1 Point Hitch and Implements
Вставка
- Опубліковано 15 жов 2020
- Over the years I have collected and made several implements for my GT6000. This is a walk around with a few simple demonstrations.
WARN 69373 Winch Roller Fairlead
amzn.to/3557WYn
MotoAlliance Impact Implements Pro 1-Point Lift System for ATV/UTV with 2 inch Receivers
amzn.to/35bW1rY
Brinly BS-38BH Sleeve Hitch Tow Behind Box Scraper, 38-Inch
amzn.to/345dzqk
MotoAlliance Impact Implements Pro Cultivator for ATV/UTV with 2 inch Receivers
amzn.to/2T3njLb
MotoAlliance Impact Implements Pro 3-Position Blade w/Box Ends for ATV/UTV with 2" Receivers
amzn.to/3k15hoO
CURT 45006 Bolt-On 2-Inch ATV, UTV Trailer Hitch Receiver Adapter
amzn.to/3o8O5QS
Reese Towpower 81378 Class II Step Bumper Receiver Hitch, Black
amzn.to/37b5MZW - Авто та транспорт
Wow! Just what I was looking for. I was starting to seriously regret buying my 1 point wheelhorse. Now I can buy / create implements to do more than just cut grass and push gravel and loose dirt. TYVM
Thx, buddy! You just gave me solutions and inspiration to build stuff to my lawnmover. I absolutely ❤️ this! Joa in Sweden.
Dude i just finally found the correct size drive belt for my gt6000. An now im looking for what all attachments went for these little beasts. After seeing this i might just make what i need. Awesome demonstration. Thanks man
I was actually most impressed with the unit you built out of a hot water tank. You remind me a lot of myself 👍👍
Really great ideal’s and work well to
Keep thinking 🤔
You have taught me so much today thank you 🙏🏾
Awesome creativity. Thanks for this helpful implement review.
Nice set up.
Love you and your video😊
Instead of a hand crank I'd put an electric motor on it.
Probably something like a windshield wiper motor. They are 12v with gear reduction and usually variable speed. Should be easy enough to mount then add sprockets and chain.
This is glorious omg thanks
If you weld a 6-in bar on top of your latch going straight up and then tie the rope to the top of it that'll give you a more leverage and save you on ropes. Probably make it easier to open too. At any rate awesome setup. I wouldn't mind having something like that around
thanks for share
Subscribed
Just bought my 1995 Gt6000 18hp Kohler w 6 spd hi/low in good cond for 100 bucks! ! I was worried because its missing the bottom triangle of the sleeve hitch. However you solved my problem! Thank You!!!!
grads to the score! best 100$ youll ever spend
Time to modify that rear winch and 1pt hitch. Put a pulley on the crank rod where the handle attaches and move your winch to the top of the 1pt hitch and now you've got remove work on the fly.
Could you back a back blade for a john deere 739 that i could use to back into places and drag snow out of with a 12 volt lift
What part of Maine do you live in? I lived in Newport just off of rt7 good job putting your stuff together!
What is the point of the lock nuts on the shaft?
I’m just curious on where you got the plows
Hey brother what part of Maine are you from .I'm in Glenburn just outside of bangor.
What transmission does that trctr hv and what hp
1:04 Warn I hear you say Warren
What would be you suggestions for breaking ground on a old gravel driveway with really compact soil.. almost all gravel is gone
Really over grown
Hasn't had much love in years. Suggestions so I don't waste my money 💰
If it was me I would go with a cheap ripper amzn.to/3E0puHr
Do you find that those chains help your turf tires grip? I’m debating on ordering chains for mine. Thanks!
I’ve got chains on my cub cadet. Put them on to mow my field with a pull behind brush hog and just left the chains on cuz they helped a lot with traction anywhere. Highly recommend.
Love your stuff !! Just found you and instantly subscribed.
Did you say your GT6000 has a Roper transaxle ? I just watched your tug of war video and you said it had a Peerless 633. Did you swap out at some point ? Did you do a video ?
It's a 633A Roper but at one point was supported by Peerless. Now all support for them is discontinued.
@@redneckcomputergeek Was the Peerless/Roper 633 original to your Craftsman GT6000 ?
I'm looking for a trans with hi/low for my Craftsman but not sure how to figure out which old models have this.
Fucking cool shit man/
Is the jeep Cherokee for sale
Would you consider that a tractor and not a lawn mower
I'm having a hard time finding a replacement seat any ideas
I know this was a little while ago when this comment was posted, but if you still are having trouble I would suggest going to a steel pan seat from an older garden tractor. I put one on my 1844 mtd and it worked great.
ebay
3:13 lol
God damnit hill Billy
6-18-24 Amazon $159.99 one point hitch
Yup company got bought out. But being the only one on the market they get to set the price.