I'm 3 minutes into the video and already feeling anxious cause of all the parts! It was funny when you said "now I'm gonna remove all 12,500 and something bolts". You're very knowledgeable! Congrats!
@@speedkar99 my 12 Nissan Altima's 2.5 transmission starts to make a humming sound when I drive it for a couple of hours, I live in Imperial ca and the other day I had to go to San Diego thru the 8 fwy, the elevation starts at 1000 feet and ends around 4180 to its highest peak, I have to pull out to let the tranny cool at least for 10-15 minutes then away i go but this time i have to drive it looking at my RPM's do not exceed 2200 rpm's (65 mph) it really sucks! Any thoughts on why?
@@310_Latchkey_kid You literally just said why. You kick the shit out of it daily at low RPMs on long, hard ascents. Drop a gear and rev higher. You're welcome. P.S. As with Google Maps, lowest and highest points don't mean as much as "total ascent" (all the miles going up) and "total descent" (... and down).
HE TALKING ABOUT ALL THE BOLTS TO REMOVE TRANS from the car TO ? HE NOT A WIZ Kid ? BY FAR ?e if been around them 10 or more yrs ? i seen guys take them apart ? can't put them back ? OK ! MOST TRANS MIGHT HAVE THESE DAYS 2020 800 PARTS ! PLUS IF YOU WANT TO COUNT V BODY ? THAT'S A DIFF STORY ? WHO KNOWS ON THEM HOW MANY PARTS ! I BET HE DON'T EVEN KNOW ? I BEEN RE BUILDER 30 YRS TO every V BODY so DIFF ?
This is why I prefer manual transmissions. I’ve fully rebuilt two of my own but I would never dare to open up an automatic. You definitely have a lot of knowledge. Mad props sir.
Some manuals are complexe.. but in general it's quite simple. It also depends on what you call "rebuild" If you change the berings only that's the easier way to fix, sometimes there's more 😉
Automatics require a knowledge of upgrades to failure points or high wear areas that can be improved - plus knowing the proper spacing of part & testing of oil passages - replacing parts means a short life of 30 to 50K miles - remanufactured is 120 to 200k miles
Just wanted to come by and say thank you for the incredibly detailed, short, to-the-point, informative videos. After watching your upper control arm video I immediately subbed, but something like this is next level in terms of complexity. Awesome, amazing work you're putting into these generalized videos, thank you!
@@thealienrobotanthropologist excellent points! Abusing clutches is a guarantee for premature failure. Recently I got to experiment with the synthetic "Valvoline MaxLife ATF": its a far BETTER fluid than Honda DW1 mainly it has stable viscosity! It gives consistent shift points and managed pressure for lower clutch wear 😉. To be friend with your transmission: replace ATF early (20kMi without converter drain or 40k with converter) - Buying a "dipstick evacuator" will pay for itself the 1st time. 👍
@@thealienrobotanthropologist thanks for the explanation. I don't know much about automatics but he did say at 9:22 that the valve body is a big failure point 🤷
I hear alot of "don't do anything to the transmission or it will fail."99 Yukon 253,000 miles.Fluid is reddish brown translucent.I believe if I don't maintain it the filter could clog up and starvation will kill it.Many people don't think of the transmission until it slips try to save it then blame the flush or drain and fill.Not a transmission expert but heat and dirty fluid 🤞
Mad respect, I'm from Costa Rica, had to fix myself and learn from zero in order to fix my 2016 Mustangs 6r80. It was fun but took a long time. I lost reverse, 4th and 5th for abusing the Transbrake feature at the drag strip. I'm happy I studied the manuals and was able to change the clutches and now it drives again like a charm. Loved seeing this since it reminds me all that experience
@@ThreeDaysOfDan Why on earth would you want to learn to rebuild a Carburetor? Cars haven't had Carburetors really silce 1989 when Fuel injectors were introduced and direct injection engines were designed... Unless your working on like a classic collectible car idk why you would want to learn how to rebuild one
Thanks and that's what sets me apart.. I'd rather tear apart something real to learn myself and show you guys than draw, animate or just talk about it.
@@speedkar99 I'm doing research as I'm looking at eventually pulling and rebuilding the Aisin TF-80SC in my '07 XC90 V8. I've seen probably a hundred videos over the years pertaining to automatic transmissions, and this video helped convey more understanding about the inner workings than all the rest combined. So thank you. Cheers from a fellow Torontonian :)
the quality of your videos is fantastic, not a second of wasted time. Just directly to the point & explained so well for even the non-mechanically minded! much love from Australia!
Excellent tutorial, i especially like how you use the diagram to diagnose the issues. Automatic transmissions has always been such a mystery to until now - thank you!
