This brings back happy memories; aged 11-13 firing up diesel, and glowplug engines. I used to make my own diesel fuel by going to the local chemist, and buying a bottle of ether!, the chemist would ask what it was for, and then sell it to me. I would go home and mix it with paraffin and an oil (it could have been castor oil, I can’t remember after 50+yrs now). Can you imagine a young kid going into a chemist/pharmacist shop today asking to buy ether without either being laughed at, or perhaps the police being called?.
Great little engines. I had a Davis 1.5cc marine diesel, was always hard to start but was supplied with an exhaust manifold . It clamped around the barrel, I had two pieces of silicone hose attached with two exhaust outlets, one each side of the boat a Kielkraft Waverider. Wish I still had it.
Yours must be a Sabre, was it a marine with a water jacket? I had a Keift Kraft Seaqueen powered by a 3.5 cc FROG Marine with twin exhaust, I still have the engine and wish I still had the boat too.
@@mylittlediesels I may be wrong but I think it was a Spitfire marine diesel. It had a large brass water jacket and heavy brass flywheel. It was near impossible to start and only ever ran once. It was a long time ago now though I may have been doing something wrong..
Hi Again MR!! thanks to your videos about cox diesel i´m not afraid anymore! that is a GREAT way to get good diesel engines for low money!! my FF planes will love this as most of times we need just a little push and regular cox most of the time can be very Hot for FF use! i just order 2 heads and cranks this week!
Hello!! That's the spirit. I suspect if you don't push it too hard, the Surestart should hold without changing the crankshaft, that would make it even more economical to get a diesel. Thanks
I believe they are still available from Cox International. Can you get model diesel fuel where you are? If not, trying homebrew but you have to be able to buy diethyl ether, dangerous stuff!
@@mylittlediesels Yes - there are still available and with the heavy crankshaft installed as well and at a very reasonable price. As for fuel - I will make my own brew - thank God for John Deere fluid starter that is still available and cheap otherwise I would have to pay a fortune for a liter of di-ethyl-methyl ether .. thank you for your feedback - I truly enjoyed watching your videos today.
I haven't got the engine yet,but I'm going to make one completely from spare parts; it seems a quite essential engine,I might enjoy to assemble it from zero! I'm going to green anodize the head and spinner,leaving the golden crankchase,as the tail of my gyro will have a loezenge mimetic pattern on the tail;I wonder if the muffler does its job
I will,but actually I just realized that it will cost me almost two times an engine already assembled,this is an injustice,it should be more pricy an engine that's already assembled XvX
It depends, if it is avavilable in kit form then it is cheaper than an assembled one but if you are buying the components separately then it is more expensive. Why don't you get one from Cox Internatrional? Good luck. Bye.
Have you ever tried to run this engine with an 8x4 prop ? Just curious. I can already see this engine on a two-channel assisted, vintage free flight type of model ... Ohh yeaa ... can't beat that combination.
Is there any practical reason to turn it into a diesel? More power? Better fuel economy? Or just because! It appears you don’t need a glow plug. That’s a big plus. Also, is it straight diesel fuel? Like from the fuel station?
Hi, thank you for your interest. You have already listed all the practical reasons yourself ! For me, I just love model diesel engines, that's all, the smaller the better. The fuel is not the same as those used in motor vehicles because model diesel engines are not diesel engines as such. They can be loosely described as compression ignition engine similar to diesel engines, hence their name (they are in fact Homogeneous Charge Compression Ignition (HCCI), to be exact). Model diesel engine fuel consists of Ether, kerosene and Castor oil; the basic mixture has equal parts of the ingredients. To aid igniton, a cetane improver like Isopropyl Nitrate can be added, usually 2 to 3%. Well, that's what I was told when I started playing with model aeroplane engines many years ago.
I see that Davis offers a tool to tighten up the connecting rod / crankshaft connection on Cox engines. Have you found it necessary to do this, I wonder ? Love the sound of the dieseled Cox... suspect the neighbors will find it less objectionable than the glow version, which are kinda loud.
I'm new to diesel conversions, They sound so low compared to a normal .049, do you know what RPM range they run compared to a normal .049? Thanks for your videos, I really enjoy them.
Hi, I'm afraid I don't know as I don't have a tacho but diesels can swing a large prop at low speed, that's for sure. The Rev range of a glow Babe Bee 049 is 15,000 RPM typical, I think. A TD can easily achieve 25,000.
HELO my friend!! hope you are doing well! i good friend from RC groups send me a new DC Dart with the only rule to build and fly a plane for it. so, i´m working on an nice Cirrus Moth 31" wingspan, BUT engine has no papers. so i wonder if you know the right size and fuel mix for brake in this little? Cheers Rodrigo From Mexico!
