@ Desing Experts Thanks for the video. Revit -PHE &FP Interview Questions at Atkins Bangalore Walking as given below. 1. What are the drainge pipe materials.? Answer: CPVC,UPVC,HDPE. 2. what is EWC? Answer: Europian water closet. 3. What is the slop used in the drainge pipes? Answer:upto 82 dia 1:80 slop and 110 dia to 160 dia 1:100 slop. 4.what is the sprinker coverage? Answer: Sprinkler heads generally form a 12m² area of coverage unless otherwise dictated by the hazard classification of the building and the risk being protected. 5. How much area sprinkler can cover? Answer: Pendent and upright sprinklers have 12- to 20-foot (3.7 to 6.1-meter) maximum spacing, depending on unobstructed vs. obstructed construction types and the specified protection area of 144 ft2 (12 m2) to 400 ft2 (37 m2). 6. How many types of sprinklers are there? Answer: pendent, upright, sidewall, or concealed. 7.Expain what type of sprinkler used in ceiling and without ceiling areas and why? Answer: upright sprinklers in areas without finished ceilings and pendent sprinklers in areas with finished ceilings. There are also recessed pendent and concealed pendent sprinklers. An upright sprinkler sprays water upward-and both upright and pendent sprinklers have coverage to each side within a specified coverage area. 8. Where we use side wall sprinklers? Answer: Ner Ramps 9.What are the fire Hazard? Answer; The sprinkler are selected based on the claassification of hazards there are 3 type of Hazards. 1. Light Hazard. 2.Ordinary Hazard. 3.Extra Hazard. If you think there is other type of answers reply below. Follow my channel as well am planing to teach Plumbing desing and Fire Protection design. Hope this helps you to clear your interview at some point. Good day.
arey bhai ye modeling koi badi cheez nahi hai jisko dekho wahi simple vedio bana ke dal deta hai,..shop drawing bnao annotation system btao ye sab kaam ki cheez hai , sirf modeling se kuchh nhi hota...waise jaiye aap ki bhais bol rahi hai chara ke liye
@ Desing Experts Thanks for the video.
Revit -PHE &FP Interview Questions at Atkins Bangalore Walking as given below.
1. What are the drainge pipe materials.?
Answer: CPVC,UPVC,HDPE.
2. what is EWC?
Answer: Europian water closet.
3. What is the slop used in the drainge pipes?
Answer:upto 82 dia 1:80 slop and 110 dia to 160 dia 1:100 slop.
4.what is the sprinker coverage?
Answer: Sprinkler heads generally form a 12m² area of coverage unless otherwise dictated by the hazard classification of the building and the risk being protected.
5. How much area sprinkler can cover?
Answer: Pendent and upright sprinklers have 12- to 20-foot (3.7 to 6.1-meter) maximum spacing, depending on unobstructed vs. obstructed construction types and the specified protection area of 144 ft2 (12 m2) to 400 ft2 (37 m2).
6. How many types of sprinklers are there?
Answer: pendent, upright, sidewall, or concealed.
7.Expain what type of sprinkler used in ceiling and without ceiling areas and why?
Answer: upright sprinklers in areas without finished ceilings and pendent sprinklers in areas with finished ceilings. There are also recessed pendent and concealed pendent sprinklers. An upright sprinkler sprays water upward-and both upright and pendent sprinklers have coverage to each side within a specified coverage area.
8. Where we use side wall sprinklers?
Answer: Ner Ramps
9.What are the fire Hazard?
Answer; The sprinkler are selected based on the claassification of hazards there are 3 type of Hazards.
1. Light Hazard.
2.Ordinary Hazard.
3.Extra Hazard.
If you think there is other type of answers reply below.
Follow my channel as well am planing to teach Plumbing desing and Fire Protection design.
Hope this helps you to clear your interview at some point. Good day.
what happened to sloping the pipes, they never run in straight line.
Yes the Drainage Pipe is sloped @ 1%
Hau gote khusi au
waiting for next video
Soon Will Upload the next Vedio
Thanks for ur Support
Good
Thanks
Will you cover complete Revit MEP
yes
Please upload next continuous video
ua-cam.com/video/RvGLOuhGGUI/v-deo.html
Sir please make lecture more
ok i will
Sir why you slope off
arey bhai ye modeling koi badi cheez nahi hai jisko dekho wahi simple vedio bana ke dal deta hai,..shop drawing bnao annotation system btao ye sab kaam ki cheez hai , sirf modeling se kuchh nhi hota...waise jaiye aap ki bhais bol rahi hai chara ke liye
Can you give me your pipe fitting families?
Hindi m tutorials banawo
ok Brother
many things are wrong bro.
False connections