How to install a Storm Door Closer

How to install a door closer, for a screen door or glass storm door.
Thanks for watching!!!
YOU CAN ALSO FIND ME ON THE FOLLOWING:
PINTEREST: / davidhoard56
INSTRUCTABLES : www.instructables.com/member/...
INSTAGRAM: / davethewoodworker
LUMBERJOCKS: lumberjocks.com/Davethewoodwor...
Also remember when using power tools, always use proper Safety equipment, like Safety glasses and hearing protection.

[@Gristow3]

I asked a contractor how much would it cost to install a closer on my elderly mother's storm door (coincidence); he said for labor alone was $200! That is ridiculous, so I decided to do it myself. Thanks to you I installed the closer and saved my mother $200+ dollars.

[@BrianSapp945]

This is by far the best freakin video that was very thorough in explaining how to install a storm door.

[@davethewoodworker1043]

Thanks

[@tillyfreeman5192]

Thank you I’m worried of drilling a big gaping hole on the metal screen door so thank you for the specifics of the drill bits! I’m a female, lab worker but doing this first time so need every bit of detail and care to do this right first time

[@davethewoodworker1043]

You're welcome

[@Oilfieldtrash432]

Thanks for this video

[@davethewoodworker1043]

You're welcome

[@samston]

hi i watch your video how to put on the part that let the door close and not swing open , and I got it fixed and not swinging open all the times, especially when its windy, so thanks for the video. The video was very explanatory and easy to understand.

[@davethewoodworker1043]

You're welcome

[@Dakobah20]

thumbs up for helping me replace my broken door closer, you gave me the confidence to do it!

[@davethewoodworker1043]

You're welcome my friend

[@leighh1056]

Thank you-such a helpful video❤️

[@davethewoodworker1043]

Thanks and you're welcome

[@sssubram]

Great Video....one of the best out there explaining this install!!

[@davethewoodworker1043]

Thanks and you're welcome

[@davestrains6816]

Nice video, thanks for sharing. Dave

[@davethewoodworker1043]

Thanks

[@nicolerichardson4560]

Helpful video. Thanks for sharing

[@davethewoodworker1043]

You're welcome

[@singwithmyhands]

Dave
Thanks for a great explanation on how to install. But my question to you is in my case the door jamb is narrow. It's only as wide as the closer bracket and I know that the wood will tear out with the size of those screws and the tension put on by the door. I'm dealing with a full view door too. Suggestions please!

[@laquangbinh]

Thank you. It is helpful!

[@davethewoodworker1043]

You're welcome

[@ap4709pk]

Thank you

[@davethewoodworker1043]

You're welcome

[@wvcountryboy9148]

Great video. Thanks

[@davethewoodworker1043]

You're welcome

[@monkabuda]

Thank you sir! This is my project for tonight!!!

[@davethewoodworker1043]

Good luck, it's not that hard

[@monkabuda]

@@davethewoodworker1043 Got it done in no time last night!!! Thank you again!

[@davethewoodworker1043]

@@monkabuda you're welcome

[@ronruth1089]

Perfect got one from Home Depot no instructions what so ever. This guys shows you what the words on tall bracket means and where it goes. Also glass door verse metal door which hole to use solid 10 thanks

[@davethewoodworker1043]

Thanks and you're welcome

[@shutuplige6524]

very simple instructions. top shelf video Dave. My question is i have a full glass storm door that currently has a wind chain installed but no closer. i want a closer but the door frame at the bottom is not wide enough to mount the closer. can the closer AND the wind chain be mounted at the top without interfering with each other?

[@davethewoodworker1043]

Thanks, I don't know about the issue you have, I've personally not experienced that. Maybe you could remove the wind chain and just use the closer

[@leonciosimoes5406]

Good video my friend

[@davethewoodworker1043]

Thanks

[@rubypickles1836]

Okay tapping the nail in to mark the right place to drill is brilliant! Thanks for this walk thru, I'm going to be putting mine in tomorrow,

[@davethewoodworker1043]

You're welcome

[@M3GAN3116]

Thanks 👍

[@davethewoodworker1043]

You're welcome

[@letsthinkforamoment8904]

Great tip to punch a whole before drilling, thanks!

[@davethewoodworker1043]

You're welcome

[@tracywodonga8112]

thanks dave, trying to get some jobs done around the house, this was really helpful - from Australia

[@davethewoodworker1043]

Thanks, glad it helped

[@jijoe4257]

Wow what a well done video, thanks so much 😁 Question…when you install the actual door bracket, is it done with a closed door or open door? When you installed it it didn’t seem to have any pressure on it, but then the video jumped to opening the closer with the stop to put the pin in the glass door hole. Thanks again, much appreciated.

[@davethewoodworker1043]

Door closed

[@jijoe4257]

@@davethewoodworker1043 Perfect thank you 😊

[@davethewoodworker1043]

@@jijoe4257 you're welcome

[@USCG.Brennan]

@@davethewoodworker1043 Wish you had said that in the video!!

[@IEraiderfan]

Dave, a good video thanks for sharing.👍👍👍

[@davethewoodworker1043]

Thanks

[@kevinrussom7861]

My mom is at work right now

[@benjaminfarthing3849]

Why is it different for glass and screen doors? The weight of the door?

[@davethewoodworker1043]

Yeah

[@titanniki412]

Don't you have to adjust tension of door slamming

[@davethewoodworker1043]

Well there is a way to adjust the speed to close. But they come from the factory about right, no adjustment needed

[@kevinrussom7861]

I'm at my moms house 🏠

[@coolbro6969]

the instrustion onthebox where 1000000x more complicated convputyed and horrbile comapred tothis.

[@666Troll999]

Do need a cigarette?