Thanks for the video!! Some great ideas in here as I'm about to make a cleat wall myself :). One small issue though as it scares the bejesus out of me watching it.... using gloves with a table saw... While it totally seems like the gloves would add more protection (even if they're "cut / knife resistant"), the issue is the teeth of the blade will grab the fabric and pull it into the spinning blade. Basically instead of protecting the hands from nicks, it's presenting a way for the blade to grab and pull your hand into it and keep it there (meaning you won't be able to pull your hand away as the cloth continues to get wrapped into the blade). The only way to save yourself at this point is to shut the saw off, and your hand(s) will have suffered tremendous damage. Hence please please pretty please, don't use gloves!! :) Also a pushstick is highly recommended for cuts with a width less than the width of your hand. Keep making great content!!!!
I was cringing BIGTIME watching that also!! That's definitely Rule #1 & is a MAJOR no-no around basically almost any kind of spinning/rotating tool or machine. It's just an accident waiting to happen in my opinion, that's for sure. Maybe on the next one, consider leaving out 95% of the gluing & the finger-spreading footage, as I'm pretty sure that we're all aware of how it's done...other than that, nice build!
Looks very good, a great video. I have my cleats on the wall ready but still have other things to finish off such as a workbench. Cannot help indulging myself in ideas and inspiration from other people though. Thanks for sharing 👍👏👍👏
When the next to last was being placed, but fell on through, that is when I realized things like that really do happen to other people - not just me. I'm still laughing about it,. AS great video as well as the others. Keep up the quality build, it looks great.
Using gloves on a table saw is a bad idea. We had an accident I a company I have worked. A guy almost cuts his hand in half because he was using gloves on a table saw
Ive been doing it 20 years never had a problem you just have to pay attention..Im never going to stop wearing work gloves and Im certainly not taking em off for every cut
NEVER use gloves while working with rotating machinery. It's better to get cut or get wacked than getting pulled towards the machine by the gloves. Learnt that the hardway using a drill press, almost broke a couple of fingers.
@@matthewsynoradzki4656 i ve been doing it for a long time does not make it safe in my opinion. But hey what do i know..if you feel comfortabel doing it like that great. But many People watch these UA-cam video's so it would be nice to see People doing it safe so others will too..
Hi, I used your video as a guide in my garage for "some" of my tools. I also used laser printed tool holders by Leverage Designs that fit into the battery slot of my tools (Ryobi) and laser printed clips that hold my batteries too. Screw the holders into a board and they hold the tool, hanging via the battery slot. I still needed cleat holders for my circular saws and misc tools though and it was a lot less complicated than creating the little pieces to hold a tool in place. Thanks for the ideas.
If you hold shift on your keyboard and hit the arrow right key the video goes to 1.25 speed. If you do it again it goes to 1.5. Two more times and you're at double speed. That's where I ended up.
Just a reminder... Nails can turn and bite a finger occasionally... Never put any part of yourself in that zone of nail length. This is true of every size right up to 16d for framing houses.
Yes, most definitely...they can, will & DO make that u-turn that will turn around to get you...almost always when you aren't paying attention to if it could happen, that's when it does!! And ESPECIALLY 16d nails!!
Thank you! Most tools today are with a battery and even I convert to battery tools as much as possible but i still had some with cord and this was the best solution i could come up with. I think a pipe would have been even better, less friction.
Looks great. Well done. For gluing "A Glimpse inside" channel showed how to use PVA and CA glue (with accelerator) together when gluing and it saves the need for clamping when fixing screws or brads. I use it all the time and recommend you have a look if you get time. Awesome technique. Thanks for the top quality vid!
Thanks for the advice! Yes i have seen it being used many times and i will probably end up doing the same. But for now normal glue will have to do, i simply just don't have all the bells and whistles yet :)
Great ideas!!!!! I just finished the cleats and ready for holders. By the way.... i winced when i saw you using the nail gun. I am VERY careful and last weekend i shot a nail into my ring finger. OUCH great ideas for holders Cheers
I recently bought one of those adapters you put on a drill, maybe not what you are looking for but this fall/winter i will for sure make more holders, i still have a lot to hang up!
There is only 1 more outdoor video I will post and after that, I'm back inside and i will start with some more innovative french cleats designs. This winter will be some intense projects!
