Change your worn bearings like a pro !!!! on a KTM 350 EXC F
Вставка
- Опубліковано 16 жов 2024
- Hey up UA-camrs, Change your worn bearings like a pro , this week we change the worn bearings of the rear wheel on the KTM
Check out our sponsors - www.epicmotorc...
Head torch - www.amazon.co....
Support this channel buy me a coffee ☕ thanks
ko-fi.com/simo...
ALWAYS FOLLOW THE GREEN LANE CODE !!
Subscribe for free please follow the link - www.youtube.co....
Easiest free ways to support my channel
1. Subscribe 😎
2. Like or Dislike 👍👎
3. Comment ✍
4. Hit the notification bell 🔔
5. Share my vids with your mates
Stay Safe, RIDE SAFE
Follow me -
Facebook - simonbvlogger
Instagram - 51monb
Business opportunity's - simonbvlogger@gmail.co.uk
Equipment -
Insta 360 one X2
Gopro hero 7 black
Akaso V50
Rode video micro, microphone
Synco Wireless Mic
Fimora 9
My current motorcycles are -
BMW GS1200 LC
Yamaha RD350 LC
Suzuki TS125ER
Honda C50
Suzuki Gp125
Scorpa 250 twenty
Suzuki TS125X
Ducati Hypermotard 1100 S
KTM 350 EXC-F
Husqvarna Vitpilen 701
#bikelife #bmwr1250gsadvexclusive #spiritofgs #r1250gs #bmwr1250gs #motorrad #bmwr1250gsa #bmwr1250gsadventure #bmwr1250gsahp #bmw #bmwr1250gsadvnturehp #bmwbikes #ktm #yamaha #bmwgs #makelifearide #triumph #bmwr1250gsadv #bmwadventureriders #motorcycle #bmwr1250gsaexclusive #gs1200 #bmwgsfans #bmwr1250gsadventurehp #bmwr1250gsadventure #bmwmotorrad #freedom #northamptonshire #a14 #motorbiketour #motorcycle
#greenlane #greenlaning #DJI #mavicair #slate #simonb #Husqvarna
Nice one for this bud. I warmed a bit with a torch and they came out in two taps. I would never have known about the circlip.
Hey up Rosco, yes watched a video yesterday of doc wob taking his bearings out, he warmed up his also, will be doing that next time 🤔, thanks for watching and dropping a comment much appreciated, ride safe Simon B 😎
Hi Simon - just what l do as well ..... pop one of the covers off the bearing and get some more grease in there. Then pop cover back on, put the opened face into the hub.
This was common practice on bikes when l was younger.
Check out a company called 'simply bearings' you can read part no. off of side cover.
Also, if you have a local bearing shop and do similar - cheaper than 'bike' ones.
Good to grease up swing arm and steering stem too!
Hey up A Gee, I usually do that with the bearings, does it really help, who knows 🤔, the swinging arm bearings were done not too long ago, but didn't film it 😲, clutch rubbers next when the parcel arrives 🤭, ride safe, Simon B 👍
Great video Simon and a happy new year stay safe 🇬🇧👍
Hey up Richard, happy new year to you, thanks for watching, ride safe, Simon B 👍
Which Heat Torch did you use? 100% next time Cover off bearings and pack with a good Waterproof grease, the bearing will last and last 🙂, great honest video.
Hey up mrdangermouse, as I'm a plumber I used my own blow torch it's a rothenburg super fire 2, yes filling the bearings, does it really make them last longer ? If so how much, it's a good taking point, love to know your experience 😁, thanks for watching and dropping a comment 👍
@@SIMONB1 Pop the seal off, clean the grease out and just fill it with Marine grease (I use Morris K99), I do this every year and can't remember the last time I change a bearing.
Thanks for sharing the tip, I'll try it soon 😁, ride safe, Simon B 👍
Happy new year to you Simon hope you are well. I’m still out there riding work n play lol 😊. A very informative and important blog again. Ride safe and be safe mate 👍👍
Hey up Steve, good in you, some have put their bikes into hibernation 😲, thanks for watching and dropping a comment, ride safe, Simon B 👍
Also, happy new year 👍
Was that washer a hard black plastic piece? If yes it’s a spacer that’s supposed to be installed on the drive (sprocket) side.
Do you not use any cleaning agent , why not
Hey up Cliff, I used brake cleaner to remove grease and dirt from the area where the bearings were seated, is this what you mean ?
Hi Simon. I can’t get the spacers out of front wheel, never mind the bearings. Is there a special tool to get them out?
Is that worth putting in 2 new spacers.
👍
Hey up J-Mc72, they sometimes get stuck in, use a long screwdriver and knock them out from each side, put a bit of grease in them when you put them back in after you've cleaned them 😁, hope you get it sorted, ride safe Simon B 😎
@@SIMONB1 thank you Simon. Absolute star. It worked. 👍Unfortunately brake/pads disks didn’t arrive in time so no green lanes for me 😞 all that rushing around to try and spend Saturday on the bike and it’s still up on jacks.
Hahaha
Is it that funny 🤔 , I don't get what your getting at 🤔
I couldn’t see, did your spacer tube sit proud of the other side (so the wheel bearing sits on top of the tube, not being able to sit the bearing onto the shoulder of the hub.
I’ve sent home the circle side to its shoulder of the hub but the tube sits proud of the hub the other side?!?!