Good and fast with much detail. I had flaring shifts in my 1996 Plymouth Voyager 2.4L with A-413 Torque-flite transmission, which is like the 1960's Chrysler 3-spd transmissions, but FWD version, which is much more pain to remove. I found several clutch plates worn down to bare metal. Interestingly, it had an extra steel plate in one clutch pack, suggesting the rebuilder (Certified Transmission label) had re-used worn clutch plates, filling the space with an extra steel. Chintzy approach since a clutch plate costs $2, but let them meet their 10K mile warranty. A rebuild kit only cost $100 and I bought the better dark "racing" clutch plates (graphite paper, HEM?). Your clutch plates will last much longer if you let up on the gas pedal when the transmission is ready to shift. I think that newer cars (since ~2010) do that automatically since the computer controls a motorized throttle and your gas pedal is just a "driver request". I disagree with "old Chryslers eating transmissions". I recently rebuilt the A-604 4 speed in our 2002 T&C 3.8L at 270K miles because I had a leak at the front which I though was from the front pump seal. It was pristine inside with the clutch plates worn 500K miles now. Chrysler transmissions in V-6 minivans which had problems were mostly due to shops refilling them with cheaper Dexron fluid (for GM), rather than the proper ATF+4, which causes shudder in the lock-up torque converter. Don't let monkeys touch them and they last.
I’m amazed that automatic transmissions can even work in the first place. The fact that people can drive a cad for 100k plus miles with a transmission doing all this work without the driver ever really even thinking about it.
Why? It’s actually more simple than a manual in many ways. No gears to mesh. No synchros or dog clutches. No shift linkages, no throwout bearings. Just clutches and bands that are activated in a certain sequence to hold sun, planet carriers, or ring gears still to make the gears you need. In the old days it was super simple. Three forward gears plus reverse just needed two planetary gears like a Simpson gear set. The valve body looks more complex than it is. And all of those smooth shifts also cushioned by a torque converter means a lot less shock loads than a manual.
I live listening to this guy talking about shit I don’t understand before going to sleep. Great voice, great cadence, a little bit of accent. Makes me feel at home.
You are a genius man, you have big co-hones to open that and rebuild such mechanical nightmare. I hope you work for yourself and get paid with no intermediaries. You deserve all the $ for such job. Thank you for a great auto mechanical lesson. Respect.
There are manual shift people and there and the rest of us. You really do learn early on which one you are. Always buy the correct transmission for your brain.
I wasn't surprised, it's a Nissan. So didn't expect it to last long looong time. I was expecting you to fix and put everything together and drive the vehicle again.
My prius had a cvt transmission no trouble for about 100,000 miles.I babied it for mileage.Now they built a cvt transmission with a 1st gear to reduce the stress from getting it started moving.
These are pretty robust units if maintained. It’s likely this transmission was run low on fluid causing low pressure due to a external leak. The fwd brake in the rear of the case rarely burn up on these RE5R05A units without low fluid concerns. The input clutch (4th gear) has a low torque capacity and usually is the first clutch to fail. Great teardown and explanation of the unit.
@@speedkar99 In a daily driver car that's not taking a shitkicking from the driver, the clutch should outlast the car. I literally revived a "shot" clutch by driving it; pretty sure it was glazed due to the previous owner slipping too much at every start, probably with the radio drowning out the (quiet) engine...
Excellent and thorough explanations. I learned more about transmissions in just under 14 minutes than i ever knew in any amount of years. With bonus tips on how to annoy my brother. invaluable!
I've always wondered if the introduction of more speeds in a transmission made automatics much less reliable. Older Chrysler and Chevrolet transmissions from the 60s and 70s seemed to last forever. With the introduction of overdrive and more speeds, it seems like failure rates for transmissions went up. Especially in Nissan and Chrysler products...
@@gorgeusjames I like sometimes to drive auto, and get that it fits better for some. Personally I like manual for the feeling of being in more total control.
You RE the One of the best auto repair channel show up every detail job thank you keepng more detail videos please cause we RE learn a lot of things from this channel
Thank you for the video! My '91 GMC with 300k miles has the same slipping problem in 3rd and 4th. The transmission was rebuilt a few years ago by the previous owner and its already failed. He's trying to convince me to rebuild it, but after this video I think I'll leave it as someone else's problem. :) Thankfully my daily driver is a manual. Currently at 275k miles with no drivetrain problems at all.
