Це відео не доступне.
Перепрошуємо.

How to change Rear Springs on HYUNDAI SANTA FÉ CM TUTORIAL | AUTODOC

Поділитися
Вставка
  • Опубліковано 19 лис 2016
  • How to change Rear Springs / Rear Coil Springs / Rear Suspension Springs on HYUNDAI SANTA FÉ CM TUTORIAL | AUTODOC
    Top brands that produce Springs: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
    📲 Buying via app is always cheaper than on the website!
    ❱❱ Install the AutoDoc App - interstitials....
    On our website you will find a wide range of auto parts you are interested in: goo.gl/UbP8tM
    Springs: goo.gl/oL5QgN
    Springs for HYUNDAI : goo.gl/eUd6Fv
    Springs for HYUNDAI SANTA FÉ CM: goo.gl/afLzc7
    HYUNDAI Car parts: goo.gl/7J141i
    Mobile Shop: m.autodoc.co.uk
    ► How to replace engine air filter on HYUNDAI SANTA FÉ CM - • How to change Air Filt...
    ► How to replace front wheel bearing on HYUNDAI SANTA FÉ CM - • How to change Front wh...
    ► How to replace front lower arm on HYUNDAI SANTA FÉ CM - • How to change front lo...
    📢 AutoDoc in social media:
    Facebook: / autodoc.co.uk
    Twitter: / autodoc_berlin
    UA-cam: / autodocuk
    Instagram: / autodoc_autoparts
    #autodoc #autodoctutorial
    Disclaimer:
    This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
    ⚡ AUTODOC CLUB - club.autodoc.c...
    Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
    ❱❱ Install the AUTODOC CLUB App - club.onelink.m...

КОМЕНТАРІ • 21

  • @ericb7203
    @ericb7203 Рік тому +2

    Isn't there a bump stop that goes inside the coil spring? When I was working on end links, I saw what looked like remenents of a bump stop lodged in the middle of the coil spring loosely setting on the bottom.

  • @adrianparada5950
    @adrianparada5950 7 років тому +1

    is it the same procedure on 2003-2006 kia sorento?

  • @Mm01233
    @Mm01233 2 роки тому

    I have sorento and exactly the same design, I feel rough and harsh ride it has new shocks, foes the coil spring do that or what else can do that I feel uncomfortable when I ride the vehicle

    • @autodocuk
      @autodocuk  2 роки тому

      It depends on the data of your vehicle.
      AUTODOC

  • @Bpjames
    @Bpjames 5 років тому

    So if I were to do this at home, I would need two jacks - one to lift the car and one to compress the spring to remove the bolt?

    • @autodocuk
      @autodocuk  5 років тому +3

      Thank you for your feedback! We do not recommend that you leave your car hang on the jack. Please, use the special car supports, after this we will be able to use the same jack to press the spring. Best regards, Autodoc.

  • @MelvinMechanicalEngg
    @MelvinMechanicalEngg 3 роки тому

    Are the spring same for both sides?
    I mean right side spring and left side spring are same?

    • @autodocuk
      @autodocuk  3 роки тому

      The springs are the same per axle.
      replacing them with each other is also the same.
      The springs are different between the front axle and the rear axle.

    • @MelvinMechanicalEngg
      @MelvinMechanicalEngg 3 роки тому

      @@autodocuk Wow. Thanks for the quick reply.
      I changed 1 of my rear springs(bought used spring). After that Im experiencing rolling. What cud be the cause? Is there a sway bar on the rear side for 2012 hyundai elantra?

  • @iacobvlad9486
    @iacobvlad9486 4 роки тому

    For Santa Fe (CM) KYB Code 3440028 or 341716 is compatibile for? (i order 3440028 but the collar of the upper case is smaller than original one)

    • @autodocuk
      @autodocuk  4 роки тому

      Thank you for your comment!
      We highly recommend that you contact our Customer Support agents and you will get advice on which car parts you need to obtain and answer all your questions regarding your order.
      We look forward to hearing from you!
      Best regards,
      Autodoc team!

  • @originaloffical
    @originaloffical 3 роки тому

    Anyone have the Torque Specs for the Lower Control Arm bolt?

    • @autodocuk
      @autodocuk  3 роки тому

      You can find out all the regulatory values of the tightening torques in the technical documentation for your car.
      AUTODOC

    • @originaloffical
      @originaloffical 3 роки тому +1

      @@autodocuk Found it here: www.hyundai-forums.com/threads/suspension-torque-specs.643783/

  • @craigfam7054
    @craigfam7054 4 роки тому

    How much different is this than a 2011 Sorento?

    • @autodocuk
      @autodocuk  4 роки тому +1

      Thank you for your comment.
      In general, the replacement will be similar, the only thing that may differ slightly in the design features of your car.
      Best Regards,
      Autodoc team

    • @craigfam7054
      @craigfam7054 4 роки тому

      @@autodocuk thank you. Do you see coils slipping much when compressing them to put the control arm bolt back on?

  • @motube2389
    @motube2389 6 років тому +1

    Not sure if the job would go that easy, the lower mounting will be stuck as hell

    • @autodocuk
      @autodocuk  6 років тому +1

      Thank you for the feedback! This video is considered to be an informative one, and it shows the sequence of repairs, so some stages of the repairs might have been excluded. Best regards, Autodoc.

  • @JSmith-wy3yh
    @JSmith-wy3yh 5 років тому

    No Safety glasses?

    • @autodocuk
      @autodocuk  5 років тому

      Thank you for your feedback! We have already corrected this mistake, and in our new videos you will see our mechanic in protective glasses. Best regards, Autodoc.