Pumped to be partnering with GATE Electronics for the launch of their GATE Titan NGRS! You guys make sure to share your settings down below so we can all try them! 👇
I put a Gate Titan in my Mp5a3 first and loved it so much I've put them in all my other AEGs and friends AEGs too!! Its one of those parts you look at thinking you dont need but when you install it and use it, you wonder how you ever played airsoft without it...
seriously you have to be the best airsoft channel on youtube in my opinion. next time airsoftologly post up a video we need to recommend chupacabra outdoor for the featured channel instead of all the other meh channels that get recommended.
Un'ottima alternativa é il warfet che uso da 2 anni su un tm 416c. Non si basa sulla lettura ottica degli i ingranaggi ma sul tempo in millisecondi, quindi é più impreciso ma da comunque ottimi risultati, mentre la vera mancanza del warfet é che se abbassi la percentuale di rateo abbassa in automatico anche il colpo singolo mentre col titan puoi gestire le cose separatamente con l'intelligent trigger function. C'é da dire però una bella cosa in merito al warfet, e cioè che ne compri uno e lo monti su tutte le asg
Se nn erro siamo sui 120 euro Giusto? È consigliabile prendere un tira gate per potenziare il mio cm18 della g&g oppure comprarsi un fucile entry level
PadLogic ciao, allora g&g è già un ottima base. Probabilmente è anche più prestazionale di alcune repliche che magari sono più curate esteriormente. La cifra si aggira intorno ai 150€ per l’advance v2 che è quello che ti consiglio assolutamente. Hai tutte le funzioni e sono quelle che fanno la differenza. Ti consiglio senza dubbio di upgradare il tuo cm18 che è già ottimo e con qualche miglioria nel Gruppo aria oltre a titan può diventare un mostro di replica.
@@riccardobulgarelli Prima di tutto ti ringrazio mille per la risposta e per le delucidazioni gioco a softair da 2/3 anni e vorrei cimentarmi sull'upgradare le repliche. Io avevo pensato di allungare la canna del fucile e compensare la lunghezza montando un silenziatore ma non saprei quale canna prendere (marca),e lo spessore ? Una 6.02 andrebbe bene? (Uso pallini g&g 0.20 no bio)
PadLogic figurati, non c’e problema. Comunque, allungare la canna non ti porterà nessun vantaggio. La precisione massima ce l’hai con canne dai 229 ai 300 mm circa che è esattamente quella del tuo cm18. Una canna più lunga ha bisogno anche di più aria quindi anche il cilindro andrebbe cambiato per via del foro. E comunque ti porterà solo svantaggi in termini di gittata e precisione. Se vuoi aumentare quest ultime ti consiglio testa pistone in pom della fps e testa cilindro in alluminio sempre fps, magari abbinati con il pistone arancio della medesima marca italiana. Se hai pazienza 1/2 mesi dovrebbero uscire anche le loro canne di precisone da 6.03 e ti consiglio di tenere la stessa lunghezza del cm18. Chi le ha testate dice che sono veramente fatte benissimo.
@@riccardobulgarelli Ti ringrazio molto anche Perchè si capisce che ne sai è sei anche "sul pezzo" io fortunatamente ho dimestichezza con il smontare gearbox e saprei anche spessorarlo il problema è che Nn saprei quali spessori comperare E se cambiare o meno le boccole
So does the pre-cocking interfere with the recoil at all? I guess I always assumed the recoil is tied to the piston slamming back, but does the recoil mech actually go off when it's released and fires? I actually don't really know much about how the NGRS recoil system works, I haven't been able to find much info about what creates the recoil.
Thank you for the video! very well made as always with your videos. I'm planning to buy a gate for my NGRS do you have any advise on the modification on the gears/motor/piston? Do you have some aftermarket parts to recommend?
I like SHS gears and high torque motor, as piston I still think the best (and cheapest) out there is (or was, seems like it's discontinued) the King Arms full metal teeth, but I also like the Magic Box half metal teeth piston which is on this HK416 btw!