Really like your channel but i also agree, i wouldnt recommended doing what you done here 19:00 but its up to you if you feel confident enough to pull wood from a moving saw.
'all my most important tools at arm's length' - you must have awfully long arms- that wall looks around 3 metres. I envy you having so much spare space- my small workshop is crammed. Such widely spaced tools and gaps are not possible for me- indeed I have to use the same space more than once. For example, I have a piece of wall that, when I am using my MFT for woodwork has the nearby wall cupboard double folded into the space, holding all my dogs, clamps, etc. When I am using my milling machine a board holding all my milling tools slides from the enclosure behind the mill into the space. If doing electronics, a unit swings down from the ceiling holding my scope, power supply, components, etc. Never needed together, so no conflict, and space used three times. And all actually within arms reach...
For a guy that is so dexterous and precise with his wood working, your quite clumsy at putting your tool bits on the shelf! 😊 Just joking, I really love your videos; excellent demonstration of builds, ingenious ideas, beautifully shot and great humour. You have given my inspiration for my new workshop. Much appreciated.👍
Great video, and excellent craftsmanship. Thank you for creating and sharing this. Q - what kind of nailer is that that you're using? I see the brand name "Rapid". Is that a 23-ga pin nailer?
Snyggt gjort! Den smalare plywooden som du använder tillsammans med den tjocka som jag gissar är 18 mm, hur tjock är den? Mycket och många bra tips, tack! Dessutom roligt hur man hör direkt efter en mening av engelskan att du är svensk :) Vi har vår speciella engelska dialekt vi svenskar, hehe...
Pretty much any dimension would be acceptable as long as you have an area to run a screw through. As for the spacing, it really depends on what you plan on putting on it. If you're doing a wall to store lawn and garden tools, you don't need 6" spacing since the tools are large and will take up enough room that many of the cleats would be unusable. If you started with something like 12", then you could always add a cleat in the middle and reduce the spacing, if you find that it would be needed.
Good question! The distance need to be as minimum the total height on the cleats on the back of the toolholders. If it is less then you will not be able to hang the toolholder. There is no maximum distance, you can even just have 1 single cleat on the wall if you so wish.
25-35mm depending on how deep they would be without coming out on the other side. The nails are only used instead for clamps, the glue is what hold everything together.
@@DesireToInspire1: WOW, hope it wasn’t too serious, but I was thinking in the early part of the video that your fingers were in the line of fire. They don’t always go where you intended!
great french cleat wall. but if i can give some advice. don't use gloves when working with the table saw. it's more dangerous on top of the already dangerous tablesaw.
I have seen more say this, do you mind explaining why it is dangerous? I'm nowhere near the blade and my gloves are very tight so there is no risk for them to fall of or catch the blade. I honestly want to know so I can avoid loosing fingers :)
@@DesireToInspire1 even with the lowest risk its very dangerous. when a tiny amount of fabric is catched, your whole hand/arm will get pulled into the blade very fast.
What grade of plywood are you using? Do you find it just as good, it not better, to store some items, like hack saw blades in your tool chest. I find it too finicky to grab small things like that off the holder and try not to drop them.
It was the lowest kind of garde i could find, we call it construction plywood, very bad finish and thing layers, but with some sanding it look ss good. So far i have found no flaws with it. Do no not regret a single tool holder so far, it have made my workflow way faster then before. I know exactly where i have all my items now, so happy about them.
I will answer in English so all can understand :) Thanks for the nice comment! ♥ The cleat width are about 6 cm and the CC distance between the cleats are about 17 cm. I plan do do a in depth guide where i explain everything about the french cleat walls, maybe it will be my next video.
A wide range of angles will do. If you're using narrow cleats, much more than 45 degrees will start compromising the amount of bearing surface. Much less than about 30 degrees and things might be a bit easier to knock off. You could even combine 45 degree wall cleats with 40 degree shelf cleats (though not the other way around) without destroying the universe completely.
Kommer från Kina: Jag köper dem via mitt företag men du kan hitta dem och liknande på Aliexpress. Sök på "2Pcs 90 Degree Right Angle Clamp Aluminum Alloy L-square Holder Ruler Clamping Squares Woodworking Tools" Så hittar du vad du söker. Hoppas du hittar något som passar.
