How to spray Mazda 41v Soul Red Crystal (tri coat/candy paint)
Вставка
- Опубліковано 4 жов 2024
- This Mazda color 41v can be a tricky color to spray, I wanted to make This to kind of video to help someone out if they ever have issues with this color!
Follow me on my Instagram where I post several times a day!
/ resnik_refinishing
If you want to support me and my channel growth please check out my merch store, t shirts, hoodies, stickers, and even leggings for the ladies..or men! Lol
CHECK IT OUT
teespring.com/...
Music: JUS
Site: icons8.com/music/
Music: Happy Whispers
Site: icons8.com/music/
Instead of using the solvent blender on sealer edges I like to put a clear base coat blender (colorless base coat) over the entire panels before color. It’s like putting a solid down first and it exposes any flaws or burns you may need to address before clear.
I do the same thing. I always rebase the whole hood. Just easier and better.
Gives a better sense of security!
Great job mate. It is so good to see someone who paints with the same technique as myself, take your time, do it right.
Awesome!
Thank you!!
I just did this color on a Mazda CX-5. Had to do every panel except the lift gate and rear bumper. It turned out beautiful. Used EHP with EC530 clear.
I don’t like using a wet bed with glasurit, it never seems to work out how I want it too. When I was shooting ehp i ALWAYS used it! But I still used the solvent to melt the sealer edge before clear base. I miss spraying ppg lol this is a beautiful color though no doubt!
@@Eric_Kinser thanks for sharing! Keep up the good work! 👍🏻
The paint is headache to me coz it has many variants making it different when painting a single part. But thanks coz have learnt something. Great work
Great work Eric! Premium results. The only difference would be; wouldn’t use sealer and blender on the fender and hood, would fix burn- thru’s before. Have gotten into big problems when applying clear and “blending solvent” re- flowing especially on lighter colors… and would put the plug into the hole on the bumper before painting…(my opinion)
As long as the this blender is flashed out I’ve never had an issue with it, I have seen that issue before with other blenders for sure! This was a new raw bumper so I don’t like to have the plug in there, will almost always peel back behind the plug!
I know the last coat what is? My car have apkued the 2 coats but the last is not like yoyrs
Awesome 👏 video bro I really like how that base coat cover up when it goes on wet and boy o boy you smash that clear on lol 😂 keep it up respect ✊✊👍👍👍👍👊👌👌👌✨✨✨👊🙏🙏🙏🙏🙏👏👏👏👏👍💯💯💯💯💯💯💯
I like to make sure they’re slick 👌👌 thank you for taking the time to check out the video!
46V is the Soul Red Crystal. 41V is the less candy colour..
Love that color when I first seen it come out" very reminiscent of the old candy apple red" back in the day chroma base , dust the metallic " no tiger stripe , lite first candy coat , flash" slightly wetter 2nd ,for coverage , the same for the third where some will hammer it" the same for 2,3 coats of clear" last coat wet" looks so good " no wet sand / buff when lucky non customer cars , ( whole sale rides ) no lumpy metallic, definitely have to take your time and finesse that color " great job " rad guns help to make all the difference and a good booth and lighting love to do my tacoma instead of Barcelona
i do the same but surprised you didnt blend into the near side wing (fender ) as the bumper touches that panel so colour will be different
Wow dude, real diamond 😲👌
Thank you! 🤘
Really good information & video ✌️
Where can I get the paints needed to spray this on a guitar? Looks gorgeous!
So this was my next video after the air compressor video. Again good job and you can paint lol
Haha thank you! I try my best!
I just sprayed GMC version of the same color and it's tricky but if you have enough room for the two coats if mid it blends good, But was in a panic when I put the first coat of base and thought it was the wrong color.
Yes it can definitely mess with you when you first put the base down!!
What a great looking job! I love these multicolor paints but apparently they can be a pain to work with.
I have a 2017 Miata MX-5 with paint code 41V as listed on the door sticker.
I have a couple of small dings, scratches and chips I'm looking to touch up, but definitely don't need to spray the whole thing again.
Every review or info I have about 41V touch up paints or kits say they all suck. Seriously, I've yet to find anything helpful for info and I fear I just have to drive around with these dings and scratches forever....
Any suggestions on how to do a Touch Up for a Soul Red Tricoat 41V paint?
Thank you for watching! And as far as touch ups go I don’t recommend doing it. I would go to a reputable body shop near you and ask them for an estimate on fixing your paint!
Awesome video man! I really enjoy watching your videos man! Keep up the great work.
Thank you!!!
@@Eric_Kinser hi bro really good stuff you did an amazing job. Bro what GoPro are you using what are you camera settings and what edit app do you use
Hey thank you!! I appreciate that. I use the go pro hero 7, nothing fancy! And I use an editor on my iPhone called video shop!
Resnik Refinishing You’re welcome! As someone that’s been painting for only a couple of years would you mind doing some videos on color matching? I would like to see and learn more from others!
@@Eric_Kinser thanks for the response brotha. When you import your footage from go pro to your iPhone how do you do it ? Do you use the GoPro app to download everything to the app and then to your iphone or do you use sd card adapter to import everything to your iPhone to not lose quality? How do you do it bro .tia
Hi ti si the thirst time that I paint 41v thanks for jour vidio it will help me alot will a welcome x lite do gob for 41v
Another sweet video
Thank you 🙏
Your gun control is very impressive
It's a lot of work to do this finish right but there's no better red on ANY production vehicle in the modern age unless you're talking about supercars costing 400,000 dollars or more before customizations.
Amazing job. What paint company do recommend for this mazda 41v?
Yes man great video I got a whole side to do in 90line 46v three coats of mid matches perfect are you using 928-210 for clear??
Yes I used 210!
Hi, would you answer a question please? I am going to do a full respray on the panels of a Spy Racing quad, would a bright aluminium base coat make any difference to the final color instead of using a grey base coat please? Thanks.
What kind of antistatic gun is that? Great video!
Pro stat from pro spot welding!
I am having a bit of a problem with this paint. I am trying to fix a small dent in the front bumper. When I spay it on it comes out so light you can't see it and when I finally get enough paint on the bumper it looks almost black. I am using a small airbrush to apply the paint. Do I need a larger gun? or is there something else I am missing?
What's the difference between a sealer and a primer? Do you refer to the same thing in the video?
Sealer can be painted over primer u gotta sand it down. Also sealer is good for these Tri coats as u don't want bleed through
What paint line are you using? I like the candy being in a transparent base rather than a tinted clear.
Glasurit 90 line!
Nice job Man,what brand is the antistatic gun?
It’s is made my Ionstar, a European company! You can purchase it though pro spot welding if you are in the us though!
How does that walcom gun compare to the sata 5500 ?
It doesn’t! I like the 5500, but the walcom atomizes so much better and uses less materials!
Resnik Refinishing oh really ? See I use a 5500 with the O style 1.3 tip for clear . I find that it get more material on the panel . But I’m drawn to these malcom guns a lot and I’m wanted to pull the trigger on one .
model clear coat?
What kind of primer are you using, is that non sanding primer. Thanks
It was a sealer, it’s non sanding!
Good
👍👍👍
What variant did you use in glasurit ?
Standard formula!
What clears are you using in 90line Iam using 928 210