PyS1k3 1 second ago 9:48 Airsoft AEGs and especially those mods to make the trigger so sensitive are far from simulating a real firearm, other than simunition, GBBs and markers such as the ones from T4E or RAP 468 are better choices for training purposes
trigger sensitivety are adjusted in the app, from a trigger you can set off by blowing on it, to a trigger that has to travel all the way through the well to fire, trigger weight can be adjusted with spring weights, I would agree a GBB would be by far the best training tool. markers I would say loose a lot of points for their cost to operate
@@CHUPACABRAOUTDOOR i dont think there are cut outs in the gear box for the wiring to be rear wired and i think they made it like that because of the folding stock so although the battery is housed in the stock the actual wiring comes out the front of the gear box
Hi Bogdan, I've actually made an errata corrige in the description this is what guys at GATE reported me: the 30 rds limit is a safety feature that will stop the GATE Titan in case of jam and works only for full auto.
Pumped to be partnering with GATE Electronics for the launch of their GATE Titan NGRS!
You guys make sure to share your settings down below so we can all try them! 👇
hey what did you set your rate of fire control at thanks
How do you not have more subscribers for these amazingly edited videos??
I put a Gate Titan in my Mp5a3 first and loved it so much I've put them in all my other AEGs and friends AEGs too!! Its one of those parts you look at thinking you dont need but when you install it and use it, you wonder how you ever played airsoft without it...
seriously you have to be the best airsoft channel on youtube in my opinion. next time airsoftologly post up a video we need to recommend chupacabra outdoor for the featured channel instead of all the other meh channels that get recommended.
Thanks brother! You tell him I always buy his Corgi patches as well! 😂
Un'ottima alternativa é il warfet che uso da 2 anni su un tm 416c. Non si basa sulla lettura ottica degli i ingranaggi ma sul tempo in millisecondi, quindi é più impreciso ma da comunque ottimi risultati, mentre la vera mancanza del warfet é che se abbassi la percentuale di rateo abbassa in automatico anche il colpo singolo mentre col titan puoi gestire le cose separatamente con l'intelligent trigger function. C'é da dire però una bella cosa in merito al warfet, e cioè che ne compri uno e lo monti su tutte le asg
Hy you don't have to switch the precocking off. Disconnect the lipo and connect it again trigger just once and the system is decocked. Greets
Dorian is our bae, great man grom GATE ❤
sweet looking 416
What's difference this with V3? And will this work with new KWA T10 Ronin blowback system?
Soo, only for marui or I can use it in any other brands aeg?
Can It be used at BOLT recoil AEG? (Seems to be a TM Next gen "clone")
Col Titan siamo al TOP!
Can I use this in a g&g arp9 with a warhead motor
Do you have any upgrades to your hop in your NGRS?
Not really, I actually like a lot the stock unit but I do use a Magic Box Miracle Barrell to improve the accuracy!
the bolt catch and recoil still works?
Grande Michi! Bel video.
Da quando ho istallato il titan circa un anno fa è un altra musica. Veramente pazzesco!
Se nn erro siamo sui 120 euro Giusto? È consigliabile prendere un tira gate per potenziare il mio cm18 della g&g oppure comprarsi un fucile entry level
PadLogic ciao, allora g&g è già un ottima base. Probabilmente è anche più prestazionale di alcune repliche che magari sono più curate esteriormente.
La cifra si aggira intorno ai 150€ per l’advance v2 che è quello che ti consiglio assolutamente. Hai tutte le funzioni e sono quelle che fanno la differenza.
Ti consiglio senza dubbio di upgradare il tuo cm18 che è già ottimo e con qualche miglioria nel Gruppo aria oltre a titan può diventare un mostro di replica.
@@riccardobulgarelli Prima di tutto ti ringrazio mille per la risposta e per le delucidazioni gioco a softair da 2/3 anni e vorrei cimentarmi sull'upgradare le repliche. Io avevo pensato di allungare la canna del fucile e compensare la lunghezza montando un silenziatore ma non saprei quale canna prendere (marca),e lo spessore ? Una 6.02 andrebbe bene? (Uso pallini g&g 0.20 no bio)
PadLogic figurati, non c’e problema.
Comunque, allungare la canna non ti porterà nessun vantaggio. La precisione massima ce l’hai con canne dai 229 ai 300 mm circa che è esattamente quella del tuo cm18. Una canna più lunga ha bisogno anche di più aria quindi anche il cilindro andrebbe cambiato per via del foro.
