The "chains" on the back look really good! On the front of my Simplicity 4041, a 1500 lb machine, for snow plowing, I deflated the front tires, added a #40 roller chain on the center of the tread and re-inflated them. Gives much better steering on the ice when pushing snow.
HA !! But the mower deck was working as a secondary plow !! Also could blow off a dusting of snow !! He can cut, weld, build his own chains but those 'Quick Pull Clips' are a MOFO🤯...🤣
If it were me, I'd try it with the mower deck still on. Remove it if it becomes a problem. Besides, this is giving testimony to how well his homemade chains are working! I like the quick time lapse and no blah blah blah.
Супер! Снизу к отвалу надо приделать резиновую ленту Я привинчивал полосу вырезанную из автомобильной покрышки, та часть где протектор. Она жесткая и износостойкая. Тогда отвал не будет портить поверхность и прыгать на неровностях.
Jako dobar klip prijatelju,korisna stvar ko ima recimo ovaj traktorčić ili kvad ili četvorotočkaš,a pre svega srećna nova godina i tebi Doktore a i svima koji čitaju ovaj komentar....puno pozdrava društvo 😉💪❤️
Not a bad idea. I don't know what advantage there would be to front chains when most lawn tractors are only 2-wheel drive. I was surprised to see the blade because you could have probably blown the snow off with your mower deck.
Very cool, thought of similar. However hows that treat your driveway after 2-3 years? Asphalt is going to get torn up quick, and concrete is going to wear. Maybe same idea with some sort of industrial rubber/conveyor belt treads? Chains wouldn't work about as well?
Hey bud nice craftsmanship, but I'd like to offer a word of caution from a guy who works on mowers for a living. Your chains are going to beat your transmission to death. The repeated jarring and bouncing causes the top of the transaxle case to break up and the bushings will crack as well. I've seen it first hand with craftsman poulan and husqvarna tractors and it appears your machine is made by the same ayp group. Wheel weights would help but unfortunately the extra rotating mass ends up tearing up the brass worm gear inside the transaxle. Your best bet is to fluid fill the tires and stud the tires if you have enough lug depth on them and add a small weight box. If you want any help or suggestions on doing anything of those things send me a message I'd be happy to help.
normal tire chains are better then the item in the video ,, extra weight is a must to keep the slipping down ,, also removing the deck will help save the deck from breaking the hangers from the rough work of plowing ,, also make sure the tires are not froze in the ground ,, seen a axle break when a customer tried too drive the mower that was stuck solid in frozen ground ..
Because of the open differential. The right wheel is the only one that spun Because it had less grip than the left. If the right had more grip the left would have spun. In a nut shell, in a system with an open differential, power will be sent to the wheel that spins with the least amount of torque. You can see that the tractor has an open differential when he turns one wheel making the other turn in the opposite direction. There are oodles and oodles of videos on UA-cam about how every kind of differential design works, including open, limited slip, automatic locking and selectable locking.
better steering on ice, no other reason, but the crossbars were really redundant. just chains alone do work better because the tire slips sideways, a straight peice of iron across defeats the purpose. for the rear, perfect 👍
Absolutely brilliant!!! One question? Does the tires with the chains on tear up the yard? Also does it leave scar marks on asphalt? Happy New year good Sir
Excellent Design - The Simplest things in life are the best - like fresh is best naturally. The only thing I would add is some rubber padding on the L shape parts or even something for example as simple as garden hose one size + . This way it will two things - protect + being quieter. 👍🏅
you put the chains on back ward, well in forward if you put the small side of the angle iron first then the longer side going back ward its more stable cause the long side is pushed against the tire! Just my two cents worth , Im only trying to help.
front tires are a waste if not 4 wheel drive .. should also remove the mower deck it will cause the deck hangers to break due to the rough driving of snow plowing .also said in text in the video he removed the front chains
I really like your idea . Chain , 1 inch angle iron and I can use my old craftsman to spread dirt better. My Craftsman Bull dosier build has moved a lot of dirt and gravel but mud stops it cold .
