives the bow some guidance when docking backwards, especially in crosswinds.
2.)you don't have the risk of having the lazy-line of the bow- mooringline in your rotating propeller
Finally I would recommend as much anchor- chain as possible, especially in windy or even stormy conditions.
.
We think your position is shareable, thank you for your comment.
How do you know when the anchor has touched the sea bottom?
Before starting to drop the anchor, check the depth. If the depth is 5 meters let go 8-9 meters chain then you can start to move back
what about if you are short handed?
Alone is a whole other thing, but it can be done, you change the techniques, but it is something that a lot of people do.
they are short handed @thewanderingbox8253 @@solovelanet
@@solovelanet One idea if you are single-handed is to have the anchor windlass on a remote control, and of course if you have a bow thruster that would be put onto the same controller.
Let's do it without a big motor
a bit fast and important commands and communication is missing
Let's do these things to the french. No one knows about sailing more than we do.
This does not look easy at all.
I messed up first time needing to do it in the med. But after many crowd shouting and helping, and some practice, you'll get it ;)