I'm an old timer and the best transmission I have experience with is the General Motors Turbo Hydramatic 400. Rugged and dependable but since there are only three speeds they quit making them decades ago
You gotta be makinbg some serious money fixing transmissions right? Cause you are a serious mechanic dude. And you can explain it clearly and concisely. Very professional sir. 👍🏻😉
.I am 81 years old and have been driving a long time. I never bought anything but standard transmissions for may years. I prefer automatics now, one for their ease of use and reliability. One reason I worked for 33 years in a transmission manufacturing plant. An automatic is pretty simple actually. The Model T Ford, 1909 to 1927 was a planetary transmission, it used bands instead of clutches. In case your transmission needs service, ask around to find a good shop. If you can find a shop that rebuilds race car transmissions you have struck gold.
I like everything about this video, from the derailed, easy to understand explanations, to the use of your brother's old clothes as rags, to the toothbrush pointer. Great job!
I was getting some slippage in my transmission. I drained the fluid, put in the specified fluid and replaced the filter and seal. I also added a bottle of lucas Transmission Fix. No more slips!
Another HUGE thing I see a ton of ppl do is not coming to a complete stop before the shift from reverse to drive..it drives me nutz bc it only takes an extra second to avoid unnecessary damage 😕
ok when my transmission goes on my truck can i have you rebuild it. i got halfway through the video and became very impressed that you are able to break this thing down and also explain exactly how all the components work together. I don't think anyone has actually broken down the functional's of an automatic transmission this well ever, at least from what i've seen. btw i have a 2015 Chevy Colorado z71 4x4 with the 6 speed and its more indecisive than my wife.
@@speedkar99 lol, well you could definitely do it, with the knowledge you have i'm sure you could do a quality rebuild with minimal effort and research
The reason why the high clutches go is because they have the most torque on them. The factory shifts them in early for fuel economy, but if the over drives shift in too early, they get excessively loaded and wear out. You can notice the early shifts if you listen for driveline vibration, like if you shifted a manual trans early. Lighten up on the gas and save your clutches. Also towing when not in "tow" mode will burn up the clutches.
Very well done! I loved the toothbrush, not to mention your "brothers old t-shirts" hehe, but the coolest was simply the speed and knowledge that just kept banging on! :D A great video, I had to see the whole thing even though I'll leave this job to the professionals.
Respect, complex . informative. u explained soo well . one thing i decided after seeing this vdo iam never ever gonna buy an automatic will be happy with a manual box. with a good torqy engine.
I drive my cars like there is an eggshell between my foot and the gas pedal. I always try to accelerate as slow and easy as possible under current driving conditions. This reduces the wear and tear on all the wet clutches and the bands inside the transmission during each shift. Periodically changing the fluid and filter also helps. If an automatic transmission is properly cared for and not abused getting 300,000 miles out of one is not that difficult.
@@speedkar99 Actually its a 2003 Ford Windstar that has 276,000 on it. These vehicles are notorious for having transmission issues. My transmission is original and has never been opened except to replace the fluid and filter and it still works just fine. Snail driver? No. I'm not suggesting driving 40mph on the interstate. What I'm talking about is not depressing the gas pedal all the way down to the floor every time I speed up. Hard acceleration is what puts a lot of wear and tear on the transmission and shortens its service life. It will also shorten the life of the engine and everything in the entire power train right down to the tires.
Praying to god I don't need to drop the valve body to replace the solenoids on my 2004 Toyota Camry U241E trans, I know there a few springs n things that can fall due to gravity, I don't have the time or equipment to pull the trans and rotate it so I'll have to be under my car to do all this. Fingers crossed. Your vids on ATs has been super helpful thank you brother.
I can see why it cost so much to fix automatic transmissions. And it requires your brothers complete wardrobe to clean up the mess! 😄
Yes it's quite expensive. Most might just swap in a rebuilt
lmao
Hmm hmm
And that was a 5-speed automatic... imagine now an eight-plus speed.
cheaper to swap than rebuilding it.
I'm 3 minutes into the video and already feeling anxious cause of all the parts! It was funny when you said "now I'm gonna remove all 12,500 and something bolts". You're very knowledgeable! Congrats!
There was a ton of bolts !
@@speedkar99 my 12 Nissan Altima's 2.5 transmission starts to make a humming sound when I drive it for a couple of hours, I live in Imperial ca and the other day I had to go to San Diego thru the 8 fwy, the elevation starts at 1000 feet and ends around 4180 to its highest peak, I have to pull out to let the tranny cool at least for 10-15 minutes then away i go but this time i have to drive it looking at my RPM's do not exceed 2200 rpm's (65 mph) it really sucks! Any thoughts on why?
Sorry for the long text!
@@310_Latchkey_kid You literally just said why. You kick the shit out of it daily at low RPMs on long, hard ascents. Drop a gear and rev higher. You're welcome.
P.S. As with Google Maps, lowest and highest points don't mean as much as "total ascent" (all the miles going up) and "total descent" (... and down).
