If you can afford a metal lathe, wood lathe, Oscillating cutting tool, router, drills, etc... then I think you can afford a table top belt sander...instead of taking 10 hours to build one...LOL
I'm watching you make a unique tool but have no idea what it is while you're doing it. I'd appreciate a little starting flash of it in use before the how to part of the video begins. But hey, that's just me! I'm still watching 6:41 minutes into it. 53:59 is a stretch without knowing what it is. 👍🏻🇺🇸
Ppersonally I enjoy every single step you take and enjoy watching you do it. For those who seem to think it is too long or unnecessary to show so much, ...FFW. Also to those of you who want to see what it is going to be first, read the part where you have taken the time to write what it is and exlpain it! I think you are very creative and talented and I thank you!!!
i love your ideas Sir i have many tools lying around that with your ideas i can make handy tools without spending a lot of money especially want to make a timber planer /thickneser using even a washing machine motor i just have to resource an old electric planer to get the cutter mechanism I have found the hand electric planers to break the rubber drive belts your idea also makes them stronger to use with various timbers was your planner hard to do ???? thanks for sharing your ideas
lots of fun to watch. i esp like the way you make each tool so you have it to work on making the next tool. also like the bought tools you have, and the dexterity with which you use them. you are a guy who knows how to have fun. and a man of few words. a few more dimensions please. so where do you get those nice motors and lathes?
hello, I am a mirror maker by profession and I assure you that you are not using this glass cutter correctly, you should never go over the cut again and preferably not to miss or miss because irrecoverable, please! lubricate your glass cutter with white spirit or diesel
My question why after you see the tools they have to work with do they still choose the most jacked up way to do things. #3 he takes the v pully to his lathe and spends forever turning away most of it why not just saw off from bottom of V then face off in lathe also on the pully turned in to faceplate why drill all those holes with hand drill when we just saw you use your drill press did you forget you had that. I guess if you are going to make useless crap you should make it the hardest way you can find.
Terry Allemann, "...I guess if you.are going to make useless crap you should make it the hardest way you can..." Said your parents about you on your 18th birthday.
You would have been better off having a bucket of hot water and a bucket of cold water and just dipped the bottles in each as needed. Also why epoxy glue the old motor pulley onto the shaft when it had a perfectly good Woodruff key for this purpose?
ONE wrench is a DOUBLE ENDED MULTIFUNCTION UNIVERSAL WRENCH and the other is a multifunction magic wrench. they are on Amazon under universal wrench set.
Bonjour, Tu as fait une erreur en numérotant tes lignes de références, tu as mis 2 fois le chiffre 17. As-tu d'autres gabarits, modèle et/ou plans ? :Free Template for A4 Format Merci pour ta très prochaine réponse; Salutations distinguées. Maurice BOQUILLON du 599191 ( Nord de la France )
30 minutes in I can't take any more excitement, why go to all this trouble when there are easier ways to do these jobs, the one bright spot was when the battery failed and stopped filming
Gee... could have cut that motor pulley in half with that hacksaw you have, then faced the remaining stub, instead of painstakingly, a fraction of a millimeter at a time, cutting away the entire outer shoulder then the base of the "groove", and then most of the inner shoulder. Seemed like a lot longer than the almost 3 minutes watching this. And of course, since the video was playing at high speed, it was for you. Why drag it out like that?
Мастер на букву рж..ый россияне меня поймут столько возни а пузырь можно было ниткой отрезать и быстрее и лучше одни понты иноземные типа какой инстумент крутой да всё лишнее всегда удаляется напильником иначе самолёт получится глупцы
ето что милион дураков посмотрели? 1000000 часов ето примерно 125 000 рабочих дней или 5680 рабочих месецяв или 437 рабочих годов . Значит 200 ДВЕСТИ ЧЕЛОВЕКА СОБРАЛИ ПЕНСИОННИЙ ВОЗРАСТ.... СОВСЕМ ЧОКНУЛИС?
this video could have been about a quarter of the length. We dont need to see every last frame of construction...we can extrapolate, skip some of repetitive details
Jay Bushman, not everyone is a Master Class Woodworker like you, not a Master Class Theories of Teaching, and not a Master Class Storytelling Via the Video Medium. You, sir, are a true Renaissance Man. I'm pumped to check out your channel! WHUTSITCALLED?!!
Complètement ridicule; et que fric dépenser pour cette réalisation en plus du temps perdu . VRAIMENT NUL. AVEZ-VOUS MIEUX EN CONNERIE ? J'ai construit ma maison seul avec ma femme, (180 m2 au sol, 3 niveaux), cela nous a pris 5 ans) donc je sais de quoi je parle. JE SUIS VRAIMENT, MAIS VRAIMENT DÉÇU DE voir ce reportage. TÀCHER DE TROUVER NETTEMENT MIEUX à diffuser. Cordialement, Victor.
Copycat channel! I bought this bottle cutter from Lazada, all the same, screws and nuts. Only difference is mine is plastic instead of wood. Few dollars only!
Truly, I get the fun, pride and creativity. Very sweet, but $60 at Harbor Freight tools.
