Renault Clio 4 Removing the door Panel and taking out the window

Поділитися
Вставка
  • Опубліковано 24 січ 2025

КОМЕНТАРІ • 19

  • @Beethoven2949
    @Beethoven2949 Рік тому +2

    very helpful my Clio didn't come with the rear speakers so gonna pull the door panel off and see what's underneath 😊

  • @skirtingman
    @skirtingman Місяць тому +1

    Great, thanks for doing this

  • @ricardohogerhuis5630
    @ricardohogerhuis5630 10 місяців тому +1

    hi i have a question. how did you remove the panel so easy. i needed alot of power and some buttons broke when i pulled it off

    • @JanSV
      @JanSV  10 місяців тому

      Hello, indeed the panel came of realy easy. I don' t know if the previous owner already took it of. But i don' t think so. No clips broke when i removed it.

  • @larkinsen
    @larkinsen 4 місяці тому +1

    Very nice explainedDo you have a video on how to mount back the window on the rear door?My window was smashed and i have to put a new one.

    • @JanSV
      @JanSV  4 місяці тому +1

      Hello, i have not filmed how i put the window back into the car, it is the same way in reverse. On the gaskets on the 2 outsides, i always do some (dreft) that is a product in belgium if you do the dishwash by hand, to remove the grease from your dishes. First put in the window, then you can do some dreft to the gaskets and slide in below. Good luck. Jan

    • @larkinsen
      @larkinsen 4 місяці тому

      @@JanSV Thanks for the response.By using your tutorial I could take down the door panel and clean the all the debris. My window being smashed I didn't have to take it down ,so the gaskets are still on and also that metallic part that I believe that I don't have to take it down anymore if the window is already out??The only part of the former window that remained was the two holes where the screws fix the window.So I took those screws out and using your tutorial in reverse the first step would be,after I "grease" the window and the gaskets as you said,then I put the window through the gaskets and further down until those 2 holes can be screwed,right? :))

    • @JanSV
      @JanSV  4 місяці тому +1

      @@larkinsen Hello. To place the new window in the car. You have to make room to place the window in the door. So you need to remove the gaskets and also the metal part. Otherwise it is not possible to put the window in place. If you live close to antwerp belgium. I could help you for free.

    • @larkinsen
      @larkinsen 4 місяці тому

      @@JanSV Thank you for your response and kindness to help me.I don't live in Belgium unfortunatelly.But now I understand better how can I put the window and it's a bit clearer.Thank you again.

    • @JanSV
      @JanSV  4 місяці тому

      @@larkinsen You Are welcome. Jan

  • @CamelliaSinensis
    @CamelliaSinensis 8 місяців тому

    So the motorized window crank cable is available but unhooked?

    • @JanSV
      @JanSV  8 місяців тому +1

      I did not check that. I dont think it is available on our car.

  • @RisunaWayne
    @RisunaWayne 9 місяців тому

    Where is the door lock sensor located on that panel

    • @JanSV
      @JanSV  9 місяців тому

      No idea

  • @noufissafrombelgium
    @noufissafrombelgium Рік тому

    Best place to find Renault Clio 2016 door mechanism drivers side.?

    • @JanSV
      @JanSV  Рік тому

      Official Renault dealership.

    • @James-lq1po
      @James-lq1po 3 місяці тому

      Breakers will be much cheaper no doubt…

  • @userboykey121
    @userboykey121 2 роки тому +3

    Wow 👍