HE TALKING ABOUT ALL THE BOLTS TO REMOVE TRANS from the car TO ? HE NOT A WIZ Kid ? BY FAR ?e if been around them 10 or more yrs ? i seen guys take them apart ? can't put them back ? OK ! MOST TRANS MIGHT HAVE THESE DAYS 2020 800 PARTS ! PLUS IF YOU WANT TO COUNT V BODY ? THAT'S A DIFF STORY ? WHO KNOWS ON THEM HOW MANY PARTS ! I BET HE DON'T EVEN KNOW ? I BEEN RE BUILDER 30 YRS TO every V BODY so DIFF ?
First time I've ever seen a transmission diagram. I love the quality of these videos.
Thanks. Check the linked video for the full teardown and explaination and more diagram
This is why I prefer manual transmissions. I’ve fully rebuilt two of my own but I would never dare to open up an automatic. You definitely have a lot of knowledge. Mad props sir.
Some manuals are complexe.. but in general it's quite simple. It also depends on what you call "rebuild"
If you change the berings only that's the easier way to fix, sometimes there's more 😉
I prefer manual transmission too.
Automatics require a knowledge of upgrades to failure points or high wear areas that can be improved - plus knowing the proper spacing of part & testing of oil passages - replacing parts means a short life of 30 to 50K miles - remanufactured is 120 to 200k miles
Automatics actually add power, that would have been lost.
@@frederickmfarias3109 At the time the engine puts its power to the input shaft, nothing on this earth will add power to the output shaft.
I like your advanced pointing device 😂
The teach-brush
@@speedkar99 🤣
That’s his brothers toothbrush 🤣🤣🤣🤣🤣🤣🤣🤣
@@speedkar99 Hilarious!!!
@@carlosg1165 LOL LOL LOL!!!!!
Just wanted to come by and say thank you for the incredibly detailed, short, to-the-point, informative videos. After watching your upper control arm video I immediately subbed, but something like this is next level in terms of complexity. Awesome, amazing work you're putting into these generalized videos, thank you!
Glad you subscribed and Happy that you enjoy my work
I love how you started it without the exhaust. Lol
I wanted to hear that raw exhaust out of the cats
@@speedkar99 Good of you boss...
that was a top tier edit lmao
Wow! It’s a small wonder modern automatic transmissions work at all so incredibly complex, great video great information
So basically everything in an automatic transmission is a failure point?
@@thealienrobotanthropologist excellent points!
Abusing clutches is a guarantee for premature failure.
Recently I got to experiment with the synthetic "Valvoline MaxLife ATF": its a far BETTER fluid than Honda DW1 mainly it has stable viscosity!
It gives consistent shift points and managed pressure for lower clutch wear 😉.
To be friend with your transmission: replace ATF early (20kMi without converter drain or 40k with converter) -
Buying a "dipstick evacuator" will pay for itself the 1st time.
👍
Yep. Except the user
@@speedkar99 well I mean, in many cases the user could also be considered a failure point 🤷
@@thealienrobotanthropologist thanks for the explanation.
I don't know much about automatics but he did say at 9:22 that the valve body is a big failure point 🤷
I hear alot of "don't do anything to the transmission or it will fail."99 Yukon 253,000 miles.Fluid is reddish brown translucent.I believe if I don't maintain it the filter could clog up and starvation will kill it.Many people don't think of the transmission until it slips try to save it then blame the flush or drain and fill.Not a transmission expert but heat and dirty fluid 🤞
Mad respect, I'm from Costa Rica, had to fix myself and learn from zero in order to fix my 2016 Mustangs 6r80. It was fun but took a long time.
I lost reverse, 4th and 5th for abusing the Transbrake feature at the drag strip.
I'm happy I studied the manuals and was able to change the clutches and now it drives again like a charm.
Loved seeing this since it reminds me all that experience
If i had the time id love to learn how to rebuild them , and carburetors
@@ThreeDaysOfDan Why on earth would you want to learn to rebuild a Carburetor? Cars haven't had Carburetors really silce 1989 when Fuel injectors were introduced and direct injection engines were designed... Unless your working on like a classic collectible car idk why you would want to learn how to rebuild one
@@gincoopland6545 because I own 4 cars with carbs..
He forgot to say, "My brother's toothbrush"😂
Oral B is my wife's toothbrush. My brother uses Colgate
@@speedkar99 lol
Ohh he replied 😂 still LOL
@@speedkar99 I love your videos man very educational stuff.
He puts it back after he's done with it.
I can see why rebuilt transmissions never work very long, they are pretty much unfixable.