Hey if you want even MORE traction I would suggest putting them on opposite sides, backwards of what you did.. Just my thoughts when I saw it, let me know if you try it please.. #1- Your going to get a much better, deeper edge with the snow being able to sink into the tire tread before hitting the 90° edge opposed to the flat part of the angle iron contacting the ground first and limiting it's bite the depth of that edge minus the thickness of the gauge opposed to coming from the other direction.. #2- If you're losing traction, tire begins to spin and then the edge catch's on something solid I think that stress would easily flex the the front edge of the angle iron off the tire tilting your 90° biting edge back on an angle causing loss of ultimate traction.. Where if it's backwards it would have the full width of that angle iron pressing against the tire acting as a brace to keep it close to 90° and prevent it from just twisting everytime it's stressed causing loss of traction.. ( If using strictly for snow on pavement or concrete this probably wouldn't apply but I think most people's comments and interests were to make a set for added traction 'off-road'.. Comment if you agree or disagree or have tried.. that's how we learn !! 👍
С новым годом 😀🎉🎉. На передних колесах, на уголках, при варить дополнительные зацепы, от бокового заноса. На МТЗ применяли.Надеюсь переведут правильно. 🤝👍
We made these years ago for bob cat applications. They didn't hold up we utilized different type of materials. It was cheaper in the long run to buy factory tracking.
It’s awesome as long as you understand that you are destroying your lawn under the snow and come spring your going to have tractor tracks going back and forth across your yard but still very cool idea 👍
Did the front help with steering at all? In slushy conditions, and heavy wet snow, I have difficulty steering. I turn the wheel but keep going straight.
It seems the chain is galvanised: the good weld practice is to remove the zinc before welding. Did you considered any spring or rubber to tension the chain rather than enflate the tyres?
The idea seems interesting in terms of increasing traction. But it also increases the stress on the ball bearings of the wheels and the steering. If I were you, I would keep a close eye on these elements. While watching the video, we can clearly see that the entire tractor is subjected to the jolts produced by these chains.
I know some guys that used their lawn tactor to plow or bought a snowblower for the front. They used chains on the rear but they had to add weight to the rear of the machine to get enough traction on ice even with the chains.
@@georgesebastian6306 it's not enough weight to do any good and it's collecting snow in front of it slowing it down and requiring more traction to move.
First of your videos I’ve seen. Excellent! Now, about the security fence…. The horizontal at the top should point to the outside of your property. Pointing inwards it’s ineffective.
Happy New Year 🧨🎇 And enjoy the video 🎞🚜🌨
Hvala i tebi jedno ljepa godina 2022
Hvala i tebi također sve najbolje u novoj godini 🎉🎉🍾
6:59 samo stavi par vreća cementa u gepek od bmwa i ide
Cu siguranță mioi face si eu pe tractorasul de gazon și pe atv. 😉👌👨🔧👍🤗💯♥️
The "chains" on the back look really good! On the front of my Simplicity 4041, a 1500 lb machine, for snow plowing, I deflated the front tires, added a #40 roller chain on the center of the tread and re-inflated them. Gives much better steering on the ice when pushing snow.
Ич
Excellent. My next project. Too many negative comments here, give this man credit for being creative. Or just shut up.
Those are the only choices huh? That's a pretty negative comment there.
@@percyfaith11 Do you want some tissues for the tears crybaby
Happy 2022 Doctor D.S.
Try losing the mower deck during winter.
That’s just multitasking like real men do
Why do you need chains on the front wheels? Is the mower four wheel drive?
Steering
Makes it easier to plow and go off road if you take the mower deck off
@@tsutomutkahashi8018 4ß
11ax
Drop the mower deck & you could really go anywhere
How about video on how to take mower deck off ...? Dr ...?
HA !! But the mower deck was working as a secondary plow !! Also could blow off a dusting of snow !!
He can cut, weld, build his own chains but those 'Quick Pull Clips' are a MOFO🤯...🤣
Predobre ideje imas svaka cast 💪
Excellent job really useful 👍 👏
Happy 2022. Great idea my friend.👍👍
Svaka čast majstore super ideja
Whether in the manufacture, installation and use, it's simple, fast and efficient at all levels
Думал час будет кучу снега гребсти а тут и метлой снег можно было вымести😅😅😅
Dude take the mower off, for one you get the salt on mower it's going to rust badly, that's why they came out with tractor weights?
