Thanks for showing this, I just strung 2 of these and the first one I ended like you did. For the 2nd one I followed the factory instructions for the last knot and the knot becomes so close to the main string that you can’t double knot it without it moving the main string a little bit. Very frustrating they recommend this but thanks for the video!
@@HerbBaird Yeah it was not a very good selling racquet although I have been told sales have gone up a lot recently with the success of Alcaraz and Holgar Rune.
If it is exactly 40 feet and you cut it in half, it will work. You will have to use a bridge to pull the outside mains, and tying the knot takes some work.
I have just uploaded a video showing a one piece on an 18x19. The process is the same. I describe the only difference in the video. On an 18x20, your top cross and bottom cross will have an opposite weave. If your top cross goes over a main, then the bottom cross will go under the same main.
Thanks for showing this, I just strung 2 of these and the first one I ended like you did. For the 2nd one I followed the factory instructions for the last knot and the knot becomes so close to the main string that you can’t double knot it without it moving the main string a little bit. Very frustrating they recommend this but thanks for the video!
Wow you are so fast weaving the string on the cross! Anyway, this is the same way to string Speed Pro 2022?
It should be
Any chane you could do a pure aero VS? Idk if it's a very popular racquet though.
If I ever have one come in. I know a couple of the college guys use Pure Drive VS, but have not seen a Pure Aero VS yet
@@HerbBaird Yeah it was not a very good selling racquet although I have been told sales have gone up a lot recently with the success of Alcaraz and Holgar Rune.
Can 1 pack of 40feet work for 2x mains? A multifilament nylon
If it is exactly 40 feet and you cut it in half, it will work. You will have to use a bridge to pull the outside mains, and tying the knot takes some work.
Hi. Is possible to string a racket in one pice with patern 18x20? And how?
Thank you
If I get one in I can do it.
@@HerbBaird can you explain me please hiw to do it. What to skip and how to come back.
Thank you
I have just uploaded a video showing a one piece on an 18x19. The process is the same. I describe the only difference in the video. On an 18x20, your top cross and bottom cross will have an opposite weave. If your top cross goes over a main, then the bottom cross will go under the same main.
How you get 20 cross .?where u start with cross ?8?
Not sure of the question. I get 20 crosses because the racquet has 20 crosses. Make sure you have the 18x20 and not the 16x 19 model.
Mr Herb you forgot the racquet placement on the machine😅 the Head is in the Throat place
Those are just rubber caps. The racquet can be mounted either way. There is no difference in the turntable from one side to the other.
Good to know so its just reference , thanks mr herb
Halo , why first time cannot tie for first cross ?
You can. I just do not like to pull tension directly against the grommet
@@HerbBaird u mean two method not different ?
Correct
I can't get the main through the 9th grommet. What am I doing wrong?!
I have no idea. It should just slide right through.