Thanks for the lesson. I just bought a used SCAG knowing that it has a bad drive motor. This is an excellent video to show me what's in store. Hopefully nothing is out of spec so I don't have to buy a new one. I'll be sure to disassemble it before ordering a seal kit. I'm new to hydraulics, but thanks to videos like yours, I have the confidence to move ahead with any repairs in this kind of thing.
Great video! I have a scissor lift model JLG 2658e, the traction motor has a fault which is very similar to this one. It's hard to find parts here in Brazil. Do you know if the TF, TG and DG engine line uses the same repairs?
How did you get the old high pressure seal and bearings out of the housing mine seems to be at stuck in in middle of the housing and the large bearing that doesnt get replaced thank you
Hey your video from yesterday, maybe two days ago, it was some metrology equipment from a family member. There was an unusual tool that you didn't know what it was and asked for comments. I knew what it was, but I could not bring it to mind, tip of my tongue sort of thing. I woke up with the answer in my head this morning. It has nothing to do with machinery, it's for cleaning smoking pipes. The Wood pipes for smoking tobacco get a buildup of tar and slightly burnt wood. I guess you want to pair this back occasionally so you are smoking less wood? I only know what it was because I had one for years without knowing what it was and Mr Pete featured one on his what is it series. I was so happy to figure out what it was but pretty grossed out to understand what I had cleaned out thinking it was a precision tool. Some of them are rather nicely made, but they're not really worth anything. They just become an endless loop of unrequested Father Days gifts. Have a good one
Great video 👍 what bearing is it that does not come with the seal kit? I have the same motor in bits but the seal kit only came with the smaller 308 bearing and I need the other bearing. Thanks
The motors on most these are very similar in design, make sure to mark your plates for orientation and be mindful of the order the seals and bearing are on the output shaft and there isn’t to much else to it
SEAL KIT NUMBERS// I have an old dingo skid steer that I can't find the specs of the hydraulic motor. But it looks exactly the same as this one. Is there any chance of getting the numbers or seal kit number s for that one
Now my question is if my motor is lacking power and it sounds like grinding going forward but doesn't sound bad in reverse I put in in reverse and the machine sounds good can you diagnose the problem ?
@@sunillatchman7980 do you see a spot where one would go, some have two and there are some that doesn’t have any, but if they do there always against that back plate
@@sunillatchman7980 then that’s probably the issue, for most brand of motors you can order them, they don’t come in the kits. I usually try to find what size they were and order them online as there super cheap that way
Good lord!!!!! How old is that motor???? Judging from what I can barely make out from the serial number, that thing has some serious years on it!!! (and not that it matters for performance, but I never would have let that motor out the door with the endcover installed in that orientation lol) But good deal. It's cool seeing someone else do what I used to do at Whites.
Should of installed the seal before you put in back together I build wheel mount motors almost every day at work every brand motor has different seals and parts
@@smalltownmachineshop6860 where do you order your rebuild kits? I have a wheel motor that just started leaking and its pretty bad. It’s coming out the end on the wheel hub side. It’s a parker on an exmark stand on mower.
Thanks for the lesson. I just bought a used SCAG knowing that it has a bad drive motor. This is an excellent video to show me what's in store. Hopefully nothing is out of spec so I don't have to buy a new one. I'll be sure to disassemble it before ordering a seal kit. I'm new to hydraulics, but thanks to videos like yours, I have the confidence to move ahead with any repairs in this kind of thing.
Just make sure to mark everything and take as many pictures as you need
Excellent content! Make more of these technical videos. Thanks they help for sure and take some of the fear out of this.
I’m going to, repair season is starting and I want to show more of what I do, thanks for watching
Liked how you covered a lot of the details to the process. Fun video.
Thank you very much
Its a great video with real explanations. Hey guys can someone let me know how can i buy any spare parts of this gearbox in Australia? Thanks
Great video! I have a scissor lift model JLG 2658e, the traction motor has a fault which is very similar to this one. It's hard to find parts here in Brazil. Do you know if the TF, TG and DG engine line uses the same repairs?
