I watched sooo many reviews the last few days, because I m new to this monitor stuff and most of the time at the end of the review I m clueless. Your review was one of the few in which I felt I learned something and that I can make a desicion. And I loved that it is calm :) Have a great sunday!
1 bought the HDMI only version today. I am finding it it warmer and greener than my a7s Ill screen. And when I turn the LUT on its way to contrasty. I tried adjusting the hue and saturation, but no luck. Any suggestions? I know that you like the OSEE, but I'd prefer not the spend the extra money. do you have any new updates?
Thanks for the review but I hope you can give more info. I need a monitor just to replace the onboard LCD on my Panasonic ag-ux180 which is useless in sunlight. I don't need LUTs or waveforms etc. I just need to see on the screen and be able to do quick focus. Any monitors that you can recommend?
The LUT6 is a pretty bright monitor, letting you see out in sunlight. Anything over about 1500nit should be pretty good, and from there you'll just want to find something that's the size you want with an easy to use user interface that fits in your budget. Newer Feelworld monitors like this LUT6 are easy to use and a great value for the money. There are definitely better monitors for more money, but I don't think many people would be disappointed with something like this either. Hope that helps!
I bought the HDMI only version today. I am finding it it warmer and greener than my a7s III screen. And when I turn the LUT on its way to contrasty. I tried adjusting the hue and saturation, but no luck. Any suggestions? I know that you like the OSEE, but I'd prefer not the spend the extra money.
1 bought the HDMI only version today. I am finding it it warmer and greener than my a7s Ill screen. And when I turn the LUT on its way to contrasty. I tried adjusting the hue and saturation, but no luck. Any suggestions? do you have new updates?
Thanks for watching :) Yes, some small delay is pretty typical and often a side effect of the camera/HDMI more than the monitor itself. No problems worse than others with this monitor in my experience :)
You alluded to the monitor being able to pass the signal from HDMI to SDI twice but never showed it or proved that it can. Im still not sure and need to know. Thanks
Hi! I’m unknowingly about external monitor and I want to know how this working actually. What you set and see on the monitor will be recorded on internal camera? Or is just for better observation for what are you filming? Thank you!
Scott. I've just purchased one, when it comes to luts on my A7siii, I have the camera set in slog 3 but when I choose slog 3 and cine gamut (sub option) I van barely see the image on the monitor as it is so dark. Why is this and how do I resolve this?
Hi! Hmm.. I'm guessing you mean with the LUT applied on the monitor to correct it to 709? You could always load in your own LUT to use instead, sometimes the stock ones don't work so well
Scott: LUT Out... I think the LUT output is on the SDI only, not over hdmi out. I bought one and the hdmi out was unaffected by the LUT on w/ LUT output on. Looked at the small manual and it suggested that the LUT looped out is available over the SDI.... did you find that to be the case?
I just bought it and the same problem with mine. No LUT output on HDMI. If the LUT output is only on SDI they don't specify this on how they advertise it. If this is the case this is ridiculous. Most cameras with SDI output have the ability to output a LUT. I wanted to use this with my Sony FX3 so when I shoot SLOG3 I can send out the LUT out to my transmitter and the client can see the image with a LUT on the bigger video village monitor. It also not as bright as they say. I have the LUT7 and it has 2200 nits compared to the 2600 that the LUT6S should have, and the LUT7 looks twice as bright.
Both great monitors haha... very hard to choose one over the other. I think I like the Feelworld user interface/menu system just a little bit more though.
Thanks so much! I'm not sure about the cage actually- good question. I'll have to look into it and/or see if any other cages fit (like the F6 Plus cage fit the F5 Pro, for example)
Yes if you have the time it would be nice! The mounting points on the side and bottom makes it a litte bit trickier to find one that fits perfectly.. thanks! :)
Hi Scott got a LUT6s after watching yours and a couple of other reviews, so thanks for the great review! Question; my monitors fan won’t turn on under any settings, have you ever had this problem? Do you know if there is a solution or is mine broken
Hey, not sure about that- it is pretty quiet so it could be possible that it's just too quiet to notice? If it really doesn't go on in any mode, I would assume something is broken :-/
@@ScottDumas Turns out it was broken, so I returned it. The employee didn’t understand the item and he watched this video as a guide lol, thank you Scott!