Nice job. But: never ever use gloves around a rotating tool - that is asking for disaster. From your tool-sets I deduct you are doing a lot of woodwork - which causes dust. For my wall I used vertical strips behind the cleats to allow dust to simply fall through.
I Believe you are referring to the blocks i use when mounting the cleats to the wall. They are used so that i get the same distance between each row without having to measure it every single time.
@@DesireToInspire1 I adding ask a very clear question. You often clamp some black, blocky small carpenter squares to pieces of plywood your attaching together to make sure they’re perfect right angles. I saw you use them often in your flip top build as well and they look like the perfect size for this case.
I can't believe I saw you cutting wood with gloves on. This is a mortal sin in woodworking. You are destined to get your hand pulled into the saw blade. Please take them off.
Funny how you would mention this! In the next video I made I did learn this the hard way, it's not included in the video but after 4:08 in this video ua-cam.com/video/B9rq3WqwdC0/v-deo.html you can see how I suddenly have a small "dot" on my nail on the left thumb. The nail did bend in the wood and came out right into my thumb, about a cm deep, hurt like hell. The feeling was like when you hit your self with a hammer on the thumb but worse...
@@DesireToInspire1 i am no expert. Just a hobbyist who got his first ever nail gun...but they can injure out of the blue. Some woods can bend the nails and ebd up in not so desirable places 😅
Very nicely done. I appreciate the guidance on making my own French cleat hangers.
Thanks for the video!! Some great ideas in here as I'm about to make a cleat wall myself :). One small issue though as it scares the bejesus out of me watching it.... using gloves with a table saw... While it totally seems like the gloves would add more protection (even if they're "cut / knife resistant"), the issue is the teeth of the blade will grab the fabric and pull it into the spinning blade. Basically instead of protecting the hands from nicks, it's presenting a way for the blade to grab and pull your hand into it and keep it there (meaning you won't be able to pull your hand away as the cloth continues to get wrapped into the blade). The only way to save yourself at this point is to shut the saw off, and your hand(s) will have suffered tremendous damage.
Hence please please pretty please, don't use gloves!! :) Also a pushstick is highly recommended for cuts with a width less than the width of your hand.
Keep making great content!!!!
I was cringing BIGTIME watching that also!! That's definitely Rule #1 & is a MAJOR no-no around basically almost any kind of spinning/rotating tool or machine. It's just an accident waiting to happen in my opinion, that's for sure. Maybe on the next one, consider leaving out 95% of the gluing & the finger-spreading footage, as I'm pretty sure that we're all aware of how it's done...other than that, nice build!
Holding your finger or thumb near the expected path of your pin or nail isn't wise, either!
Looks very good, a great video.
I have my cleats on the wall ready but still have other things to finish off such as a workbench.
Cannot help indulging myself in ideas and inspiration from other people though.
Thanks for sharing
👍👏👍👏
When the next to last was being placed, but fell on through, that is when I realized things like that really do happen to other people - not just me. I'm still laughing about it,. AS great video as well as the others. Keep up the quality build, it looks great.
I like how you used the same plywood throughout, and all the tool holders are similar in size… looks very professional 🙂
Thank you so much!
Using gloves on a table saw is a bad idea. We had an accident I a company I have worked. A guy almost cuts his hand in half because he was using gloves on a table saw
I was here to make a similar comment. Seems like an invitation for something very bad to happen
Ive been doing it 20 years never had a problem you just have to pay attention..Im never going to stop wearing work gloves and Im certainly not taking em off for every cut
Another problem is reaching over the blade on the completed cut. A kickback will pull his gloved hand right into the blade.
NEVER use gloves while working with rotating machinery. It's better to get cut or get wacked than getting pulled towards the machine by the gloves. Learnt that the hardway using a drill press, almost broke a couple of fingers.
@@matthewsynoradzki4656 i ve been doing it for a long time does not make it safe in my opinion. But hey what do i know..if you feel comfortabel doing it like that great. But many People watch these UA-cam video's so it would be nice to see People doing it safe so others will too..
