You can actually find those slot nuts at your local hardware store. They are used for electrical boxes. Sometime they will have small springs attached to them that you can just snip off. Extremely inexpensive compared to the rhino rack ones
Hillman 3/8 bolts, washer and lock nuts also sold at Lowes to match these. Basically you can buy them all in bulk at Lowes. I have 4 Talente ice cream jars full of each.
Imagine just rolling on the highway at night, and some random dude flashes his lights at you for no reason... Oh boy unleash hell on him with all these lights 😂
What a thoughtless comment. First of all the lights are work lights on the SIDES of the vehicle. Second, why the hell would you want to try to blind an oncoming car unless you are trying to kill them, yourself, your family or some other poor soul. Grow up 12 years old.
Just a heads up, there's no waterproofing in the cables coming out of the lights, so they can just fill up with water, the tape you put around it might be enough, but I put some silicon around the end of mine.
On the driver side next to the brake booster there’s a small plastic grommet you can use to pass wires through just give it half a turn and it will pop off
Enjoyed your video again (second time through). Pro Tip: If you find that you installed it on the wall side and can't present it properly - just back your rig into he garage. Problem solved 😀
Love the build, I have the same rack and was thinking about similar positioning for working lights! Since I was thinking about using it more when loading and unloading the car, how is the light closer to the jeep? Enough? Thanx and great job 👏
You can get those battery disconnect switches off of amazon that have little remotes to turn them on and off. Less hood opening! The one I got was rated for 120V and 1,000A and was a grand total of 25$. Perfectly overkill.
Did you know this new model of the Pioneer Rhino Rack has internal wiring channels? I don’t have any of the wires exposed on the outside except where they come out to the lights which I have 10. I ran them in series on 4 separate circuits.
Saw you other video with Injen cool air intake. But in this video, you have a stock intake. Is this different wrangler? Or why no longer Injen intake? I am thinking about adding the Injen intake, that’s why I am wondering. Thank you.
Hey brother, I have that same rhino rack and those little lights are a great fit. Can you share the model you used as I can’t seem to find them on Vivid’s website
The idea is great the brand offer decent product usually but I feel like this one could be better using rgb leds not 1red 1green 1 blue light looking at it is awful. Thanks for the good work !
I need to get a second vehicle so I can take the time to do things properly. Probably why I've had a wing for 10+ months sitting in the shed instead of on my car
You can actually find those slot nuts at your local hardware store. They are used for electrical boxes. Sometime they will have small springs attached to them that you can just snip off. Extremely inexpensive compared to the rhino rack ones
Hillman 3/8 bolts, washer and lock nuts also sold at Lowes to match these. Basically you can buy them all in bulk at Lowes. I have 4 Talente ice cream jars full of each.
Big fan of the voiceovers on the fab work B-roll, love to see it
Imagine just rolling on the highway at night, and some random dude flashes his lights at you for no reason... Oh boy unleash hell on him with all these lights 😂
Then you go straight to jayl.
What a thoughtless comment. First of all the lights are work lights on the SIDES of the vehicle. Second, why the hell would you want to try to blind an oncoming car unless you are trying to kill them, yourself, your family or some other poor soul. Grow up 12 years old.
the jeep is becoming an absolute unit
Love this jeep! Dream to have something similar one day, these videos will be used 😁
AuxBeam makes the exact gang switch panel and fuse box. Installed it and love it
Thanks for the upload 💪🏻 great vid once again!!
Just a heads up, there's no waterproofing in the cables coming out of the lights, so they can just fill up with water, the tape you put around it might be enough, but I put some silicon around the end of mine.
I love how the Jeep build is turning out!
On the driver side next to the brake booster there’s a small plastic grommet you can use to pass wires through just give it half a turn and it will pop off
this literary brightened my day 🤣
That is a cool Location to put the swithches! I 3D Printed a nice bracket for my panel as it is for driving lights, right under the headlight switch.
Anyone trying to find these lights are outta luck:
Just called Vivid Lumen customer service and they said they don’t carry anymore.
Super clean install. Great job!
You could have just wired the lights in parallel and just run down one wire instead of 9 🤷🏻♂️
Looks absolutely amazing!!
Just ordered some more merch, thank you man 😎
Enjoyed your video again (second time through). Pro Tip: If you find that you installed it on the wall side and can't present it properly - just back your rig into he garage. Problem solved 😀
Love the build, I have the same rack and was thinking about similar positioning for working lights! Since I was thinking about using it more when loading and unloading the car, how is the light closer to the jeep? Enough? Thanx and great job 👏
Red light is even less likely to attract bugs than yellow.
I always use a super bright red headlamp attached directly to my ly hat while fishing.
You can get those battery disconnect switches off of amazon that have little remotes to turn them on and off. Less hood opening! The one I got was rated for 120V and 1,000A and was a grand total of 25$. Perfectly overkill.
Love this !!! Doing the same thing right now! Did you create any seal on the inside of the jeep where the hole comes through?
Dope! I wanna do this to my jeep!
Did you know this new model of the Pioneer Rhino Rack has internal wiring channels?
I don’t have any of the wires exposed on the outside except where they come out to the lights which I have 10. I ran them in series on 4 separate circuits.
once again requesting a late nights loud cars banner!
Green matches to stock dash light colors in the JK.
Saw you other video with Injen cool air intake. But in this video, you have a stock intake. Is this different wrangler? Or why no longer Injen intake? I am thinking about adding the Injen intake, that’s why I am wondering. Thank you.
Hello, what is the top cross bats on roof rack? Need something like that for my ikamper rtt, mounting is nightmare
Hey brother, I have that same rhino rack and those little lights are a great fit. Can you share the model you used as I can’t seem to find them on Vivid’s website
saw you in Orillia yesterday! we've met once before in the Gravenhurst Subway so i didnt bother you, but i know that Jeep when i see it xD
Why don't you make an rc version of your jeep. Like a 1/10 scale of you car it will look awesome
Do you have a GMRS radio? I hear the Auxbeam controller has issues when you transmit of GMRS.
Robbie camping up at black lake. If you know you know
If you use the center console you may get accidental clicks if there are items in it.
The idea is great the brand offer decent product usually but I feel like this one could be better using rgb leds not 1red 1green 1 blue light looking at it is awful. Thanks for the good work !
What are the models of these lights. Can’t find them on the site
There is no light like this on their website?
they must be currently sold out.. sometimes when they sell out they remove the item. send them an email!
The JK is much more friendly to wire to the engine bay.
Let’s go!!
Why can I not find this light anywhere. I don’t get it. Could you please send me the model please
That switch panel is not on there. They have a couple normal switches..
I need to get a second vehicle so I can take the time to do things properly. Probably why I've had a wing for 10+ months sitting in the shed instead of on my car
Wow❤😊😊
which alloy is that
The next owner of your Jeep is in for some fun?
Where in Ontario are you
I'm just east of Toronto
Hi Robbie
Robbie..where's brat??
When are you gunna build a car for Courtney? Or is she not really into cars?
First
Wheres ur spare tho?
😍😍🔥🔥💯💯💯
25:41 HANSACOLOR100?
you can set up yust with the headlight bruh 😂 at this point you are scared of darknes dont forget underglow for the bogieman
una gorrita de esa del pescado tapa la mirada poco saben de mi🫡