Yeah there's alot to go wrong there
Its true, finding someone who knows what they're doing is almost impossible
And toothbrushes
@@XtheUnknown99 Not enuf brothers' old shirts to get the job done correctly.
yeah, most of the engine rebuild manuals starts with "clean place". A lot of shops are opposite of that.
After seeing this I’m surprised they work at all.
Haha
I'm amazed by how compacted it is
Excellent overview, succinct, no rambling like most videos.
Easily one of the most complex pieces of machinery ever created
My shift solenoid is attached to my shoulder.
Manaul transmission
Ha!
Manual is always the best
I hate auto tranies. Manual with no synchros.
@@Greenbearls if you can't find it, grind it.
Removing that transmission was a snap! Wonderful Nissan design.
they make it easy to own and then dispose 🙄
Step one remove engine
@@speedkar99 Funny, but it's the same on my 2005 Scion XB. Toyota is just as brilliant as Nissan, it turns out.
I almost thought it was a Ford.
@@Greenbearls You make great ham. I buy it sometimes.
Transmission's are no joke, I don't think I could ever work on one. Hat's off to the guys that design and repair transmissions.
Indeed. Quite complex
So many things to learn about cars, would gladly work as an assistant for free.
Me too
another cool breakdown. love your editing style. not a bunch of waiting and wasted time. rapid fire. excellent job.
Dude your the best automotive channel on UA-cam; knowledgeable and you actually show us stuff!
Thanks and that's what sets me apart.. I'd rather tear apart something real to learn myself and show you guys than draw, animate or just talk about it.
You are a genius sir, thanks for these greats explainations. Greetings from Quebec, Canada.
Greetings from Toronto Canada
@@speedkar99 I'm doing research as I'm looking at eventually pulling and rebuilding the Aisin TF-80SC in my '07 XC90 V8. I've seen probably a hundred videos over the years pertaining to automatic transmissions, and this video helped convey more understanding about the inner workings than all the rest combined. So thank you. Cheers from a fellow Torontonian :)
You are a natural instructor because you truly understand what’s going on. Well done.
Thanks I'm glad you appreciate my teaching style
@@speedkar99 I do, but I'm not so sure about your brother
A thorough and detailed explanation of the workings of an automatic transmission. You definitely know your way around them. Thank you for sharing!
Glad you enjoyed it. I've taken these apart before, see my teardown video linked in the video
This is the video that finally made me understand how clutch packs work, thank you for that 😃
the quality of your videos is fantastic, not a second of wasted time. Just directly to the point & explained so well for even the non-mechanically minded! much love from Australia!
Thanks I'm glad you appreciate my video style
I've been driving for more than 20 years. This video makes me want to learn to drive manual transmissions from now on.
Old reliable stuff is outdated. .. everyone wants new stuff so the automakers bend reliability in favour of more sales
Excellent tutorial, i especially like how you use the diagram to diagnose the issues. Automatic transmissions has always been such a mystery to until now - thank you!
Glad it helped you understand!
I have a cvt transmission and I love it! Some people say they hate cvt but I think it depends on the user or driver on how they drive
Now i understand why i'm so bad at mechanics ,I was just missing my brother's entire wardrobe.
It's critical
That is good stuff very funny LOL
Good and fast with much detail. I had flaring shifts in my 1996 Plymouth Voyager 2.4L with A-413 Torque-flite transmission, which is like the 1960's Chrysler 3-spd transmissions, but FWD version, which is much more pain to remove. I found several clutch plates worn down to bare metal. Interestingly, it had an extra steel plate in one clutch pack, suggesting the rebuilder (Certified Transmission label) had re-used worn clutch plates, filling the space with an extra steel. Chintzy approach since a clutch plate costs $2, but let them meet their 10K mile warranty. A rebuild kit only cost $100 and I bought the better dark "racing" clutch plates (graphite paper, HEM?). Your clutch plates will last much longer if you let up on the gas pedal when the transmission is ready to shift. I think that newer cars (since ~2010) do that automatically since the computer controls a motorized throttle and your gas pedal is just a "driver request". I disagree with "old Chryslers eating transmissions". I recently rebuilt the A-604 4 speed in our 2002 T&C 3.8L at 270K miles because I had a leak at the front which I though was from the front pump seal. It was pristine inside with the clutch plates worn 500K miles now. Chrysler transmissions in V-6 minivans which had problems were mostly due to shops refilling them with cheaper Dexron fluid (for GM), rather than the proper ATF+4, which causes shudder in the lock-up torque converter. Don't let monkeys touch them and they last.
Thanks for a great video! Informative, to the point, and great illustration of how the automatic works.
Thanks, glad you appreciate the video
My 96 G20 fwd went over 200,000 miles with no issues. Just changed the atf every few years, and never abused it.
