That is a very nice truck. My dad had a 61 with the big eyebrows in the hood. Really enjoyed helping him work on it. I noticed the green light on the dash that goes off when the engine is cold. Hadn't even thought of much less seen one in decades. Really do enjoy these videos. You do damn good work.
Great work, you two made it look very easy. Fawn is the color, some say Fawn Brown, other's say Fawn Silver/Brown? All our 63's C10's are old and each one fades into its own cool looking patina color. Thank You Brother Gibs for another fun video. May God continue to bless you Brother Gibs, Big Daddy and the rest of the family each day. Keep On Trucking Brother Gibs👍...
You know Steve,we have one thing in common,we both like trucks from the 1960’s.I have to admit though you go beyond what I would take on with that windshield,I tried it once when I was a kid & broke it, so I know it’s not something I’d tackle on my own.but you’re truck is looking sharp brother. You can’t find those trucks here in New Mexico,without paying through the nose for them.glad you were able to find it.I enjoy your videos,thanks for showing,retired mechanic in Las Cruces New Mexico.👍🏼💯
Man, you nailed the stance on that truck, just a tad higher in the back. I’ve seen so many nice rigs that are lower in the rear end, who could live with that ?
This ones coming along really well. Great ride, and can you imagine what it will be like after you dr. up that clutch, sounds like it might be time for some synchro's in that ol crash box.
Looking good. Love the content. Those rope in windows brought me back to my late teens, early twenties in the very early eighties. I installed many of those while working for a local glass shop. Fun stuff.
Great work my dad had a 63 step side it had the small back window in it was a 327 with a 4 speed on the floor it was the first truck I drove as a kid we would ride it in the cow pasture had a blast in that old truck
Mr Gibson another great job. Cant wait for mother nature to warm things up again in our area and get back at our 66 Impala. Started a channel of our own due to your influence and great videos. Keep on keepin on.
Those windshields are fun 😅 love your videos! we had to put one in my Belvedere to transport and not rip up the headliner…then yesterday had to take it out to start stripping off the paint.
Mr. Gibson, Love your channel and your work! I purchased SWB 63 because of your videos. I am still working on it. My first truck was a LWB 283, 3 on the tree, in a '65 back in '85. Are you still doing the construction? Any way to contact you? Big thanks from the Lou! St. Louis MO s
I enjoy watching work on your C10s, I have a 65 and I can not find good wiper blade arms that hold the blades to the wind shield and ideas where I can get ones
I really enjoyed your video and for the info on the paint color on the insides.of your 63. Looks like the same color that I need for my 66. Thanks for all your help and I mention you on my videos too! Thanks buddy!
I hear y'all, I'm putting the Stainless Steel Trim in my Windshield Gasket, a lot more work bcuz of the SS Trim but I really like the look of Brother Gibs Red C10 with the SS Trim in the Windshield, Way Cool Looking 😎... Keep On Trucking Brother👍...
Enjoy watching you work on the old Chevys don’t ever stop please
Dang, it's been 40 years since I drove three on the tree, good memories.
Having an experienced helping hand makes all the difference. Enjoy your videos a lot!
Single handedly bringing them back, really nice survivor not overdone
Gotta say, I’ve never been a fan of the step side but this truck has converted me! Lol
Man I was nervous when you were hitting the glass 😮 lol Thanks for another , Brother !
It would probably have been better if ya wear some gloves. So when you are slapping it like that your less likely to crack it.
That's how it's done bear handed. All the glass my old cars have been done in the same manner.
Congrats, you have another one alive. Good looking truck. Great tip on the wiper blade to keep the stainless arms. Thanks for sharing.
Very nice 63. You do the best videos!
That is a very nice truck. My dad had a 61 with the big eyebrows in the hood. Really enjoyed helping him work on it. I noticed the green light on the dash that goes off when the engine is cold. Hadn't even thought of much less seen one in decades.
Really do enjoy these videos. You do damn good work.
Great work, you two made it look very easy. Fawn is the color, some say Fawn Brown, other's say Fawn Silver/Brown? All our 63's C10's are old and each one fades into its own cool looking patina color. Thank You Brother Gibs for another fun video. May God continue to bless you Brother Gibs, Big Daddy and the rest of the family each day.
Keep On Trucking Brother Gibs👍...
Another good video Steve. See you on the next one.
The best love your work mate Curtis from Australia.
Great job on that truck You picked the right wheels for that truck.🇺🇸
We need a new video! I know they’re a lot of work and slow down your progress but man we learn a lot from you. You do some awesome builds. Thank you !
Thanks man Been busy at work lately I’ll be back on the black 63 soon installing the wood bed
@@Gibson63. hell yes!
You know Steve,we have one thing in common,we both like trucks from the 1960’s.I have to admit though you go beyond what I would take on with that windshield,I tried it once when I was a kid & broke it, so I know it’s not something I’d tackle on my own.but you’re truck is looking sharp brother. You can’t find those trucks here in New Mexico,without paying through the nose for them.glad you were able to find it.I enjoy your videos,thanks for showing,retired mechanic in Las Cruces New Mexico.👍🏼💯
Thank for watching I’ll be doing the bed wood soon been having fun with this old truck going to a few car shows and cruise in
That's a beautiful black c10. It's great to see you put another one back on the road.