What do you have
Yeah but harbor freight sucks
@@davidpayne4315 That's true for some of their stuff, but you can also find some quality tools at bargain basement prices.
МОЛОДЕЦ ПРОСТО И СЕРДИТО ТАК ДЕРЖАТЬ
Show de perfeição profissional
Клас
Mucha herramienta pero poco hábil amigo ..... parecía más bien ,que querías enseñar tus herramientas
Nice presentation good job 👍 👏
If you can afford a metal lathe, wood lathe, Oscillating cutting tool, router, drills, etc... then I think you can afford a table top belt sander...instead of taking 10 hours to build one...LOL
..PAAAAAAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA..nice Prank!
I'm watching you make a unique tool but have no idea what it is while you're doing it. I'd appreciate a little starting flash of it in use before the how to part of the video begins. But hey, that's just me! I'm still watching 6:41 minutes into it. 53:59 is a stretch without knowing what it is. 👍🏻🇺🇸
I usually jump to the end. All I need to see is the end product. Not all the steps to get there.
Ppersonally I enjoy every single step you take and enjoy watching you do it. For those who seem to think it is too long or unnecessary to show so much, ...FFW. Also to those of you who want to see what it is going to be first, read the part where you have taken the time to write what it is and exlpain it! I think you are very creative and talented and I thank you!!!
Bravissimo!
Okay, in #3 you were really showing off a plethora of skills especially rewiring the motor with an on/off switch. Amazing! 👍🏻🇺🇸😉
Naakt vrouw
А Вам не вспоминается при этом печальная история Красной Шапочки в исполнении М.Галкина? )))
Very nice!
Got to Love the Don't try this at home warning right in to first shot available templates love the video
Have you heard of demands???
@@HandmadeCreativeChannel ?
Awesome !
Legjobb
А клей "момент" Советский !!! СССР Живой юридически . Устав ООН ГЛАВА 5 СТАТЬЯ 23
💙💛💪
бумажные шаблоны проще клеить glue stick
👍Echt klasse Gemacht Daumen hoch 👏👀😁😎
Good one thanks
il faut ramplire la bouteille d'eau chaude
3 Awesome Wooden Machines You Can Make Yourself -> Please Don´t try this at Home :D :D :D
UA-cam rules my friend.. When you work whith dangerous tools 🙂
... молодец парень!-, что ещё можно указать то, отличный получился гриндер!!!
коммунисти ви лучшие во фсьои., 3 кв мотор на гриндер, процветания вам єкономического желаю
Mate, when you did the lathe cutting, I fell asleep.
Man! you always come with new idea and project. Enjoyed you post.. Keep it up👍
Hi
@@luigicorbo6045 Hi there.
i love your ideas Sir
i have many tools lying around that with your ideas i can make handy tools without spending a lot of money especially want to make a timber planer /thickneser using even a washing machine motor i just have to resource an old electric planer to get the cutter mechanism
I have found the hand electric planers to break the rubber drive belts your idea also makes them stronger to use with various timbers
was your planner hard to do ????
thanks for sharing your ideas
Да инструменты показаны - неплохие и много , а здравого смысла - чуть ! В интернете есть и более простые и более функциональные варианты !
Great project
A bit of voice over would help!!!
No. 1 = acceptable, but the cooling / heating process has room for improvement
No. 2 = OK!
No. 3 = Crap
Genio 👍🏻👏🏻👏🏻👏🏻
Very nice Bro🤝
Thanks bro 👌
lots of fun to watch. i esp like the way you make each tool so you have it to work on making the next tool. also like the bought tools you have, and the dexterity with which you use them. you are a guy who knows how to have fun. and a man of few words. a few more dimensions please. so where do you get those nice motors and lathes?
hello, I am a mirror maker by profession and I assure you that you are not using this glass cutter correctly, you should never go over the cut again and preferably not to miss or miss because irrecoverable, please! lubricate your glass cutter with white spirit or diesel
Okay, bottle cutter is a cool tool to have. What's next?
Oh boy, I bet you can pay your head and rub your belly at the same time too! Smooth action on the two lathe cranks at the same time. 👍🏻🇺🇸
А с техникой безопасностью всё так-же как и в России.
42:18 before doing anything fancy, buy yourself at least a simple hand saw
Interesting belt sander. Way too far to go to me. An unused electric drill would be a more likely motor for many viewers to use (me too).
Ótimo vídeo Parabéns 👍
И круг притирочный чугунный
Es un tutorial demasiado largo , se hace difícil de ver , con los anuncios casi dura una hora , no juntes los proyectos , gracias por compartir
Я твой дом труба шатал, вот это самоделка
The wood changed from ply wood to MDF? Then back to ply wood?
great work but you need to invest in a couple of clamps to hold your vice and the sanding belt tool to the bench so they don't move around!
Seems like you have to have a workshop with multiple tools JUST to start with...But a very good video nonetheless !!!!