Hi. Thanks for your cool Videos. Like it. BUT: ;) I finally bought the LUT6 because of your Tutorial.. Where you also mention, that the FPS would be no problem at all, because this could be set in the HDMI Output preferences of the Camera. That’s actually not true as far as I got to know now... my Nikon Z7 cant as it look.. AND I need to have more than 60 fps... so I have no picture on my LUT6 😭😭🤨?!! Any tips / comments? 🙏🏻
Hi! I’m sorry to hear that. I just researched it a bit and it seems that with the Z7 it’s not a monitor compatibility issue but the camera can’t use HDMI at all in high frame rates apparently. I found this: “HDMI output is not available while movies are being recorded at movie frame sizes of 1920 × 1080 120p, 1920 × 1080 100p, or 1920 × 1080 slow-motion or when the camera is connected to a computer running Camera Control Pro 2.” So unfortunately it seems that no other monitor would solve the problem either :(
I can't remember exactly which are pre-loaded off hand, usually more standard LOG LUTs are pre-loaded, if any. But you should be able to load your own depending on what you usually use, or even create your own custom LUT and load it in there to work better with your workflow.
@@ScottDumas HLG3 in Sony a73 is what I shoot with . If you can confirm this from your device I would be grateful and purchase it without worries. Much thanks .
@@prashanth_nayak I won’t be back in the studio until Monday, but you can load any LUT into this monitor so even if it’s not pre-loaded, you can add it after. All you need is a .cube file, no problem at all :)
depending on the camera you should have the ability to output a lower resolution/frame rate over HDMI even while shooting 120fps so that it's compatible with monitors.
Never used the Shinobi in all honesty but I have the Ninja V, and from my experience they're both good in their own ways but have drastically different controls/user interfaces. Atomos has a good reputation but the Lut6S does have a good amount of assist features built in, a nice UI and good price for the hardware you're getting. Without even trying it though I'm sure the Shinobi is made better, physically speaking.
@@ScottDumas No I haven’t I just wanted sure if it would support or if there’s and firmware updates that need to be done. I ordered one so hopefully everything goes smooth.
@@ScottDumas you mean brighter then the LUT 6S? OK have you noticed kinda mirroring outdoors? What I mean with that check out at 4.09 the screen is like a mirror, reflects and you can't see ua-cam.com/video/5iNVcEouNoQ/v-deo.html
@@vasiliosm It's not the best with that mirroring/glare but it's not the worst because it is very bright. I'm not sure about cages for it just yet but when there is a cage available it will also no doubt have a hood to help against that problem as well.
@@ScottDumas oooohhhh thank you so much! I wonder if you have the ninja 5 is it so much better? and of course outdoor use indoor are all screens just fine. You know I am from Greece and with so much sun its a problem tahnsk again
@@vasiliosm This is brighter than the Ninja 5, and I like the Ninja for recording but I actually don't love it as a monitor. It's not bad but I don't love the user interface and it is a little heavy, sucks up batteries more than you'd expect for the level of brightness and has a slightly noisy fan. If brightness is your concern, the LUT6 or Osee T7 would be your best choices.
Привет. Для Fujifilm XT- 4 купил Feelworld LUT6.... Перед этим смотрел массу обзоров, но пока не купишь - не поймёшь. Что понял: 1. Служебная информация с камеры на экран в режиме видео не выводится! В режиме фото - есть. 2. Цвета - просто анреал!!! 3. Очень греется при яркости уже в 50%. Вопрос: и на хрена он такой нужен? Здесь тоже про это: с 09.08 мин. ua-cam.com/video/EI6Ec2_6f9s/v-deo.html
If any reviewers are watching this-THIS is how you make a review. Answered 4 of my questions in first 3 minutes, keep up the good work!
