Це відео не доступне.
Перепрошуємо.
VW Narrowed Front Beam! Adjustable Beam! Volkswagen BUG | JW Classic VW
Вставка
- Опубліковано 15 тра 2020
- **JW Classic VW** brings you a great video on narrowing your VW beam on a Volkswagen Bug! This is a great option for anyone who has a 2" narrowed beam and needs that extra clearance a 4" narrowed beam has.
** Featured Site **
www.penntoolco...
These are the reamers I picked up
1 x HSS Adjustable Blade Reamer, 1-11/32" - 1-1/2" - 43-488-6 $64.50
1 x HSS Adjustable Blade Reamer, 1-1/2" - 1-13/16" - 43-489-4 $91.40
🛠* Parts, Tools & Materials *🛠
CIP1 2" Narrowed Link Pin Beam - www2.cip1.com/...
Bearing Puller - amzn.to/2z2Ixm8
Bearing Installer - amzn.to/369kNsO
Carbide Burr Set - www.eastwood.c...
** HERES HOW TO CONNECT w/ JW Classic VW **
📧 JW Classic VW Email 📧
JWClassicVW@Yahoo.com
🤖 The Facebook Group 🤖
www.facebook.c...
📬 Mailing Address 📬
JW Classic VW
2951 Marina Bay Dr.
Suite 130 - 661
League City, TX 77573-2785
⭐ Other GREAT VW Channels ⭐
These are the ones I’m watching every Saturday morning while drinking my coffee!! 😊
⭐⭐ THE TOP 5 ⭐⭐
#1 DuckmanCycles and VW Garage - / @duckmancycles
#2 CT - / @ctmoog
#3 5150mxVW - / @5150mxvw
#4 VW Life - www.youtube.co...
#5 Mike Fn Garage - / @mikefngarage
🛑Disclaimer🛑
JW Classic VW is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Any information on performing maintenance or modifying your vehicle viewed on this channel is intended for general guidance only and must never be considered a substitute for the advice provided by a Certified Professional.
🎶 Music Credit 🎶
Twenties by Peyruis / peyruis
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / hypeddit.com/t...
Music promoted by Audio Library • Twenties - Peyruis (No...
The Other Side by Lesion X / lesionxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/twentie...
Music promoted by Audio Library www.audiolibra...
Charmed by Declan DP Music / declandp Creative Commons -
Attribution 3.0 Unported - CC BY 3.0 creativecommons...
Music promoted by Audio Library - • Charmed - Declan DP (N...
Be Sure to **LIKE, SHARE, & SUBSCRIBE** Thank you for all the support!!!
In the description
NICE INFORMATION THAT YOU SHARE HERE JW
I’m so glad I bought a narrowed beam instead of making one lol. Good job doing it with the beam still attached to the car!
Thanks man!! Yup having the 4" narrowed beam would have been cool, but this worked out well!
We like goosing around with our bug's! 😜 You don't shy away from anything...👍
Lol... yes!! So true man... love a challenge!
Cool project JW Classic VW, you made it look easy! Isn't it crazy how one mod leads to another? It's the gift that keeps on giving!
This is the story of modifications!! 😆 Thanks for being here brother!!
Next time, I recommend that you ream the hole before cutting the end of the tube off...that way the original bore will help you keep everything in line as it easy to get it out of line using the drill while sat on the floor.
Great video though, keep up the good work
That is a great idea Dave!! Thanks for the info man!
Maybe next time Jason! 😂
It's nice to see you do it in a normal size garage off the floor with not much room like must of us have to :)
So true! I live on the concrete brother!!
Great video Jason! Thanks for sharing your knowledge!
Any time! Thanks for watching brother!
Great video!
Hey mate you are definitely my favourite VW channel to watch and possibly my favourite UA-cam channel but Sarah N Tuned is great too, so maybe it's a tie. I've gained heaps from your efforts so please keep it up. Much appreciation from the land down under!