Hi, I used your video as a guide in my garage for "some" of my tools. I also used laser printed tool holders by Leverage Designs that fit into the battery slot of my tools (Ryobi) and laser printed clips that hold my batteries too. Screw the holders into a board and they hold the tool, hanging via the battery slot. I still needed cleat holders for my circular saws and misc tools though and it was a lot less complicated than creating the little pieces to hold a tool in place. Thanks for the ideas.
If you hold shift on your keyboard and hit the arrow right key the video goes to 1.25 speed. If you do it again it goes to 1.5. Two more times and you're at double speed. That's where I ended up.
Perhaps the best of all similar walls and tool storage. Saw this on my tv and had to come to the computer to subscribe and commment
Just a reminder... Nails can turn and bite a finger occasionally... Never put any part of yourself in that zone of nail length. This is true of every size right up to 16d for framing houses.
Yes, most definitely...they can, will & DO make that u-turn that will turn around to get you...almost always when you aren't paying attention to if it could happen, that's when it does!! And ESPECIALLY 16d nails!!
Excellent work! I love how thought out everything is.
Functional utility! Nicely done! Thank you for sharing!
Nice idea for capturing the electrical cords.
Thank you! Most tools today are with a battery and even I convert to battery tools as much as possible but i still had some with cord and this was the best solution i could come up with. I think a pipe would have been even better, less friction.
Several of those will work good for me
Very helpful thank you, I like the support that also has a box to stuff the cord in, nice touch
Looks great. Well done. For gluing "A Glimpse inside" channel showed how to use PVA and CA glue (with accelerator) together when gluing and it saves the need for clamping when fixing screws or brads. I use it all the time and recommend you have a look if you get time. Awesome technique. Thanks for the top quality vid!
Thanks for the advice! Yes i have seen it being used many times and i will probably end up doing the same. But for now normal glue will have to do, i simply just don't have all the bells and whistles yet :)
Incredible organizational skills.
Excellent Job man! Very well thought out - I commend you!
Tx for the video
your tool wall is worth more then my house. very nice work.
Glad you like it. I will keep building on it now this winter ❄️
Muito bom seu trabalho, saudações aqui do Brasil🇧🇷!!!
awesome! danke
Just by looking at the pipes on the walls and the heaters you have, i could say you are from Sweden. :-)))
Does everyone have a dewalt table saw? The majority must as they are on every channel! Nice job on the different types!
Spännande att följa hur din hållare växer fram. Ser fram emot fler härliga videos!
/ Viktor
Tack så mycket för att du tittar!
Really cool man , good job you did
Great ideas!!!!!
I just finished the cleats and ready for holders.
By the way.... i winced when i saw you using the nail gun. I am VERY careful and last weekend i shot a nail into my ring finger. OUCH
great ideas for holders
Cheers
... I did edit out that part... But it happened to me too, I learned my lesson.
SO NEAT - inspirtational!
Awesome man. Very nice video. Greetings from Hamburg, Germany
Great video. Like how detail. You are....especially the holder for cords. Would love to see how you would mount heavy duty rivet gun on french cleat
I recently bought one of those adapters you put on a drill, maybe not what you are looking for but this fall/winter i will for sure make more holders, i still have a lot to hang up!
very clean, beautiful! Great job.
Thank you so much! I'm glad you liked it!
ASMR Heaven... subbed and salivating for more! Thank you.
There is only 1 more outdoor video I will post and after that, I'm back inside and i will start with some more innovative french cleats designs. This winter will be some intense projects!
Top top
You should have more subscribers. Nice work.
Then subscribe 😆
Really like your channel but i also agree, i wouldnt recommended doing what you done here 19:00 but its up to you if you feel confident enough to pull wood from a moving saw.
'all my most important tools at arm's length' - you must have awfully long arms- that wall looks around 3 metres. I envy you having so much spare space- my small workshop is crammed. Such widely spaced tools and gaps are not possible for me- indeed I have to use the same space more than once. For example, I have a piece of wall that, when I am using my MFT for woodwork has the nearby wall cupboard double folded into the space, holding all my dogs, clamps, etc. When I am using my milling machine a board holding all my milling tools slides from the enclosure behind the mill into the space. If doing electronics, a unit swings down from the ceiling holding my scope, power supply, components, etc. Never needed together, so no conflict, and space used three times. And all actually within arms reach...