Those were reliable
You are a great shop teacher! I like the tooth brush as a pointer. Thanks for sharing these great tips.
I changed the fluid in my truck's transmission last weekend. I can SMELL this video.
Nice, yep I sure smelled like transmission fluid when I was done taking this apart
Same haha. It sticks with you for life
I’m amazed that automatic transmissions can even work in the first place. The fact that people can drive a cad for 100k plus miles with a transmission doing all this work without the driver ever really even thinking about it.
Why? It’s actually more simple than a manual in many ways.
No gears to mesh. No synchros or dog clutches. No shift linkages, no throwout bearings.
Just clutches and bands that are activated in a certain sequence to hold sun, planet carriers, or ring gears still to make the gears you need.
In the old days it was super simple. Three forward gears plus reverse just needed two planetary gears like a Simpson gear set.
The valve body looks more complex than it is.
And all of those smooth shifts also cushioned by a torque converter means a lot less shock loads than a manual.
I live listening to this guy talking about shit I don’t understand before going to sleep. Great voice, great cadence, a little bit of accent. Makes me feel at home.
“Next I’m going to remove 12,552 10mm bolts”😂😂
Imagine if he edit that part with earrape😂
Most excellent!
I’m gonna clean up this here fluid “with my brothers old garments and undergarments.”
Your too funny Señor. I’ve been watching you for years.
Change the fluid and filter, nothing is “lifetime” fluid.
"lifetime ATF" was a sweet scam.
Now they use super low viscosity ATF MB-236.15 low lubricity too 🙄
@@glasser2819 life time means less then 50,000miles!!
Clearly you must be old school. My oil is lifetime. XD
Agreed
In a manual its lifetime...
You are a genius man, you have big co-hones to open that and rebuild such mechanical nightmare.
I hope you work for yourself and get paid with no intermediaries. You deserve all the $ for such job.
Thank you for a great auto mechanical lesson. Respect.
Thanks. I do this as my hobby. Maybe one day it'll be a career
I will just buy a manual transmission 😳😳😳
If you live in the US it’s a built in theft deterrent 😂 cuz no one can drive one 😂
Pretty hard to text and drive in one as well.
There are manual shift people and there and the rest of us. You really do learn early on which one you are. Always buy the correct transmission for your brain.
Text this again when your sitting in stop and go traffic.
@@TehKaiser
Maybe for kids nowadays, back in 2001 I used to text on my Nokia, smoke a cig, drink a beer and drive my manual GSX Eclipse 😆
My AT 350z had this issue. Slipping on 3rd and 4th gear. now this explain everthing. thanks
What did you end up swapping in?
@@speedkar99 still using it now. Lol
I wasn't surprised, it's a Nissan. So didn't expect it to last long looong time.
I was expecting you to fix and put everything together and drive the vehicle again.
No thanks. I was going to swap but quickly gave up
Google Man regular.
@@speedkar99 so you just dump the vehicle or sent it to transmission rebuild specialist? Or you replace the whole transmission with refurbished one?
@Google Man no such thing as a regular transmission.
You're an idiot. This car is very reliable. There's a reason you see them for sale with 250k and they're abused.
Man, you do the absolute best tear-downs!
I MADE A MISTAKE BUYING A CVT
WE GOTTA GO BACK, MARTY
CVT is the best in terms of efficiency but the worst in durability, if it's a good maintained CVT it can last you 200,000KM
@@ThexXxXxOLOxXxXx 200.000 is not much.
@@dieselgeezer18 im just trying to make him feel a little better he can sell it at 150k before cvt problems 😂
@@ThexXxXxOLOxXxXx hahahah😂
My prius had a cvt transmission no trouble for about 100,000 miles.I babied it for mileage.Now they built a cvt transmission with a 1st gear to reduce the stress from getting it started moving.
These are pretty robust units if maintained. It’s likely this transmission was run low on fluid causing low pressure due to a external leak. The fwd brake in the rear of the case rarely burn up on these RE5R05A units without low fluid concerns. The input clutch (4th gear) has a low torque capacity and usually is the first clutch to fail.
Great teardown and explanation of the unit.
A lot of clutches that can wear down overtime on automatics. Luckily a manual only needs one
True but that one clutch does alot of work
In a manual transmission, the gearbox can break.
@@vintagetriplex3728 synchros are often the first to go
@@speedkar99 In a daily driver car that's not taking a shitkicking from the driver, the clutch should outlast the car. I literally revived a "shot" clutch by driving it; pretty sure it was glazed due to the previous owner slipping too much at every start, probably with the radio drowning out the (quiet) engine...