E comunque ti porterà solo svantaggi in termini di gittata e precisione.
Se vuoi aumentare quest ultime ti consiglio testa pistone in pom della fps e testa cilindro in alluminio sempre fps, magari abbinati con il pistone arancio della medesima marca italiana.
Se hai pazienza 1/2 mesi dovrebbero uscire anche le loro canne di precisone da 6.03 e ti consiglio di tenere la stessa lunghezza del cm18. Chi le ha testate dice che sono veramente fatte benissimo.
@@riccardobulgarelli Ti ringrazio molto anche Perchè si capisce che ne sai è sei anche "sul pezzo" io fortunatamente ho dimestichezza con il smontare gearbox e saprei anche spessorarlo il problema è che Nn saprei quali spessori comperare E se cambiare o meno le boccole
So does the pre-cocking interfere with the recoil at all? I guess I always assumed the recoil is tied to the piston slamming back, but does the recoil mech actually go off when it's released and fires? I actually don't really know much about how the NGRS recoil system works, I haven't been able to find much info about what creates the recoil.
recoil uses the forward motion to send the "bolt" the precocing wont effect it.
Thank you for the video! very well made as always with your videos. I'm planning to buy a gate for my NGRS do you have any advise on the modification on the gears/motor/piston? Do you have some aftermarket parts to recommend?
I like SHS gears and high torque motor, as piston I still think the best (and cheapest) out there is (or was, seems like it's discontinued) the King Arms full metal teeth, but I also like the Magic Box half metal teeth piston which is on this HK416 btw!
Sir what kind of gearbox shell is that?
PyS1k3
1 second ago
9:48 Airsoft AEGs and especially those mods to make the trigger so sensitive are far from simulating a real firearm, other than simunition, GBBs and markers such as the ones from T4E or RAP 468 are better choices for training purposes
trigger sensitivety are adjusted in the app, from a trigger you can set off by blowing on it, to a trigger that has to travel all the way through the well to fire, trigger weight can be adjusted with spring weights, I would agree a GBB would be by far the best training tool. markers I would say loose a lot of points for their cost to operate
Hi, i thinking about to get a mosfet for my TM next gen mk18, which one do you recommend? BTC Spectre Mk.II or Gate Titan? Thanks.
GATE Titan! 🤙
Do these fit in the sgr-12?
How to fix titan can't safe mode ?
Ciao, mi chiedevo. Quale la differenza tra basic e advance? Grazie
When is that Italian Raiders Loadout video coming out?
Can ypu use this with ak?
Montata sul mio MK18 Bolt. Non potevo fare scelta migliore ;)
Bei video come sempre
Mosfet should be ETU, Eletronic trigger unit. An ETU uses mosfets, but pretty much almost all electronics use them nowadays.
The Gate Titan is actually an ETU with a contained MOSFET, but is popular to just call it a MOSFET which is incorrect.
@@ema1671 That is literally what I said, MOSFET is incorrect. It is an ETU that uses mosfets for switching.
@@pwntehnoobs Yea, I'm agreeing with you.
@@ema1671 Ah okey, was not clear to me.
Il blocco fine colpi rimane anche con il Titan?
Certo! 😉
Should've waited for the btc spectre to be in stock.
Potrebbe funzionare su un MP5A5 Marui sre?
Bentornato!
front or rear wired for my marui next gen scar l? thanks
Hi, that'd be rear wired! 🤙
@@CHUPACABRAOUTDOOR i dont think there are cut outs in the gear box for the wiring to be rear wired
and i think they made it like that because of the folding stock
so although the battery is housed in the stock the actual wiring comes out the front of the gear box
30 rounds limit = 30 once on Full-auto keeping the trigger pressed , have nothing to do with the mag capacity or bolt stop (empty mag)
Hi Bogdan, I've actually made an errata corrige in the description this is what guys at GATE reported me: the 30 rds limit is a safety feature that will stop the GATE Titan in case of jam and works only for full auto.
@@CHUPACABRAOUTDOOR Great channel !
No IOS support? What is even the point. How much the the program cards for them?
This vs the btc spectre mk2
GATE Titan is much more complete all around, they both work well but the GATE interface is on another planet and you got much more features.
I'd leave my AEG the way it is
Good brand but there fps is so low