See if
@@andreibaraviera6158 üüüüüüüü
No grau 👌
Strasan majstor😢
My question why after you see the tools they have to work with do they still choose the most jacked up way to do things. #3 he takes the v pully to his lathe and spends forever turning away most of it why not just saw off from bottom of V then face off in lathe also on the pully turned in to faceplate why drill all those holes with hand drill when we just saw you use your drill press did you forget you had that. I guess if you are going to make useless crap you should make it the hardest way you can find.
Terry Allemann, "...I guess if you.are going to make useless crap you should make it the hardest way you can..."
Said your parents about you on your 18th birthday.
You could write in the video what you were going to make, before you started making it...
Die Flasche nur eine Runde drehen... in Plastikschüssel gießt man kein Heißwasser ...
Are you really satisfied all this headache to cut the bottles to cups and it is not perfect cut?
11 minutes to show how to make bottle etching device?
nice job :)
Really cool stuff but do you have to show us every little move you make? How about some editing to shorten your presentation, please.
You would have been better off having a bucket of hot water and a bucket of cold water and just dipped the bottles in each as needed. Also why epoxy glue the old motor pulley onto the shaft when it had a perfectly good Woodruff key for this purpose?
Vai entender cada maluco e sua mania
@@rogerioventura7336 in English?
Фен нужен?
I like how he did the whole my battery went dead stop recording right when he figured out he was pushing the router the wrong direction
I'll watch if you tell me what they are first.
What are the wrenches you use at 44:17 and 44:19 called? Would like to add those to my tools.
ONE wrench is a DOUBLE ENDED MULTIFUNCTION UNIVERSAL WRENCH and the other is a multifunction magic wrench. they are on Amazon under universal wrench set.
😅
Bonjour, Tu as fait une erreur en numérotant tes lignes de références, tu as mis 2 fois le chiffre 17.
As-tu d'autres gabarits, modèle et/ou plans ? :Free Template for A4 Format
Merci pour ta très prochaine réponse;
Salutations distinguées.
Maurice BOQUILLON du 599191 ( Nord de la France )
You have some brilliant ideas, would be awesome to watch if you paid a little more attention to detail, and made them look good.
Soon I'il be investing in a workshop and cameras soon. I have a lot of ideas and interesting ideas
Chris Rowley, he has an awesome to watch channel now. what is your channel called?
30 minutes in I can't take any more excitement, why go to all this trouble when there are easier ways to do these jobs, the one bright spot was when the battery failed and stopped filming
La posizione delle boccole filettate è errata andavano avvitate dalla parte sotto, così strappano
Gee... could have cut that motor pulley in half with that hacksaw you have, then faced the remaining stub, instead of painstakingly, a fraction of a millimeter at a time, cutting away the entire outer shoulder then the base of the "groove", and then most of the inner shoulder. Seemed like a lot longer than the almost 3 minutes watching this. And of course, since the video was playing at high speed, it was for you. Why drag it out like that?
traducir en Español 😅
ты сам понял что делаешь
"Mother in law having no wok shaving the home ".This project is like that.
Oh lord
tros long
Not watching the entire video before I see what’s built…
Tired of people making videos like that.
Not gonna happen
Too much detail and much, much too long.
Мастер на букву рж..ый россияне меня поймут столько возни а пузырь можно было ниткой отрезать и быстрее и лучше одни понты иноземные типа какой инстумент крутой да всё лишнее всегда удаляется напильником иначе самолёт получится глупцы
ето что милион дураков посмотрели? 1000000 часов ето примерно 125 000 рабочих дней или 5680 рабочих месецяв или 437 рабочих годов . Значит 200 ДВЕСТИ ЧЕЛОВЕКА СОБРАЛИ ПЕНСИОННИЙ ВОЗРАСТ.... СОВСЕМ ЧОКНУЛИС?
На
this video could have been about a quarter of the length. We dont need to see every last frame of construction...we can extrapolate, skip some of repetitive details
Jay Bushman, not everyone is a Master Class Woodworker like you, not a Master Class Theories of Teaching, and not a Master Class Storytelling Via the Video Medium. You, sir, are a true Renaissance Man. I'm pumped to check out your channel! WHUTSITCALLED?!!
Don’t try this at home then free links ???
Video too long.👎
Muito serviço para pouca coisa inútil
what a joke. ha ha
William Roberts What a a dim, idgit Tool. haha.
I was going to ask about your channel but... HAHAHAHAHAHAHA!!
THAT, Willy, is a joke.
Complètement ridicule; et que fric dépenser pour cette réalisation en plus du temps perdu . VRAIMENT NUL. AVEZ-VOUS MIEUX EN CONNERIE ?
J'ai construit ma maison seul avec ma femme, (180 m2 au sol, 3 niveaux), cela nous a pris 5 ans) donc je sais de quoi je parle.
JE SUIS VRAIMENT, MAIS VRAIMENT DÉÇU DE voir ce reportage.
TÀCHER DE TROUVER NETTEMENT MIEUX à diffuser.
Cordialement, Victor.
Copycat channel! I bought this bottle cutter from Lazada, all the same, screws and nuts. Only difference is mine is plastic instead of wood. Few dollars only!
Dr!ur
рукожоп! Реклама инструмента
My husband uses these plans from woodglut and is very happy with them. However. I love yours!