I just want to say thank you for making these videos. I love the car scene and I love working with my hands and fixing shit but when it comes to hanging out with fellow enthusiasts I just cannot do it. I have very bad anxiety around other people and unfortunately it makes it impossible to have friends. But with your videos I can almost live through you and the camera and see what its like and it really brings happiness to me. thanks again
More Skids great video as always man gotta say im so happy to see all the growth and progression you and dj are making on the channel and with the cars
Clunking will probably be the upper control arm balljoints hitting the inner arch. Happens on low xe10s. I had my hub uprights (that go up to the upper control arms) cut down 30mm to stop the banging and bring the UCAs down to a more natural angle, which also helps prevent bump steer
I used to run 17x9 + 17 and it was probably my favorite set up. A slight pull all around was perfect fitment. I'd consider dropping down to 40 profile as well, allowed me to go lower and rub less.
thread in the handle the roller and it will fit ! And some of them have more then one setting where the pivot is. That way you dont have to raise the car.
Look at the fender roller, there's two holes under the red knob on the side with a pin that's held in place with a clip. If you take the clip out and move the pin to the other notch it will give you the angle you need to mount it lol
Hey guy, so I just scored a is300 and I was wondering if you guys got the scoop on a intercooler kit for a 1jz-get vvti? Much appreciate love the videos 🙌🙌
i have the same is300 i bought it a month ago it has over 200k miles on it but runs great although if i was to burnout, my right back wheel spins only so what does that mean?? does it jus needs fluid change or sumn... i really hate that it does that, how can i fix it and hopefully not have to spend a lot of money
hey nice vid the is300 is lookin dope. dj it would be super dope to see u change the badges to toyota altezza badges and grill. for that moist jdm look ;)
When I set the height of my coilovers months ago, I left one just a little low and the car leans like an mf to one side. This video motivated me to adjust it to normal. Thank b0ss
I have pretty much the exact same fitment on my IS. 17x9 with 25 offset and 215/45 tires lol. Took me about a week to curb the front and a month for the rear...
buy a pbm fender roller lol its meant for lowered cars and worth the $$$. i have a regular fender roller and i had to roll my s13's fenders before i put the coilovers on. if youre handy with a welder then you can just shorten the arm that the actual roller sits on by cutting a section out and welding it back together lol thats if youre board if you got all da monies buy da pbm shizzzz
just stumbled across you guys, im pretty sure we live super close, "fires in BC" in all, im in everett area, car is nice man, mines coming along too! Silver, manual, gets all the bitches
I just want to say thank you for making these videos. I love the car scene and I love working with my hands and fixing shit but when it comes to hanging out with fellow enthusiasts I just cannot do it. I have very bad anxiety around other people and unfortunately it makes it impossible to have friends. But with your videos I can almost live through you and the camera and see what its like and it really brings happiness to me. thanks again
damn dude we are happy you feel that way about our channel! thank you man
More Skids great video as always man gotta say im so happy to see all the growth and progression you and dj are making on the channel and with the cars
More Skids also love them wheels dj specially in white
same except no enthusiasts rather than anxiety
same boat for me social anxiety is brutal on top of there being no one really into cars that arent dick heads here
Had to take a 12 minute bathroom break at work for this
"If anybody needs more than 3 tires its that fuckin lady right there" lmao I was fucking screaming
Dude those wheels are perfect DJ! Id go with the white on silver look as well its just so damn clean.
Clunking will probably be the upper control arm balljoints hitting the inner arch. Happens on low xe10s. I had my hub uprights (that go up to the upper control arms) cut down 30mm to stop the banging and bring the UCAs down to a more natural angle, which also helps prevent bump steer
I bought these wheels because of you guys! 17x9 +22 in Black Chrome but i went with 205/40 and it fits perfectly
I used to run 17x9 + 17 and it was probably my favorite set up. A slight pull all around was perfect fitment. I'd consider dropping down to 40 profile as well, allowed me to go lower and rub less.