Thanks so much Brook!! Glad you like the channel, it means so much and I'm so happy you found Goose and I.
@@JWClassicVW I have shared your yup tube link on several Aussie VW FB sites to so i am sure that you'll pick up some extra followers.
@@Meyersmanx1 That's awesome!! Thank you!
Good job man. I can't wait to see Goose again.
Thanks brother!!
Nice looking stance you got there with this setup 👌
Thanks brother!! I do like it!
Good job. The bug looks great.
Glad you like it, thanks brother!
Great video!! I'm going to try and install an Empi 2" adjustable beam on my 59 Ragtop. Wish me luck..
Glad you liked the video brother!! Good luck on the beam install, I'm sure it will go great!
Another awesome video. Thanks for sharing 👍
Thanks Shawn!! Glad you liked it man!!
As usual Jason, nice job!
I appreciate that!!
Great work. That saw is a "Sawzall" or " Reciprocating saw". A Skillsaw is a worm-drive unit similar to a "circular saw" but far superior.
Thanks for the info!
Thanks for sharing, Jason!
Any time! Thanks for watching man!
Great video. I’m also looking at a narrowed beam. Did you need to make any mods to the steering geometry? And how does your set-up handle?
How shorten beam affected in sharp turn in Hollywood Bowl. In straight I guess no worry...
Everything is good to go... no problems turning.
Excellent job. Could you tell how many percent of softness is lost compared to the original suspension. Thanks
oh it's a pretty big difference, but I love the feel
👍
Great videos!! Where did you find a 4” narrowed sway bar? Thanks
Made it out of a 2" narrowed sway bar.
She’s looking good
Thanks brother, she is looking FINE!!!
Thanks for the good video and knowledge....
You bet!
great Job bro well done
Thanks brother!! Appreciate the support man!
That is most likely an inexpensive reamer and its good you got great results...However...
There is a better way to use it. The typical method is to adjust it so it is slightly too small, take a pass, then increase the diameter and the cut slowly. In your case maybe 7-10 passes or more to do a 1/8" cut. You creep up on the press fit tolerances that you need. The result will be very round holes with uniform and parallel sides.
Your reamer will also last a lot longer too.
Yes. this adjustable reamer was pretty cheap compared to something pro level. This was definitely my first time venturing into something like this and was pretty happy with the results considering. That is some good info there and 100% correct on making multiple passes... live and learn my friend.
@@JWClassicVW Thank you for putting yourself out there with a great subject and successful channel.
It is not easy to do and takes great effort. Keep going, we are all learning from the work you are doing.
I learned to use a reamer on bicycle seat tubes. I build custom bicycle frames and after welding the seat tube where the seat post enters, it is not to size and loses its roundness so you have to open it up again. Its a high precision operation to +- 0.02".
Another tip with the reamer is to be very careful when adjusting or when disassembling them for cleaning. The blades are high carbon steel and very brittle. If you drop one, chances are it will break...ask me how I know! So adjustments should be 1/8 turn at a time.
I appreciate that man!! Means a lot!
I'm gonna send a couple beams to League City for you to narrow. Heheheeeeeeeeeeeeee!
Lol... thats funny, half the time I'm not completely sure things are going to work until they do... then I'm like dang... that WORKED!
Great job.
Thanks brother!!
Interesting what brake kit is that please.
This brake kit is the Bad Brake kit from Airkewld... I did a video on it as well!
ua-cam.com/video/GQlM76xHxuE/v-deo.html
Did you reuse the needle bearings in your beam? If yes, why did you choose that over just a Urethan bushing?
Yes I kept the needle bearing, these are far superior "in my opinion" to the poly type inserts. There are some other bushing made of Delrin that are pretty nice.
I appreciate your reply. It’s hard to decide what to replace my chopped beam with. I like the CB performance 2” narrowed with needle bearings and I like the Airkewld 4” narrowed but the bummer is no needle bearings
I haven't experienced the Airkewld beams but they look awesome!
