How to fix the Logitech MX Master 2s cursor not moving | Easy fix for frozen cursor

How to fix the Logitech MX Master 2s cursor frozen issue, Easy Fix
How to make a USB A to USB C converter | this video will help to convert any USB type A to USB type C
• How to make USB A to U...

[@xNYRVx]

At first, I was skeptical that it could be this easy. Thanks for saving my mouse!

[@SithisXVII]

same

[@pamelakennedy2923]

I love this mouse. As a Graphic Designer, it is my main tool, and when it stopped working, I almost cried. I'm not very techy or mechanical, BUT with your help, I fixed my beloved mouse. THANK YOU!!!!!! 🥳🥳🥳

[@danielrowett5692]

Thanks!!! This fixed my issue.
Investigating after the fact, there is an alternative way to fix this if you don't want to risk taking the mouse apart.
You can open the "Logitech Options" software and set the "Gesture Button" action to "None". This disables the button, allowing the mouse to start working again even if the button is still stuck.

[@diyeasy_in]

Thanks for the update. This will handy for somebody 🫡

[@jeanbon5282]

I tried to hit my mouse against the desk, until I found out your video. It works far better !

[@RonYates1]

Thanks!! I had to swing by walmart to get a precision screwdriver kit for the top 2 screws, but your video showed the exact resolution for my mouse. Thanks!!

[@johnleivas8028]

Thanks. Fixed mine in less than 5 mins! Easy straightforward video!

[@anthonyclements6064]

Great Fix! This was exactly what my mouse needed, thanks a lot!

[@SithisXVII]

Thanks for helping me fix mine, have had it for a little over a couple years and it's been one of the best mice I recall using

[@TheLotanos]

Amazing! I needed to find a torx screwdriver for the upper screws, but your solution worked like a charm. Thank you!

[@abateditheleme9702]

I managed with the smallest watch screwdriver I had, with some fatigue :)

[@MisterMarcusSykes]

So nice, I have 2 of these since years and both have the same problem. Normally pressing the side hard unjammed the button, but the cursor stopped completely. Thankfully this hopefully gave my favourite mice a few more years!

[@aidanpattinson5998]

This fixed it for me!

[@GordonFreeman951]

same here ! 2 master 2s and they unjammed the thump button... logitec why ??!!!

[@OysterTran]

I tried this and the problem happens again after a few months of use. This mouse is my a complete trash.

[@RC-SATX]

YOU ARE THE BEST! THANK YOU! I love my MX2 and can't live without it. I was about to throw it out and go on Amazon but your video solved my problem!

[@TreyCamp]

Same! Haha stoaked to save it from the landfill

[@guillermocastillo3711]

Worked perfectly! If you are in a hurry you can try to unstick the stuck button by giving some strokes to the mouse from the bottom up. Will open it and fix it definitely later.

[@caiodeleffrate]

Thanks so much. His video saved my work day. For me, it was enough to turn only the top screw, and it worked.

[@aaroncastillo6509]

Thank you!! I also have 2 of these mice and was getting so frustrated that my work one stopped working. This fixed my issue

[@alokgupta2k]

Thank you! it worked very well. Two screws (small) needed different small screwdriver.

[@theComput3rNerd]

Thank you so much, I thought I'd have to return it but because of your video its fixed!

[@TreyCamp]

Wow. This was it. Totally fixed it. Just loosened it back ~ .75 turns for each of the (2x) screws and that was good enough for me to feel a good clicking.
I've had this mouse for almost 5 years now, and the past year it has started to have these symptoms past year or so. today became completely unusable. Should have noticed that the thumb button was getting harder to press (and stuck now of course). Now my mouse is smooth as it was when it was new, no lagging. Perfect! (at least for now)
Will update if anything changes, saved me from buying a new mouse! Thanks.

[@onury.2741]

My hero of the day! Just was about to buy a new one, but said I am going to try to fix this and found your vide. Thanks!