DJ: the only dude who can pull off 4 different shades of black at once
The roller has the two lower pivot pins that you can remove and put in different holes to shorten the overall length
thread in the handle the roller and it will fit ! And some of them have more then one setting where the pivot is. That way you dont have to raise the car.
Best car channel on youtube, keep up the good work brothas!
That "redrum" tattoo you have is so nice
Bruuuuuuh! I've been chasing that clunk for like 2 years now!!! So stoked. I'm ordering new sway bar end links right now! Hahahaha
theres a decent amount of camber adjustment even with stock arms etc. im at abount -2.5 up front to get the tire inside the fender on 18x8.5 +35
wow beautiful wheels that make and model are the wheels and what size of tires you fit
Look at the fender roller, there's two holes under the red knob on the side with a pin that's held in place with a clip. If you take the clip out and move the pin to the other notch it will give you the angle you need to mount it lol
Always here bright and early for that more skids goodness. Luv u Bois ❤
Make sure you wash behind the arches well !
Lexus about as thicc as daddy DJ
The extra lip makes it look like dj got those bucket ass wheels with the bead not even to the lip 😂
looks so good, small spoiler along the top of the rear window next and a trunk lip spoiler too?
Once you roll the guards and get the fitment 💯 it's gonna look 🔥🔥🔥
Looks sicko. Camber it in a bit and they will fit snug
Those SteezyDon's look dope on that IS300!.
I was just in Oregon!!!! Went to Albany to buy a 240! I'm from Anaheim California btw; bout a 14 hour drive
I had the same problem today with the gaurd roller fitting "drift teks" to my a31 cefiro
Are there going to be any more meets this summer?
Yet another sick video from the more skids booiiis
Keep up the good work, DJ, little bit of camber up front could help with the tyre scrubbage
Hey guy, so I just scored a is300 and I was wondering if you guys got the scoop on a intercooler kit for a 1jz-get vvti? Much appreciate love the videos 🙌🙌
I bought the cat when Is it coming to my house and being shipped?
i have the same is300 i bought it a month ago it has over 200k miles on it but runs great although if i was to burnout, my right back wheel spins only so what does that mean?? does it jus needs fluid change or sumn... i really hate that it does that, how can i fix it and hopefully not have to spend a lot of money
Hey... you guys being the car guys you are. Are you guys going to BigNW in Portland next month. I know you dont drive Subarus but still...
Im big time happy for yung boy DJ for having a whippy he's happy about
With XE10's the knock in the front would be from the UCA's hitting.
They do it alot once you lower it abit.
Where are you guys from? Also great video
Do you have any plan on coming to LA or cali any time soon
To get the guard roller to fit on lowered cars you need to "trim" the roller
Grants E36 made me love those wheels.
That sidewall is huge!
watching thus at work staring at my IS in the parking lot fantasizing that I had the money to do more mods 😂
You have to adjust the swivel head and loosen the arm of the fender roller
Never seen 17's with tires stretched looks clean bruh
A and m tire co in clackamas oregon will do a stretch and some without questions
YOOO i live in kelowa mad respect for you man! love the channel been following since the beginning of the 240 still love it :-)
hey nice vid the is300 is lookin dope. dj it would be super dope to see u change the badges to toyota altezza badges and grill. for that moist jdm look ;)
Thst lady looked like motor momma from borderlands 2 😂
Keanu Hills holy fuck I've never agreed with anything more in my entire life!!!!
what lady?
she's gone
Did your car have coilovers when you lowered it?
yo jw, what type of rims are those. like the type of tire and rim where part of the rim sticks out? they look raw
Is that really a 215 tyre on a 9" wide wheel..?
Hey what wheels are those on the blue garbage can, are they reps? Asking for a friend
Damn DJ's car looks dope
Holy it's crazy seeing how much u guys have grown I've been sub sense 1k
why buy tires that dont fit the wheel?
What profile are those wheels? I want my IS to sit just like that
I've been waiting for what seems forever for this vlog lolol
that extra lip is kinda disturbing but hey, it's not that bad, congrats!