Not necessary having that blade
No don't it adds weight and the more weight the better
Snow Sweeper attachment instead of mower blades 👍
If it were me, I'd try it with the mower deck still on. Remove it if it becomes a problem.
Besides, this is giving testimony to how well his homemade chains are working! I like the quick time lapse and no blah blah blah.
The mower deck adds ballast and lowers the center of gravity.
Супер!
Снизу к отвалу надо приделать резиновую ленту Я привинчивал полосу вырезанную из автомобильной покрышки, та часть где протектор. Она жесткая и износостойкая. Тогда отвал не будет портить поверхность и прыгать на неровностях.
Najlepszego w nowym roku! Doctor D.S. włącz kosisko do trawy.
Problem solved!!! I love your genius idea!!! My dad would love you!! Now put them on the market so I can buy them!
Awesome! One recommendation, put high spot welds on the top of the bars. On side hills you now have skis.
Супер. Молодец. Браво. Лайк. Так сделаю себе на минитрактор. Пламенный привет с Татарстана г.Агрыз Россия 🇷🇺🖐️🤝👍🇷🇺🇷🇺🇷🇺
Jako dobar klip prijatelju,korisna stvar ko ima recimo ovaj traktorčić ili kvad ili četvorotočkaš,a pre svega srećna nova godina i tebi Doktore a i svima koji čitaju ovaj komentar....puno pozdrava društvo 😉💪❤️
❤❤❤
Not a bad idea. I don't know what advantage there would be to front chains when most lawn tractors are only 2-wheel drive. I was surprised to see the blade because you could have probably blown the snow off with your mower deck.
THIS GUY IS A GENIUS I LOVE HIS IDEA IT'S A PROBLEM SOLVER.
More like a problem maker if he truly expects the light duty transaxle to handle the load of a huge blade and added traction. Jeeeez Louise!
It’s a great idea for the back tires only thanks for the video
Great idea🏅🏅🏅👍👍👍
Sretna nova godina.
Bust up the pack and ice too ! BRAVO
Your the best 👌thanks for sharing 👍I need that for my tractor 🚜 cool.
Kind regards from London UK 🇬🇧.
Wow. These are the best tire chains/tracks I have seen and easy to make. Good job. I may build a set for full size tractor that had turf tires.on it.
Ive been thinking about building a drop axle off the rear pto and finding tracks but have had trouble finding tracks. These are a perfect idea
sretna nova doktore😉
Srecna nova godina❤️, jako mi se svidja tvoja kreativnost bukvalno kao moja 😂
Very cool, thought of similar. However hows that treat your driveway after 2-3 years? Asphalt is going to get torn up quick, and concrete is going to wear. Maybe same idea with some sort of industrial rubber/conveyor belt treads?
Chains wouldn't work about as well?
Chains make the ride as rough as hell, carbide studs tear up concrete and blacktop. Not sure their is a good solution.
Happy new year Doctor D .S
all you need is a workshop, appropriate tools, materials, skills, and time, as well as need - where I live there is no snow - ever!
Hey bud nice craftsmanship, but I'd like to offer a word of caution from a guy who works on mowers for a living. Your chains are going to beat your transmission to death. The repeated jarring and bouncing causes the top of the transaxle case to break up and the bushings will crack as well. I've seen it first hand with craftsman poulan and husqvarna tractors and it appears your machine is made by the same ayp group. Wheel weights would help but unfortunately the extra rotating mass ends up tearing up the brass worm gear inside the transaxle. Your best bet is to fluid fill the tires and stud the tires if you have enough lug depth on them and add a small weight box. If you want any help or suggestions on doing anything of those things send me a message I'd be happy to help.
Had a craftsmanship...rear end went bad.....they are light duty transmissions...don't over stress them
normal tire chains are better then the item in the video ,, extra weight is a must to keep the slipping down ,, also removing the deck will help save the deck from breaking the hangers from the rough work of plowing ,, also make sure the tires are not froze in the ground ,, seen a axle break when a customer tried too drive the mower that was stuck solid in frozen ground ..
Odlicno... Nocas bit ce mozda snjega i dobro bi dosla takva ralica 😀 Sretno u 2022-oj i puno novih ideja ti zelim. Veliki pozdrav iz Slovenije.