[@sebastienleclerc8772]

Some tips after fixing 2 mouses:
- Tools : Phillips 0 (PH0) and Torx 5 (T5) screwdrivers. Thin blade.
- Do not fully remove the non-stick pads: lift both sides of the pads just enough to get to the screws (this way you won't damage the pad so much).
- Do not disconnect the ribbon. The fix is perfectly doable with both parts of the mouse still linked by the ribbon.

[@nkmmy]

Thank you very much! it worked! I thought i have to waste money for such expensive mouse after 2 years. Appreciate the sharing!

[@ElsmoreHomes]

Thank you, just fixed my MX master with your video!

[@0815DST]

THANK YOU! I never thought that this would really help.🙂

[@rayanthonymadrona988]

Absolutely worked like a charm. Thank you.

[@Gualaguala659]

Omg thank you thank you thank yo!!!
It took me 2 months of stress and only 2 min to fix it thanks to you!!!!

[@FavoritesAG]

Thanks, that was exactly the issue for me. Some notes: a very flat screw driver can work on the star screws at the top (NOT thank you Logitech) and to be careful when removing the white locking mechanism.

[@ELITExPWNAGE]

Big ups my man, this is what was causing the issue for me!

[@13didos]

You are a day saver! 🖤 Keep on!

[@reincarnated3d]

I was about to throw my mouse thinking it was done. Thank you you saved me some money!

[@user-tl6kh1od9g]

Superb, worked a treat! I was about to spend £100 on a new Master MX :)

[@ramsesdelr]

You're a lifesaver, this worked perfectly, thanks a lot!

[@amirshahar3733]

Very detailed and professional, thank you.

[@BrianPelc]

Wow! You just saved me a good chunk of cash! Thanks so much!

[@radhey0123]

Helped me lot. thank you!

[@bcchan9122]

You the best!!! You saved me $100. Thank you so much!!🥰

[@AnanasDataDriven]

Great video!!! Exactly solved my problem. thanks a lot

[@JaganGanti]

Thanks for making this video. exact issue in my mx 2. Instead of opening, I clicked that thumb button properly few times and I think it goes unlocked from the pressed state. The mouse is working fine now.

[@davidfox974]

Thank you very much, excellent work my friend

[@bheemprakash7293]

Thanks a ton. This video helped me resolve my issue.

[@mohnishsapra2247]

Thanks Man! Just fixed it. Super easy.

[@ToddDouglas1]

Worked for me just now! Saved me from buying a nee one! Thanks!

[@volkanilhan2170]

It definitely solved my problem. Thank you very much

[@Bajumahendra]

Thank you. It works. Money were saved🎉

[@Paul70747]

What a great solution!!! it works 100%. Thank you very much

[@adalbertoantopia1441]

Exactly as described. I could fix my mouse and it works perfectly again. Thanks!

[@Jonasdahljeppesen]

Thank you. Just a heads up. For me it was enough to loosen the 2 screws underneath the thumb button, without actually taking apart the mouse.

[@royhonders]

Yes

[@ashfaqanshad5462]

Worked like a charm!❤

[@jeffrey8859]

Great, saved me purchasing a new mouse. Many thanks

[@My_Legs_Are_OK]

Thank you. I didn't have to disassemble it, just whacked it a few times against my palm, it must have loosened the button and it got better. Not the most elegant solution, but it sure was quick :)

[@jacobdonahoe7407]

very nicely done; thank you!

[@faisalgrafi3346]

Thanks this videos very helpful

[@jezreelfilms]

Thank you for this! Quick question what kind of allen key did you use?

[@mQumboz]

This solved my problem! huge thanks.
however, many years later this problem came again, tried the same approach, even tried to lift the pcb so far and fixed it with some silicon glue.
in the end, i just ripped off the button (not really I just removed the button mechanism from under the pad. useless button and causes a lot of problems.
This mouse has served me for more than 6 years, I'm not complaining.