I watched sooo many reviews the last few days, because I m new to this monitor stuff and most of the time at the end of the review I m clueless. Your review was one of the few in which I felt I learned something and that I can make a desicion. And I loved that it is calm :) Have a great sunday!
Best review on the lut6s hands down! Checked them all. Very impressive dude!
Much appreciated!
1 bought the HDMI only version today. I am finding it it warmer and greener than my a7s Ill screen. And when I turn the LUT on its way to contrasty. I tried adjusting the hue and saturation, but no luck. Any suggestions? I know that you like the OSEE, but I'd prefer not the spend the extra money.
do you have any new updates?
Thanks for taking us through all those features! You answered all my questions 👍 I like the left swiping feature to quickly change the backlight.
Glad it was helpful! :) Thanks for watching
What a great review, thanks for the insight on that monitor. Got all the answers I needed !
Thanks for the review but I hope you can give more info. I need a monitor just to replace the onboard LCD on my Panasonic ag-ux180 which is useless in sunlight. I don't need LUTs or waveforms etc. I just need to see on the screen and be able to do quick focus. Any monitors that you can recommend?
The LUT6 is a pretty bright monitor, letting you see out in sunlight. Anything over about 1500nit should be pretty good, and from there you'll just want to find something that's the size you want with an easy to use user interface that fits in your budget. Newer Feelworld monitors like this LUT6 are easy to use and a great value for the money. There are definitely better monitors for more money, but I don't think many people would be disappointed with something like this either. Hope that helps!
@@ScottDumas thank you for the info, I'll see if I can fins one here in South Africa.
If my monitor is showing my screen with black borders could it be my hdmi cable which is preventing it from using the full screen?
I bought the HDMI only version today. I am finding it it warmer and greener than my a7s III screen. And when I turn the LUT on its way to contrasty. I tried adjusting the hue and saturation, but no luck. Any suggestions? I know that you like the OSEE, but I'd prefer not the spend the extra money.
Supports the control and display of the autofocus point? For canon R.
1 bought the HDMI only version today. I am finding it it warmer and greener than my a7s Ill screen. And when I turn the LUT on its way to contrasty. I tried adjusting the hue and saturation, but no luck. Any suggestions? do you have new updates?
Thanks for the video. You mentioned that there is a 2 frame delay in the monitor. Is this common for any camera external monitor?
Thanks for watching :) Yes, some small delay is pretty typical and often a side effect of the camera/HDMI more than the monitor itself. No problems worse than others with this monitor in my experience :)
You alluded to the monitor being able to pass the signal from HDMI to SDI twice but never showed it or proved that it can. Im still not sure and need to know. Thanks
Hey bro, thanks for the review! What about the Feelworld LUT6 vs LUT7
moving next month!would have been able to buy a GH4 with 2 lenses, but that have to wait till after newyear!
Ciao, un informazione ... se utilizzi l'ingresso hdmi fa i loop anche con l'uscita sdi? grazie
Do you know how to factory preset the monitor? I have it connected to my black pocket 6k in raw but i am getting a green tint color on my fieldworld
Can we pinch to zoom to check focus like on iphone?
Can I see my video on this monitor if I recording at 100fps in ful hd? Or 50fps on 4k??
f6 plus vs f5pro? which is better? thanks
F6 plus for sure unless you need the battery design of then F5 pro. The included features are much more advanced
I grabbed the HDMI version a week or so ago.
Hi. Does the HDMI version export the LUTS? Other comments seem to say no, but that the SDI version does. Thank you.
Hi! I’m unknowingly about external monitor and I want to know how this working actually. What you set and see on the monitor will be recorded on internal camera? Or is just for better observation for what are you filming? Thank you!
Hi! This is just for better observation, nothing will affect what's actually recorded on your camera
Would you know if there are any cages from anyone that will fit this?