For a guy that is so dexterous and precise with his wood working, your quite clumsy at putting your tool bits on the shelf! 😊 Just joking, I really love your videos; excellent demonstration of builds, ingenious ideas, beautifully shot and great humour. You have given my inspiration for my new workshop. Much appreciated.👍
Wow, thank you so much, you just made my day so much better 🤗👍
Great video, and excellent craftsmanship. Thank you for creating and sharing this. Q - what kind of nailer is that that you're using? I see the brand name "Rapid". Is that a 23-ga pin nailer?
ah ha! this is what they do when its minus fifty outside. got it. greetings from palm desert. lol
Wouldn't it be better to stick with the 40 degrees than to have them not "twin" / mirror the wall cleat and the hanging cleat sides?
40 degrees instead of 45? Hmm, I do that all the time. Usually it is 35 degrees when I ready wanted 30.
great video, I'm just starting my French cleat journey. I love the square you use for constructing with, what do you call it?? Where can I get one??
Thanks! You can find similar on Amazon, temu, Aliexpress and many other places.
No plans on Etsy for this.
No sorry, the holders are so custom made for my tools that plans would be almost pointless to make for others.
Show!
Hi, i notice you clue and clamps thing together, don't you use screw ? Or some you do and not?
I love the background music. Who is the artist please?
Snyggt gjort! Den smalare plywooden som du använder tillsammans med den tjocka som jag gissar är 18 mm, hur tjock är den? Mycket och många bra tips, tack! Dessutom roligt hur man hör direkt efter en mening av engelskan att du är svensk :) Vi har vår speciella engelska dialekt vi svenskar, hehe...
Dude! Jag är mållös. Detta löser alla problem som jag har funderat på.
Jag är helt förälskad i systemet! Har gjort fler hållare än jag har filmer på :D
Very nicely done! Could I ask the dimensions of the cleats and what size spacing between cleats you used? Tack!
Pretty much any dimension would be acceptable as long as you have an area to run a screw through.
As for the spacing, it really depends on what you plan on putting on it. If you're doing a wall to store lawn and garden tools, you don't need 6" spacing since the tools are large and will take up enough room that many of the cleats would be unusable.
If you started with something like 12", then you could always add a cleat in the middle and reduce the spacing, if you find that it would be needed.
On the wall rails - does it mater the space between them or just you then build anything that's going to hang from them to that same gap?
Good question! The distance need to be as minimum the total height on the cleats on the back of the toolholders. If it is less then you will not be able to hang the toolholder. There is no maximum distance, you can even just have 1 single cleat on the wall if you so wish.
New subscriber name Manuel Torres (Mexico)
Love this. Is that sheet vinyl or plank flooring on your bench top?
I'm curious to know why you didn't brad nail the cleats to the holders and relied on the glue to hold the weight of the tools?
Glue is insanely strong 💪 and is more than enough.
how long were your brad nails? thanks!
25-35mm depending on how deep they would be without coming out on the other side. The nails are only used instead for clamps, the glue is what hold everything together.
What nailer are you using?
Great tool holders and really nice construction techniques - though every time you used that nail gun with your fingers so close, I cringed.
About that.. I had to cut out a section where i did nail my self in the thumb :D Lesson learned.
@@DesireToInspire1: WOW, hope it wasn’t too serious, but I was thinking in the early part of the video that your fingers were in the line of fire. They don’t always go where you intended!
How many inches separate the horizontal wall cleats from each other?
About 7" from center to center.
great french cleat wall.
but if i can give some advice. don't use gloves when working with the table saw. it's more dangerous on top of the already dangerous tablesaw.
I have seen more say this, do you mind explaining why it is dangerous? I'm nowhere near the blade and my gloves are very tight so there is no risk for them to fall of or catch the blade. I honestly want to know so I can avoid loosing fingers :)
@@DesireToInspire1 even with the lowest risk its very dangerous. when a tiny amount of fabric is catched, your whole hand/arm will get pulled into the blade very fast.
I feared for your thumbs with that nail gun.
Might have just been the angle but your fingers seemed awfully close to where the brad nails were going
I now keep my fingers far away, i learned the hard way :)
What grade of plywood are you using? Do you find it just as good, it not better, to store some items, like hack saw blades in your tool chest. I find it too finicky to grab small things like that off the holder and try not to drop them.