[@joaovictoroliveiracosta5560]

This really saved me. Thx a million

[@ngeshlew]

Thank you! It worked! Also had to buy a tool kit to get this done!

Amazing video. Helped me a lot.

[@thibaultwalter9165]

It works, I dont have to buy a new mouse thanks a lot !!!

[@shreekantnalawade.4707]

Thank you so much. It's working properly

[@ThilinaDinithFonseka]

Thanks it saves my mouse ! great video 🎉

[@yassinemagri6555]

thank you! i was about to buy another one :)

[@SamMasghati]

i have the same problem and will try this asap. had this mouse for 2 years and didnt know there was a button tbh

[@clivedias4675]

Worked for me... Thanks a lot...

[@davekeebakseng]

Amazing !!! The trick really works !!!

[@ranulfocastillo5355]

Thanks for your help!

[@AliEmad-0x]

Thinks a lot , it worked , big love

[@kesimesi]

thx for the fix - saved my mx master

[@LifeIsACurse]

worked for me and did the trick.. thought the latest windows update which just got installed on it's own was the culprit.
never used that side-button, so i was a bit dumbfounded how it caused my dilemma...
thanks again :)

[@mellontrainingtutorials]

Great fix thanks a lot!

[@cristicristi150]

Works great now !!! Thanks

[@FrancoisvanJaarsveldd]

Works like a dream. Thanks !

[@Hugh-zq1mv]

thanks so much, this totally fixed my mouse

[@ahmedsaeed5149]

Thank you sir. you save my day THANK YOU!!!!

[@abateditheleme9702]

It worked. Thanks a lot.

[@DJOrangeJoe]

Nice, this fixed my mouse.

[@pierrea.bordonne8326]

le tuto est très clair, merci !
il ne me manque que le tournevis torx , j'ai donc sacrifié la touche du pouce (que je n'ai jamais utilisé) et ma souris est opérationnelle .

[@Brandonhung95]

Thank you! This worked perfectly!!

[@diyeasy_in]

You're welcome!

[@marcusmuretic199]

did the trick!! Thank you!!

[@prashantshukla3652]

Thanks so much! It worked!

[@nvrpnc]

Thanks, that was also the issue my mouse had.

[@yuewang5159]

A BIG Thanks!

[@lukasmisko8906]

It works! Thanks man

[@cahamilton]

Fantastic, thanks for this! Just saved me from buying a new mouse!

[@alexio98COD]

Thanks a lot!

[@oluwatomisinpauls.9899]

God bless you, I just fixed it...

[@jhumelquides540]

Mine is working now! Thanks!!

[@UchiRahmadi]

Great tutor thanks its work..

[@lxdgr3t]

Thank you for this video!

[@a20061005]

Thank you! Saves my mouse 🙌

[@rodrigolozanolucianez37]

gratefull for this!! I was already losing hope

[@paweprusakiewicz7813]

Great tutorial. You saved my mouse and a few coins in my wallet.❤❤❤

[@venugopalakrishnasoyam7922]

Thanks it worked for me

[@iiralfyii]

can you simply disable the gestures or the buttonm if you dont use uit? I have no way of opening the mouse

[@ilpoveropiero]

you saved my day! thanks!

[@RichardCash-lr7yz]

awesome, it works on my mouse, thank you :)

[@vdlycos]

It sounds so stupid, but it is honestly true that this fixed my mouse as well... The point "carefully remove the bottom stickers" though isn't quite that easy.

[@alfonsoportals7568]

Thanks a lot!!!! it works!🤗🤗🤗🤗🤗🤗🤗

[@BenDalorian]

THX ! Saved 100 Euro 👍

[@freagul]

My mouse stopped working right in the middle of a project and it was driving me insane. Thank you so much.

[@diyeasy_in]

Glad it helped!

[@ibanfernandez4705]

kudos, it solved my issue

[@wilhflashito8713]

thanks a lot u saved my mouse

[@A00706187]

Thanks buddy, you got it 👍