@@fun_ghoul What? Pretty much all cars need a clutch replacement at 150,000 kms, give or take 30k
Great job of explaining how a auto trans works and what's wrong when it doesn't.
Thanks
Thank you for sharing all this knowledge.
Now that's a mess!!! I admire you for working on such a thing dude
Big mess....stain on driveway
Love your videos man.. Learning a lot.. Keep it up!!
Glad you enjoyed it
I don't know how you guys do it. Very impressive.
Thanks. New video dropping tomorrow on this same topic
Ahhhh, now I see why it's called INFINITY!
And beyond
Excellent and thorough explanations. I learned more about transmissions in just under 14 minutes than i ever knew in any amount of years. With bonus tips on how to annoy my brother. invaluable!
I just watched you remove and tear down a transmission without using every swear word the internet can come up with..... Clearly not human.
I don't swear. I probably would if I had to rebuild it
I've always wondered if the introduction of more speeds in a transmission made automatics much less reliable. Older Chrysler and Chevrolet transmissions from the 60s and 70s seemed to last forever. With the introduction of overdrive and more speeds, it seems like failure rates for transmissions went up. Especially in Nissan and Chrysler products...
This makes me feel comfortable driving a manual
Eventually you have to change your clutch.
Autos are for sissies
@@felixcat4346 MT is waaay cheaper to maintain, and work flawlessly for a very long time
@@gorgeusjames I like sometimes to drive auto, and get that it fits better for some. Personally I like manual for the feeling of being in more total control.
Awesome. Not everyone has that opportunity or luxury to drive what they want
You RE the One of the best auto repair channel show up every detail job thank you keepng more detail videos please cause we RE learn a lot of things from this channel
Mechanick's brother: "hav u seen my tshirt, sweat pants and my toothbrush?" Lol
Thank you for the video! My '91 GMC with 300k miles has the same slipping problem in 3rd and 4th. The transmission was rebuilt a few years ago by the previous owner and its already failed. He's trying to convince me to rebuild it, but after this video I think I'll leave it as someone else's problem. :)
Thankfully my daily driver is a manual. Currently at 275k miles with no drivetrain problems at all.
You must be grateful to your brother for the peripherals! 😆 What’s the best automatic transmission you came across given proper maintenance ?
I'm an old timer and the best transmission I have experience with is the General Motors Turbo Hydramatic 400. Rugged and dependable but since there are only three speeds they quit making them decades ago
nasedo3129 shame when GM has something good it seems to stopped being produced.
Toyota transmissions are usually the best. Aisin is the best auto transmission manufacturer.
How the hell humans figured out to build such complicated components and made it work! Speechless.. the brain is an amazing organ ! 💯
Thats why all manufacturers STOPPED manual transmission , they want to bleed your wallet
European manufacturers still offer most of their cars with manual transmissions.
dirk bomans that doesn’t be exported to other countries , you can wait few years and they will DISAPPEAR
@@Wan72_ Or, you can relocate to a more civilised part of the world ;-)
dirk bomans autos are only for people with physical disabilities in Ireland, mainly normal (manual) transmission
Not really. Since most people don't keep thier car past warranty they cater to those people
You gotta be makinbg some serious money fixing transmissions right? Cause you are a serious mechanic dude. And you can explain it clearly and concisely. Very professional sir. 👍🏻😉
I don't fix things I tear them apart
Thanks for your brother for sponsoring your videos with his cloth, underwear, and toothbrush.
Yep. Wife's toothbrush this time btw. Oral B
I just had a trans rebuild for my 99 Jeep WJ and it cost alot of money. This makes sense why.
Nice. It sure does cost alot of labor, not much in parts
this just made me paranoid over my auto transmission.
same, gonna go check my fluid levels lol.
That's why you buy a popular car so that when your transmission goes you can find another from a nearby scrapyard.
.I am 81 years old and have been driving a long time. I never bought anything but standard transmissions for may years.
I prefer automatics now, one for their ease of use and reliability.
One reason I worked for 33 years in a transmission manufacturing plant.
An automatic is pretty simple actually. The Model T Ford, 1909 to 1927 was a planetary transmission, it used bands instead of clutches.
In case your transmission needs service, ask around to find a good shop. If you can find a shop that rebuilds race car transmissions you have struck gold.
Is that your brothers toothbrush as well 😂
Oral B is my wife's
I like everything about this video, from the derailed, easy to understand explanations, to the use of your brother's old clothes as rags, to the toothbrush pointer. Great job!
Haha
Gotta use what I have
你拿的不是牙刷，是定海神针啊！
Translated: “You are not holding a toothbrush, but a Dinghai Shenzhen!”
I was getting some slippage in my transmission. I drained the fluid, put in the specified fluid and replaced the filter and seal. I also added a bottle of lucas Transmission Fix. No more slips!