@@JWClassicVW do you have an inner bushing in your beam that you have to replace? If yes, what tool is used for that?
No inner bushing, just the bearing.
Just got a 4” narrowed beam I haven’t done this before can I use the same stock trilling control arms with my 4” beam ? Like I say in new to do this I also get a pair of 2” 1/2 drop spindles somebody tell me don’t to install those cause the bug will be on the floor so I think I will just install the beam mistakes jajajaja hope this turns up well
Hey brother thanks for the question... and as for using your stock torsion arms, YES! Great question to, I'm sure lot's of people have that one. As for the drop spindles, you can use those to, even if your new beam isn't adjustable. The reason why people narrow the beam is to fit the tires under the fenders when using drop spindles.
Would love to see some pics... Join the Facebook group and share!
Did you have to shorten you tie rods
Nope.. I already had the tie rods for a 2" narrowed beam and those worked.
What anti roll bar are you using? I can only find a 2in narrowed one in the UK and my beam is 4in narrowed
It is the 2" narrowed front stabilizer from CIP1, I just cut it down on both sides to get it to fit. Also had to use ratcheting straps to pull it into place. A little scary but worked... didn't video that because I don't want people killing themselves...lol
What Beams are these.....? it doesn't look like Original Type 1 Beams.
Definitely not the original, it was an Empi 2 inch narrowed beam but I cut another 1.5 inches off both sides so now it's more like a 3.5 inch narrowed beam.
Hey Jason, did you find any noticeable stiffening of the suspension after narrowing the leaf stack?
No I would say the ride is just about as it would be stock, I do have an adjustable beam and 2.5 drop spindles as well.
@@JWClassicVW Thanks Jason. I'm only 1.5 inches static drop but I may go lower so it's handy to know, cheers :)
I use my seat belts for steering lock
That's a good idea right there! I like it!
dude I looked at a hundred sites for that tool ordered 2 different ones which ill send back now that you showed this. bitchen bud. for that I subed ya I gotta 61 double
That is awesome! Always happy when I can help out brother!
What does narrowing do to the bug?
This was needed for my VW because of the added offset added with the new front disc brakes. The narrowed beam allows the wheels and tires to fit under the fenders correctly.
@@JWClassicVW Again. Thanks for the education 🙂
What brand drill bits sit you use for the ends
Check out the video description brother all info listed there. 😃😃
I see t he Cambridge set but not the drill bit set
Those jack stands part of the recall?
Probably haven't checked yet...
Nice job done boy with all the description but that beam is not original for it looks
Yup not original, it is a 2" Narrowed beam that I narrowed about another 2"... so closer to a 4" narrowed beam now. 👍😎👍 Thanks for being here brother!
@@JWClassicVW yes i like your videos that's educational for VW enthusiast i like and have video in my files thank again i will be waiting for other episodes
@@nataliomaduro6320 Awesome brother!
I will be busy with a mexican engine 1600 fuel injection to start Brake & lines new be made flywheel 4 to 8 dowel heavy duty press plate and header all that's to begin after a chemo therapy mean while change the fenders
What sway bar are using your 4" narrowed beam?
Hey whats up Jack! Its a sway bar made for a 2" narrowed beam that I cut to fit. I also had heat and bend it just a little.
@@JWClassicVW cut how or is there a video i should go looking for . . .
I'm swapping out my beam for a 4" narrowed beam and i want to run a swau bar also.
There is no video on it brother... wasn't sure it was going to work. I just cut about 1 inch off each side then bent at the end angle about another 10 degrees in.
@@JWClassicVW ok at least i have a direction to head on the sway bar ;-D
go with a smaller diameter tire, save you some grief.
Already done!! And everything fits great... little bit of work and I get to keep the tire size I wanted!! Thanks for being here brother!!
@@JWClassicVW i know, but call me next time you want to reinvent the wheel.lol
Great video !
Thanks brother, glad you liked it!