It was the lowest kind of garde i could find, we call it construction plywood, very bad finish and thing layers, but with some sanding it look ss good. So far i have found no flaws with it. Do no not regret a single tool holder so far, it have made my workflow way faster then before. I know exactly where i have all my items now, so happy about them.
@@DesireToInspire1 vilken tjocklek använder du för "ramverket"/kilarna? What thickness are you using for the cleats?
New to woodworking here. Isn't it not advisable to wear gloves while operating some of these power tools?
Not at all as long as the gloves sit tight and have no loose threads that the tools can grip on to.
Hallo what can we for dremel and accessories thank you
I have to do that for a future build :) Good 💡 idea.
Grym video 👍 tänkte fråga bredden på cleatsen på väggen är? Plus avståndet mellan dem?
I will answer in English so all can understand :)
Thanks for the nice comment! ♥ The cleat width are about 6 cm and the CC distance between the cleats are about 17 cm. I plan do do a in depth guide where i explain everything about the french cleat walls, maybe it will be my next video.
Hvor har du fått de L vinklene (90 grader) som du bruker med klemmene? De i sølv og svart, klarer ikke lese navn/logo
AliExpress 🛍️
40 degrees would do the same job. Stuff won't fall off the walls if you don't use 45 degree cleats.
A wide range of angles will do. If you're using narrow cleats, much more than 45 degrees will start compromising the amount of bearing surface. Much less than about 30 degrees and things might be a bit easier to knock off. You could even combine 45 degree wall cleats with 40 degree shelf cleats (though not the other way around) without destroying the universe completely.
Hur höga är cleatsen och hur mycket har du mellan dem?
6cm och ungefär 17cc. Jag är nöjd med både radavstånd och höjden på dem.
Hej. Funderar på vinklarna som du använder för att limma och klämma ihop material. Var kan man få tag på såna?
Kommer från Kina: Jag köper dem via mitt företag men du kan hitta dem och liknande på Aliexpress. Sök på "2Pcs 90 Degree Right Angle Clamp Aluminum Alloy L-square Holder Ruler Clamping Squares Woodworking Tools" Så hittar du vad du söker. Hoppas du hittar något som passar.
👍👍👍😊
Can u tell me the plywood name
I honestly do not know the English name for it. Directly translated from Swedish is "construction plywood". Not very high quality.
Nice job. But: never ever use gloves around a rotating tool - that is asking for disaster. From your tool-sets I deduct you are doing a lot of woodwork - which causes dust. For my wall I used vertical strips behind the cleats to allow dust to simply fall through.
What are the squares you're using?
I Believe you are referring to the blocks i use when mounting the cleats to the wall. They are used so that i get the same distance between each row without having to measure it every single time.
@@DesireToInspire1 I adding ask a very clear question. You often clamp some black, blocky small carpenter squares to pieces of plywood your attaching together to make sure they’re perfect right angles. I saw you use them often in your flip top build as well and they look like the perfect size for this case.
@@winknotes The black L piece at 10:34?
If you can share a link to these as I want to buy some!
good stuff but the music.... dude!
I can't believe I saw you cutting wood with gloves on. This is a mortal sin in woodworking. You are destined to get your hand pulled into the saw blade. Please take them off.
how about using a brush instead of your fingers for that glue, its so irritating
don´t put your fingers in the way of the nail path!
Funny how you would mention this! In the next video I made I did learn this the hard way, it's not included in the video but after 4:08 in this video ua-cam.com/video/B9rq3WqwdC0/v-deo.html you can see how I suddenly have a small "dot" on my nail on the left thumb. The nail did bend in the wood and came out right into my thumb, about a cm deep, hurt like hell. The feeling was like when you hit your self with a hammer on the thumb but worse...
@@DesireToInspire1 i am no expert. Just a hobbyist who got his first ever nail gun...but they can injure out of the blue. Some woods can bend the nails and ebd up in not so desirable places 😅
You should not have gloves on while using any power tool!
Bloody music drowns out voice
Don't ruin the good content with stupid music. We came for the content.
Then mute it :) ❤️
@@DesireToInspire1 Then I miss what you say.