2nd lol
First time I'm early for any of ur vids
Nice thanks
This video is an excellent demonstration of why all my cars have manual transmissions!
man I love u do u know that
Glad you like my video
WOW ! The comprehensive knowledge that you share is great! Thank you. Now I know i didn't waste my money when i did the drain and fill a little early.
You are welcome
holly sheeeaat, why AT don't all fail
Yes
Another HUGE thing I see a ton of ppl do is not coming to a complete stop before the shift from reverse to drive..it drives me nutz bc it only takes an extra second to avoid unnecessary damage 😕
I wish i had someone this knowledgeable in my area 🙌🏻🙌🏻 i would totally give my car for service here.
ok when my transmission goes on my truck can i have you rebuild it. i got halfway through the video and became very impressed that you are able to break this thing down and also explain exactly how all the components work together. I don't think anyone has actually broken down the functional's of an automatic transmission this well ever, at least from what i've seen. btw i have a 2015 Chevy Colorado z71 4x4 with the 6 speed and its more indecisive than my wife.
I can teardown but not rebuild haha
@@speedkar99 lol, well you could definitely do it, with the knowledge you have i'm sure you could do a quality rebuild with minimal effort and research
I'm so glad I found your channel. Your knowledge is inspiring.
This is one of the reason why i love manual transmission lol,Automatic is good only when its brandnew.
The reason why the high clutches go is because they have the most torque on them. The factory shifts them in early for fuel economy, but if the over drives shift in too early, they get excessively loaded and wear out. You can notice the early shifts if you listen for driveline vibration, like if you shifted a manual trans early. Lighten up on the gas and save your clutches. Also towing when not in "tow" mode will burn up the clutches.
Drive style and programming has alot to do with it. As well as design and manufacturing
Very well done! I loved the toothbrush, not to mention your "brothers old t-shirts" hehe, but the coolest was simply the speed and knowledge that just kept banging on! :D A great video, I had to see the whole thing even though I'll leave this job to the professionals.
Respect, complex . informative. u explained soo well .
one thing i decided after seeing this vdo
iam never ever gonna buy an automatic
will be happy with a manual box. with a good torqy engine.
Ur channel and Chrisfix are my favorites automobile channels!!
2:41 that caught me off guard i’ve been laughing for like 5 mins 😂😂
Love the format, concise and to the point!
Now you are only missing one thing:
HEEEEEY GUYS! CHRISFIX HERE.
Your videos are like therapy...If you need a hand I'm in Tucson.
Much respect and admiration for your technical skills.
Amazing work, i know this tear down took many hours.Thank for sharing
Well maintained automatic transmissions on 1990’s Ford Falcon taxis in Australia routinely did 500,000 kilometres.
One of the best commercials for an electric car I've ever seen!
Even after watching your well presented video, these transmissions remain mysterious and far beyond my understanding. But thanks anyway.
Watxh my how transmission works videos
More videos like this. Please. 🙏thanks for this video. I like watching videos about transmissions.
Glad you enjoyed it.
Perhaps a dual clutch teardown video?
Love your videos man, keep up the work speedkar!
I drive my cars like there is an eggshell between my foot and the gas pedal. I always try to accelerate as slow and easy as possible under current driving conditions. This reduces the wear and tear on all the wet clutches and the bands inside the transmission during each shift. Periodically changing the fluid and filter also helps. If an automatic transmission is properly cared for and not abused getting 300,000 miles out of one is not that difficult.
Snail driver eh....do you have a Corolla?
@@speedkar99 Actually its a 2003 Ford Windstar that has 276,000 on it. These vehicles are notorious for having transmission issues. My transmission is original and has never been opened except to replace the fluid and filter and it still works just fine. Snail driver? No. I'm not suggesting driving 40mph on the interstate. What I'm talking about is not depressing the gas pedal all the way down to the floor every time I speed up. Hard acceleration is what puts a lot of wear and tear on the transmission and shortens its service life. It will also shorten the life of the engine and everything in the entire power train right down to the tires.
Praying to god I don't need to drop the valve body to replace the solenoids on my 2004 Toyota Camry U241E trans, I know there a few springs n things that can fall due to gravity, I don't have the time or equipment to pull the trans and rotate it so I'll have to be under my car to do all this. Fingers crossed. Your vids on ATs has been super helpful thank you brother.
I have a video I posted a few weeks about the Camry transmission. It was a tough job dropping that valve body
first video i watched from this channel. subscribed.
I had dreams of being a mechanic but after furiously trying to (and failing to) keep track of all these parts my dreams have been shattered.
Rebuilding transmissions isn't the job of a mechanic