DJ Rockin that Spigen case. My man I see u
So what kind of car did geoff get?
I like the old More skids better, you know when they had 85k subs. Ahh those were the good old days.
Wait are you buying a 39k mile Mitsubishi Starion/ Chrylser Conquest? Just guessin'
Just my opinions..🤔🤔 the front and rear bumpers don't look right with the wheels. Maybe wide body kit???👀
BRO i got a clunk in the front left of my IS too.. i wonder if thats what it is. I'll have to check
yo Quentyn, how much boost that kitty running?
What's next for this beautiful beast
No Quentin Wheels?
When I set the height of my coilovers months ago, I left one just a little low and the car leans like an mf to one side. This video motivated me to adjust it to normal. Thank b0ss
1998 Lexus gs300
How much did dj get his is300 for?
"These fenders dude, They are begging for it" LOL
I give it a couple videos until he curbs the shit out of those lips. Lol
I have pretty much the exact same fitment on my IS. 17x9 with 25 offset and 215/45 tires lol.
Took me about a week to curb the front and a month for the rear...
Toastalicious just know your car's body and you will never curb
Toastalicious my is is running 18x10.5 in the rear, never curbed. Stay away from curbs at all costs that's the key
Would you sell the stock rims ?
So what's the tire size??
I'm guessing Geoffs potentially new car is going to be an FC or supra
What coilovers you got on boss
PLEASE PLEASE Paint match the grille on the ford!! It looks so clean!
Where did y’all get these tires mounted? Tryna find shops to stretch my shit north of Seattle is a bitch.5
I'm hopefully getting an IS300 too
I can't think of a comment but keep doing what you do love yall
Gud 2 si these 2 yung brackins staybpoed up a football in da strufo cup. ALL MY NIGGAS GANG. MUD GANG 2006
Helly Apex understandable, have a nice day
Helly Apex hell yeah
@backyardbuilt tf, this guy takin all your swag
Where the fuck is this from lmao
old ass meme, don't worry about it
Dj should get angle mods in the front
buy a pbm fender roller lol its meant for lowered cars and worth the $$$. i have a regular fender roller and i had to roll my s13's fenders before i put the coilovers on. if youre handy with a welder then you can just shorten the arm that the actual roller sits on by cutting a section out and welding it back together lol thats if youre board if you got all da monies buy da pbm shizzzz
edit: i saw yall rolled them towards the end carry on boiz
The Is300 looking yung as hayl doggo
I had the exact same problem as Dj with the sway bar
HOW MUCH FOR THE STOCKERS $?
Those wheels look hotboi af
send me the link to these wheels
When you turbo the is300 you should 100% put a 1jz head on the 2jz block and make a 1.5jz.
RIP Chester Bennington.
Hahaha I have that same roller you just had to bend it the right way till it fit in 🤣
i rlly enjoy this channel
we're glad!
The Mustang gt is so nice!!
Lincoln park reference... Too soon lol
But in the end, it doesn't even matter
Gard Pedersen mind blown!! Or in Chesty's case hung... Jk bad joke
Gard Pedersen OH RERRY? CALM YOUR TITTS NANCY!
Gard Pedersen so you're the most savage loneliness dad in the suburbs?
the fact that you spelt it lincoln and not linkin is fucked.
What are the wheel and tyre specs?
God I fucking love this channel
7:26 my car looks like a rice boi 9000 until it starts and you hear dem turbo noises
Been waiting for this video!😆
Geeoff buys a foxbody?
Slam dj's hair on cosmis wheels and daily it
Andrey Kotelnikov slam this comment on tarmacs and daily it
pls keep the cancerous haggard memes out
Andrey Kotelnikov wrong channel that aint haggard lel
*to the invisible boatmobile!*
just stumbled across you guys, im pretty sure we live super close, "fires in BC" in all, im in everett area, car is nice man, mines coming along too!
Silver, manual, gets all the bitches
you put the arch roller together wrong.. lol
Should get a bn style body kit for the lexus 😋