❤❤❤❤
Da li je itko pravio ove pance za terenca i kako se ponasa s ovim lancima?jer ih sebi mislim napravit
Great idea. Wondered if instead of angle iron sections maybe sections of chain might work to conform to tire better. 🤔
Chains were used over 100 years ago!
So you mean like tire chains lol
That’s literally just a tire chain
Why put chains on both if only the right rear wheel drives?
I guess it just looks good since all wheels then have chains on them?
It kinda looks like tank tracks...
But yes, it just looks good.
Because of the open differential. The right wheel is the only one that spun Because it had less grip than the left. If the right had more grip the left would have spun. In a nut shell, in a system with an open differential, power will be sent to the wheel that spins with the least amount of torque. You can see that the tractor has an open differential when he turns one wheel making the other turn in the opposite direction. There are oodles and oodles of videos on UA-cam about how every kind of differential design works, including open, limited slip, automatic locking and selectable locking.
better steering on ice, no other reason, but the crossbars were really redundant. just chains alone do work better because the tire slips sideways, a straight peice of iron across defeats the purpose. for the rear, perfect 👍
Great job ! Looks like you should patent the chains and market them!
Absolutely brilliant!!! One question? Does the tires with the chains on tear up the yard? Also does it leave scar marks on asphalt? Happy New year good Sir
It does not leaves scars
Excellent Design - The Simplest things in life are the best - like fresh is best naturally.
The only thing I would add is some rubber padding
on the L shape parts or even something for example as simple as garden hose one size + .
This way it will two things - protect + being quieter.
👍🏅
Regular tire chains would have been my choice.
you put the chains on back ward, well in forward if you put the small side of the angle iron first then the longer side going back ward its more stable cause the long side is pushed against the tire! Just my two cents worth , Im only trying to help.
Any difference in traction if the “L” of the angle iron faces in driving direction front or rear?
Great idea 💡 thanks for sharing. I just wish I could have some snow this decade 😩 lol.
That is awesome!! Please give an update on how well they are holding up.
I don't understand the chains on the front tires? These are not drive tires, so they don't need traction in my opinion.
8:22
If you're on ice front chains might be necessary for steering
front tires are a waste if not 4 wheel drive .. should also remove the mower deck it will cause the deck hangers to break due to the rough driving of snow plowing .also said in text in the video he removed the front chains
Awesome Work nice to seee goin to give it ago we got lots of Snow Goin to build for My Quad see what happins thks again Keep them Comin Farmer
that will raise alot of hell on the cement !!! 👍👍
Homemade SNOW PLOW for LAWN TRACTOR / QUAD !?
ua-cam.com/video/mmCYMVjXh5I/v-deo.html
Homemade EXHAUST For TRACTOR MOWER !?
ua-cam.com/video/v31l3x-1EWk/v-deo.html
Doctor ds you got me! I try and swipe your dang notifications every time I see it!
how much time did it took you to made the rear chain?
Great video
I really like your idea . Chain , 1 inch angle iron and I can use my old craftsman to spread dirt better. My Craftsman Bull dosier build has moved a lot of dirt and gravel but mud stops it cold .
Brilliant!
I had a lawnmower like tgat that I was using for getting wood , and it was spinning like mad , if only .....
Thank you very much
No good on ice bit of a slope it will slide sideways like it's got skates on just like Dozer tracks if you don't have growser bars on them
Hey if you want even MORE traction I would suggest putting them on opposite sides, backwards of what you did.. Just my thoughts when I saw it, let me know if you try it please..
#1- Your going to get a much better, deeper edge with the snow being able to sink into the tire tread before hitting the 90° edge opposed to the flat part of the angle iron contacting the ground first and limiting it's bite the depth of that edge minus the thickness of the gauge opposed to coming from the other direction..
#2- If you're losing traction, tire begins to spin and then the edge catch's on something solid I think that stress would easily flex the the front edge of the angle iron off the tire tilting your 90° biting edge back on an angle causing loss of ultimate traction.. Where if it's backwards it would have the full width of that angle iron pressing against the tire acting as a brace to keep it close to 90° and prevent it from just twisting everytime it's stressed causing loss of traction.. ( If using strictly for snow on pavement or concrete this probably wouldn't apply but I think most people's comments and interests were to make a set for added traction 'off-road'..