Scott. I've just purchased one, when it comes to luts on my A7siii, I have the camera set in slog 3 but when I choose slog 3 and cine gamut (sub option) I van barely see the image on the monitor as it is so dark. Why is this and how do I resolve this?
Hi! Hmm.. I'm guessing you mean with the LUT applied on the monitor to correct it to 709? You could always load in your own LUT to use instead, sometimes the stock ones don't work so well
@@ScottDumas thanks Scott, I'll give this a try today.
I ve had Portkeys Bm5 and LH5H and they had both terrible colour and washed out shadows.. Is feellworld any better colour and contrast wise?
I’m between these two monitors too..
Can it touch to focus?
Can the LUT6S do 2.40:1 aspect ratio marker?
Scott: LUT Out... I think the LUT output is on the SDI only, not over hdmi out. I bought one and the hdmi out was unaffected by the LUT on w/ LUT output on. Looked at the small manual and it suggested that the LUT looped out is available over the SDI.... did you find that to be the case?
Good call, I think you may be right.
I just bought it and the same problem with mine. No LUT output on HDMI. If the LUT output is only on SDI they don't specify this on how they advertise it. If this is the case this is ridiculous. Most cameras with SDI output have the ability to output a LUT. I wanted to use this with my Sony FX3 so when I shoot SLOG3 I can send out the LUT out to my transmitter and the client can see the image with a LUT on the bigger video village monitor. It also not as bright as they say. I have the LUT7 and it has 2200 nits compared to the 2600 that the LUT6S should have, and the LUT7 looks twice as bright.
Nice video! I’m gonna buy one!
Thank you!
Im trying to decide between this Feelworld LUT6S and Feelworld F6 Plus .
Don't know if extra 130$ will be worth it
If you're outdoors a lot, the extra brightness can definitely make a significant difference.
@@ScottDumas i'm always shooting outdoors hehe, i guess it will
Hi there! Is there a way to change the LUT intensity like on SmallHD models? As sometimes the LUTs I use are best around that 50-70% intensity mark
Unfortunately not that I'm aware of. Feelworld- if you're reading, this is a great feature to consider adding in firmware or future models ;)
Still dont know which should I buy, Feelworld Lut6 or Portkeys LH5H
Both great monitors haha... very hard to choose one over the other. I think I like the Feelworld user interface/menu system just a little bit more though.
Again.. nice review 👍💯💯
Thanks so much! :)
Hi Great review! I have the LUT 6 and I think that its great, do you know if there is a monitor cage for it yet? :)
Thanks so much! I'm not sure about the cage actually- good question. I'll have to look into it and/or see if any other cages fit (like the F6 Plus cage fit the F5 Pro, for example)
Yes if you have the time it would be nice! The mounting points on the side and bottom makes it a litte bit trickier to find one that fits perfectly.. thanks! :)
Definitely interested in info on this!! Great video!!
Hi Scott got a LUT6s after watching yours and a couple of other reviews, so thanks for the great review!
Question; my monitors fan won’t turn on under any settings, have you ever had this problem?
Do you know if there is a solution or is mine broken
Hey, not sure about that- it is pretty quiet so it could be possible that it's just too quiet to notice? If it really doesn't go on in any mode, I would assume something is broken :-/
@@ScottDumas Turns out it was broken, so I returned it. The employee didn’t understand the item and he watched this video as a guide lol, thank you Scott!
@@vinjemmy Haha, glad to hear it all got worked out! :)
can the battery be charged on the monitor?
Unfortunately not
Hi. Thanks for your cool Videos. Like it. BUT: ;) I finally bought the LUT6 because of your Tutorial.. Where you also mention, that the FPS would be no problem at all, because this could be set in the HDMI Output preferences of the Camera. That’s actually not true as far as I got to know now... my Nikon Z7 cant as it look.. AND I need to have more than 60 fps... so I have no picture on my LUT6 😭😭🤨?!! Any tips / comments? 🙏🏻
Hi! I’m sorry to hear that. I just researched it a bit and it seems that with the Z7 it’s not a monitor compatibility issue but the camera can’t use HDMI at all in high frame rates apparently.