Always make.sure you mark the outside of the motor with a paint marker or a die grinder to help with reassembly
Yup, I thought I showed that but I guess I didn’t, it’s always a smart move
He did mark it, it was in the disassembly video
Excelente!! Very good work.. ✌💯👋👋👋👋👋
How did you get the old high pressure seal and bearings out of the housing mine seems to be at stuck in in middle of the housing and the large bearing that doesnt get replaced thank you
Hey your video from yesterday, maybe two days ago, it was some metrology equipment from a family member. There was an unusual tool that you didn't know what it was and asked for comments. I knew what it was, but I could not bring it to mind, tip of my tongue sort of thing. I woke up with the answer in my head this morning. It has nothing to do with machinery, it's for cleaning smoking pipes. The Wood pipes for smoking tobacco get a buildup of tar and slightly burnt wood. I guess you want to pair this back occasionally so you are smoking less wood? I only know what it was because I had one for years without knowing what it was and Mr Pete featured one on his what is it series. I was so happy to figure out what it was but pretty grossed out to understand what I had cleaned out thinking it was a precision tool. Some of them are rather nicely made, but they're not really worth anything. They just become an endless loop of unrequested Father Days gifts. Have a good one
It had a drill bit as the small twist out part so heat that could be for cleaning out the stem as well
Nice work thanks
Thank you for watching
Nice 👍
great video
I know, that was with my last camera and the mic was starting to go unfortunately
good video
Thank you very much
Great video 👍 what bearing is it that does not come with the seal kit? I have the same motor in bits but the seal kit only came with the smaller 308 bearing and I need the other bearing.
Thanks
It doesn’t come with the back one, though it is a common bearing so not hard to find if you can still read the numbers off it
@@smalltownmachineshop6860 there is no numbers left on the outer race. I have measured it and no bearing matches those measurements
Hey Excellent work. Where did you get parts for the wheel motors. Thank you
I ordered them from partstree
Have a gravely 260z with a parker wheel motor leak, is it the same process to re seal or different? ps great videos
The motors on most these are very similar in design, make sure to mark your plates for orientation and be mindful of the order the seals and bearing are on the output shaft and there isn’t to much else to it
I need to rebuild my tca13099 motor from my JD z645, but can't find a rebuild kit. Any ideas?
Email me the part number at Badam485@yahoo.com and I’ll see what I can find for you
Untuk sealnya harus beli di mana bisa kasih tau no seelnya
Link for rebuild kit.
where do I find the seals mine is pouring on scags tiger cub
I order mine from parts tree
SEAL KIT NUMBERS// I have an old dingo skid steer that I can't find the specs of the hydraulic motor. But it looks exactly the same as this one. Is there any chance of getting the numbers or seal kit number s for that one
Mine is a 500444004 rebuild kit from Empire Hydraulics for a White 02004442 motor
Now my question is if my motor is lacking power and it sounds like grinding going forward but doesn't sound bad in reverse I put in in reverse and the machine sounds good can you diagnose the problem ?
That sounds more like a bad pump the the wheel motor itself, what kind of machine is it
@@smalltownmachineshop6860 bobcat 553 but I can buy the gerolr assembly
@@smalltownmachineshop6860 If you have ig or fb we can talk and I can show you maybe you could help me
@@CesarNunes18 email me at Badam485@yahoo.com
I removed one exactly like this from a tugboat for a leaking seal sent it to repair now after installing it back it works only without load
If one of the little check balls that fall out easily on the bottom isn’t in the plate they will do that sometimes
@@smalltownmachineshop6860 I just opened it and there isn't of those ball
@@sunillatchman7980 do you see a spot where one would go, some have two and there are some that doesn’t have any, but if they do there always against that back plate
@@smalltownmachineshop6860 there are 3 holes yes but none of the balls are there
@@sunillatchman7980 then that’s probably the issue, for most brand of motors you can order them, they don’t come in the kits. I usually try to find what size they were and order them online as there super cheap that way
Good lord!!!!! How old is that motor???? Judging from what I can barely make out from the serial number, that thing has some serious years on it!!! (and not that it matters for performance, but I never would have let that motor out the door with the endcover installed in that orientation lol) But good deal. It's cool seeing someone else do what I used to do at Whites.
I believe the mower it’s off of is a early 2000s
And yes I do need to be more mindful of details like that
Where did you buy your rebuild kit from?
Usually partstree if the motor came off a mower
@@smalltownmachineshop6860 do you have a number or link to what kit it was? Thanks in advance!
I want to need pressure oil seal no
👍👍👍.
Thanks for watching
I want to this motor seal purchase
Should of installed the seal before you put in back together I build wheel mount motors almost every day at work every brand motor has different seals and parts
Thanks for the tip, I do 20 or 30 a year but always welcome on advice on how to do it better
TH 545?
Where are you located?
South east Washington state
@@smalltownmachineshop6860 where do you order your rebuild kits? I have a wheel motor that just started leaking and its pretty bad. It’s coming out the end on the wheel hub side. It’s a parker on an exmark stand on mower.
@@jamesguiton3969 I order them through partstree
Number parts del pin