OL'blacky looking real good 👍
Best channel ever.
Man I'd love to own that truck - if decide to move it please keep me in mind
Would seriously think on getting out of the city, as far from any as you can. Nice truck, will be handy.
The old ‘63 has a great “stance”. Good job Bro’. FYI my nephew could be your twin brother.
Nice job man! Attention to detail !!
Hey Steve , been following on all the videos you really made a nice little truck out of this one, kinda like a big window tri 5👍👍
Good looking truck!
Yes Sir!!!
On My 66 Nova,That Color Was Called Sandalwood Tan
That column shift sure looks tight. The transmission sounds exactly like my ole 66 did.
Just found out no brass bushings on any of the linkages, and the pressure plate collapsed about half way around
Man, you nailed the stance on that truck, just a tad higher in the back. I’ve seen so many nice rigs that are lower in the rear end, who could live with that ?
Here we go.👍
Looking good!
Man, I sure wish I was your neighbor.
i would have loved to have this video exactly one month ago, as it is when i put mine in. took me, my boy and wife 3 hours to get it all in
Another sweet truck!
Love this channel bud ! Much love pal !
This ones coming along really well. Great ride, and can you imagine what it will be like after you dr. up that clutch, sounds like it might be time for some synchro's in that ol crash box.
Handsome truck. 😎
Looks great. Nice truck.
Looks great. The black on blk
😎👍
It's very much possible for you to remove your windshield for dash control. I learned 👍
And reinstall🤷
Good looking trucks. My first ride was a 64.
😂 Man I wasn't that Brave on my sons 55 3100 p.up didn't want a 500.00 goof ! Done all other glass, called the pro for that ONE ! ✌
She purrs like a kitten and love the 3 on the tree...Somebody's gettin' pregnant!
Looking good. Love the content. Those rope in windows brought me back to my late teens, early twenties in the very early eighties. I installed many of those while working for a local glass shop. Fun stuff.
Great work my dad had a 63 step side it had the small back window in it was a 327 with a 4 speed on the floor it was the first truck I drove as a kid we would ride it in the cow pasture had a blast in that old truck
Mr Gibson another great job. Cant wait for mother nature to warm things up again in our area and get back at our 66 Impala. Started a channel of our own due to your influence and great videos. Keep on keepin on.
Those windshields are fun 😅 love your videos! we had to put one in my Belvedere to transport and not rip up the headliner…then yesterday had to take it out to start stripping off the paint.
Ha ha!! I'll just bet ya will come back one day and finish that there dash! 😂😎
I order new loose Silicone wiper blades, they last way longer than the rubber ones
That bad boy is a gear jamming
Looks good Brother!!!
I have a '63 Stepside myself, thank you for all the videos you post!
Heck yeah man, lovin this black truck. Great to see you back at it.
Thanks man just subscribed to your channel 👍
@@Gibson63. My pleasure, Thank you for the sub. I have been watching your channel ever since you restored the red truck, love your skills.
Dang! I would love to just drive that!! Thank you for you videos!
Another great video I’m starting my 62 c20 and your videos are very informative thanks for the channel you do nice work and explain what your doing 👍
Nice truck!
Outstanding! Looking really good!
Add a little dish soap for lubrication helps it slide in
Mr. Gibson, Love your channel and your work!
I purchased SWB 63 because of your videos. I am still working on it.
My first truck was a LWB 283, 3 on the tree, in a '65 back in '85.
Are you still doing the construction? Any way to contact you?
Big thanks from the Lou! St. Louis MO
s
I enjoy watching work on your C10s, I have a 65 and I can not find good wiper blade arms that hold the blades to the wind shield and ideas where I can get ones
Great videos!! Keep them coming!
Nice work
I really enjoyed your video and for the info on the paint color on the insides.of your 63. Looks like the same color that I need for my 66. Thanks for all your help and I mention you on my videos too! Thanks buddy!
Thanks man I’ve been keep up with your channel also take care
I wish you was here in Oklahoma to help me with my 63 chevy c10 🎉🎉🎉🎉🎉🎉
Nice. I’m not looking forward to putting the windshield back in my 63 c10.
I hear y'all, I'm putting the Stainless Steel Trim in my Windshield Gasket, a lot more work bcuz of the SS Trim but I really like the look of Brother Gibs Red C10 with the SS Trim in the Windshield, Way Cool Looking 😎...
Keep On Trucking Brother👍...
Just take your time and have a helper on the outside like Gibson had to help slap the rubber onto the pinch weld.
Will make a nice driver
Would like to see some black steeling and caps on it though! :)
truck is looking nice
The interior color is GM Light Driftwood.
like watching the vids, thankyou, how did you mount your steering pump??
Man, 9:26 !she’s lookin good daddy’o!
i have 16 inch wheels on my c10, doese the 15 inch wheels fit ok ?
Yes 15’’ wheels fit great
I'm looking for a 1961 Apache any idea where I can get one