Comment if you agree or disagree or have tried.. that's how we learn !! 👍
You made a monster tractor Dude 😂 I mean look at it Broh that's awesome 👏🙌
С новым годом 😀🎉🎉. На передних колесах, на уголках, при варить дополнительные зацепы, от бокового заноса. На МТЗ применяли.Надеюсь переведут правильно. 🤝👍
Ovo kad' pogledam, odma' mi gusjenice padnu na pamet... 😂🙄😅
😂😂😂
Great idea.Happy New Year everyone./Odlična ideja. Srećna Nova godina svima.
We made these years ago for bob cat applications. They didn't hold up we utilized different type of materials. It was cheaper in the long run to buy factory tracking.
It’s awesome as long as you understand that you are destroying your lawn under the snow and come spring your going to have tractor tracks going back and forth across your yard but still very cool idea 👍
Now that is a really cool idea 💡 nice job
Did the front help with steering at all?
In slushy conditions, and heavy wet snow, I have difficulty steering. I turn the wheel but keep going straight.
Why do the front tires if it’s not 4x4.
Now I need to look for scrap bed frames in the garbage
Wow..nice homade.. good job my friend
i would try notching the center of each cleat to prevent lateral movement on ice
coming soon how to replace mower transmission
crazy , regular pair of chains cut off will do the same thing
It seems the chain is galvanised: the good weld practice is to remove the zinc before welding.
Did you considered any spring or rubber to tension the chain rather than enflate the tyres?
The idea seems interesting in terms of increasing traction.
But it also increases the stress on the ball bearings of the wheels and the steering.
If I were you, I would keep a close eye on these elements.
While watching the video, we can clearly see that the entire tractor is subjected to the jolts produced by these chains.
Nice mower
those are more like the steel tracks for a wheeled bobcat than tire chains. awesome idea!
There needs to be a weak point somewhere in the drive system and you will find it now. Either the axles or the transmission will go next.
How are mud tires no different? It's what I have on mine.
Great job but I don't understand why you still have your mower on in winter??? I'm sure that creates drag!
Does it work in heavy load like pick up truck?
I know some guys that used their lawn tactor to plow or bought a snowblower for the front. They used chains on the rear but they had to add weight to the rear of the machine to get enough traction on ice even with the chains.
Genius idea!! Well done!
Can i apply this on muddy road with my farm tractor
any info if i can use this in my 75 hp farm tractor
@@eduardodeveyra3409 Why not?
Phenomenal work getting those chains that tight on your tires. Bravo
Stop and think for a second, this was never tried before? This didn't work very well? O yea, chains is what works!
Thank you 🙏 great 👍 work and nice 👍 toy 🚜 .a little welding,a little cutting, =snow mower Brrr 🥶
Скоро будут новые подшипники нужны
Jel imas video sto si radio ralicu?
I never seen a man to weld so quick.
Great video! Need something on the front tires to help with steering on ice!
How much you want to sell them for, or how much to make a set
That was downright awesome I could use a set of those we got 16 in here
How much would you charge to make those I have the same mower
I'd drop the mower deck. Great idea!
Leave it on for weight!
@@georgesebastian6306 it's not enough weight to do any good and it's collecting snow in front of it slowing it down and requiring more traction to move.
Turn the mower on to dry the drive way all in one pass.
@@timhansn362 IT will blow light snow but packed snow it will not I played around one year moving mowers in the snow ,,
@@georgesebastian6306 the deck will break ,, the hangers that are welded onto the deck to hold it to the mower will rip loose ..
頭良いな!
great job!
Da li mogu da se kupe takvi lanci po meri?
Unless that thing is front wheel drive putting them on the front is a waste
Why isn’t the mower deck removed??
You want to keep any Extra weight
Those are cool, however tear the hell out of asphalt driveways.
What's the point in going overkill on the welds but use those cheap carabiners (If u wanna classify them as such lol)?
First of your videos I’ve seen. Excellent! Now, about the security fence…. The horizontal at the top should point to the outside of your property. Pointing inwards it’s ineffective.
Maybe 🤔 it’s time for a Lincoln locker 🔐 on the back end!