I found this: “HDMI output is not available while movies are being recorded at movie frame sizes of 1920 × 1080 120p, 1920 × 1080 100p, or 1920 × 1080 slow-motion or when the camera is connected to a computer running Camera Control Pro 2.”
So unfortunately it seems that no other monitor would solve the problem either :(
@@ScottDumas oh. Thank you very much! Bad news.. :(
@@ScottDumas you know if this works with the new Z6ii or Z7ii ?
@@horstbieber553 as far as I can tell the z6/7ii shouldn’t have any issues with HDMI output but I’m not 100% sure
I could not see HLG in the LUTs . Is it available or not ?
I can't remember exactly which are pre-loaded off hand, usually more standard LOG LUTs are pre-loaded, if any. But you should be able to load your own depending on what you usually use, or even create your own custom LUT and load it in there to work better with your workflow.
@@ScottDumas HLG3 in Sony a73 is what I shoot with . If you can confirm this from your device I would be grateful and purchase it without worries. Much thanks .
@@prashanth_nayak I won’t be back in the studio until Monday, but you can load any LUT into this monitor so even if it’s not pre-loaded, you can add it after. All you need is a .cube file, no problem at all :)
Hi. Can you shoot 120fps with it?
depending on the camera you should have the ability to output a lower resolution/frame rate over HDMI even while shooting 120fps so that it's compatible with monitors.
How does it compare to the shinobi
Never used the Shinobi in all honesty but I have the Ninja V, and from my experience they're both good in their own ways but have drastically different controls/user interfaces. Atomos has a good reputation but the Lut6S does have a good amount of assist features built in, a nice UI and good price for the hardware you're getting. Without even trying it though I'm sure the Shinobi is made better, physically speaking.
will this monitor work with the Sony a6400 ?
It should work as far as I know, are there any issues in particular you’ve experienced before with other monitors?
@@ScottDumas No I haven’t I just wanted sure if it would support or if there’s and firmware updates that need to be done. I ordered one so hopefully everything goes smooth.
is this just an 8 bit display?
I think so.. I haven't found anything advertising a 10 bit display so I'd assume it's 8 bit.
@@ScottDumas thanks! have you used the desview r6? been wondering which of the two is the better option
This is Very interesting because of the nit
Definitely good to have another very high bright monitor available
@@ScottDumas you mean brighter then the LUT 6S? OK have you noticed kinda mirroring outdoors? What I mean with that check out at 4.09 the screen is like a mirror, reflects and you can't see ua-cam.com/video/5iNVcEouNoQ/v-deo.html
@@vasiliosm It's not the best with that mirroring/glare but it's not the worst because it is very bright. I'm not sure about cages for it just yet but when there is a cage available it will also no doubt have a hood to help against that problem as well.
@@ScottDumas oooohhhh thank you so much! I wonder if you have the ninja 5 is it so much better? and of course outdoor use indoor are all screens just fine. You know I am from Greece and with so much sun its a problem tahnsk again
@@vasiliosm This is brighter than the Ninja 5, and I like the Ninja for recording but I actually don't love it as a monitor. It's not bad but I don't love the user interface and it is a little heavy, sucks up batteries more than you'd expect for the level of brightness and has a slightly noisy fan. If brightness is your concern, the LUT6 or Osee T7 would be your best choices.
I am going to buy lut6 because of touch screen
the touch screen definitely works very well with their new interface and menus
Привет. Для Fujifilm XT- 4 купил Feelworld LUT6.... Перед этим смотрел массу обзоров, но пока не купишь - не поймёшь.
Что понял: 1. Служебная информация с камеры на экран в режиме видео не выводится! В режиме фото - есть.
2. Цвета - просто анреал!!! 3. Очень греется при яркости уже в 50%.
Вопрос: и на хрена он такой нужен?
Здесь тоже про это: с 09.08 мин. ua-cam.com/video/EI6Ec2_6f9s/v-deo.html
tak cross convert.. payah gakkk