Hello and greetings from UK!! Lucky you. I would always use Model Technics D1000 fuel for running in which is available here. It contains ether 35%, kerosene 35%, castor oil 28%, isopropyl nitrate 2%. I suppose you can either skip the IPN or use cetane additive.
This brings back happy memories; aged 11-13 firing up diesel, and glowplug engines. I used to make my own diesel fuel by going to the local chemist, and buying a bottle of ether!, the chemist would ask what it was for, and then sell it to me. I would go home and mix it with paraffin and an oil (it could have been castor oil, I can’t remember after 50+yrs now). Can you imagine a young kid going into a chemist/pharmacist shop today asking to buy ether without either being laughed at, or perhaps the police being called?.
Those were the days. The basic home-brew I used was 1:1:1 of ether : paraffin : castor oil. Looking back, weren't we lucky?
Great little engines.
I had a Davis 1.5cc marine diesel, was always hard to start but was supplied with an exhaust manifold . It clamped around the barrel, I had two pieces of silicone hose attached with two exhaust outlets, one each side of the boat a Kielkraft Waverider. Wish I still had it.
Yours must be a Sabre, was it a marine with a water jacket? I had a Keift Kraft Seaqueen powered by a 3.5 cc FROG Marine with twin exhaust, I still have the engine and wish I still had the boat too.
@@mylittlediesels I may be wrong but I think it was a Spitfire marine diesel. It had a large brass water jacket and heavy brass flywheel. It was near impossible to start and only ever ran once. It was a long time ago now though I may have been doing something wrong..
Can you remember what your fuel mixture was?Very cool build !
Hi Again MR!! thanks to your videos about cox diesel i´m not afraid anymore! that is a GREAT way to get good diesel engines for low money!! my FF planes will love this as most of times we need just a little push and regular cox most of the time can be very Hot for FF use!
i just order 2 heads and cranks this week!
Hello!! That's the spirit. I suspect if you don't push it too hard, the Surestart should hold without changing the crankshaft, that would make it even more economical to get a diesel.
Thanks
Ohhhh what a "beauty" ... and it "purrs" like a cat at the 2:10" of the video ... Will get one soon ... I love diesel engines !!!
I believe they are still available from Cox International. Can you get model diesel fuel where you are? If not, trying homebrew but you have to be able to buy diethyl ether, dangerous stuff!
@@mylittlediesels Yes - there are still available and with the heavy crankshaft installed as well and at a very reasonable price. As for fuel - I will make my own brew - thank God for John Deere fluid starter that is still available and cheap otherwise I would have to pay a fortune for a liter of di-ethyl-methyl ether .. thank you for your feedback - I truly enjoyed watching your videos today.
runs very nice
Thanks. Anxious to know if you have sorted out yous!
I'm making a small autogyro powered by a 0.49 Diesel,I pretty like your green diesel head,it's stylish
Thanks. How does your 049 diesel dehave?
I haven't got the engine yet,but I'm going to make one completely from spare parts;
it seems a quite essential engine,I might enjoy to assemble it from zero!
I'm going to green anodize the head and spinner,leaving the golden crankchase,as the tail of my gyro will have a loezenge mimetic pattern on the tail;I wonder if the muffler does its job
It would be nice if you could do a video to share.
I will,but actually I just realized that it will cost me almost two times an engine already assembled,this is an injustice,it should be more pricy an engine that's already assembled XvX
It depends, if it is avavilable in kit form then it is cheaper than an assembled one but if you are buying the components separately then it is more expensive.
Why don't you get one from Cox Internatrional?
Good luck.
Bye.
Have you ever tried to run this engine with an 8x4 prop ? Just curious. I can already see this engine on a two-channel assisted, vintage free flight type of model ... Ohh yeaa ... can't beat that combination.
Yes, in Part IV, it was music to the ears! Can imagine it in a WWI biplane. Thanks for your interest.
Is there any practical reason to turn it into a diesel? More power? Better fuel economy? Or just because! It appears you don’t need a glow plug. That’s a big plus. Also, is it straight diesel fuel? Like from the fuel station?
Hi, thank you for your interest. You have already listed all the practical reasons yourself ! For me, I just love model diesel engines, that's all, the smaller the better. The fuel is not the same as those used in motor vehicles because model diesel engines are not diesel engines as such. They can be loosely described as compression ignition engine similar to diesel engines, hence their name (they are in fact Homogeneous Charge Compression Ignition (HCCI), to be exact). Model diesel engine fuel consists of Ether, kerosene and Castor oil; the basic mixture has equal parts of the ingredients. To aid igniton, a cetane improver like Isopropyl Nitrate can be added, usually 2 to 3%. Well, that's what I was told when I started playing with model aeroplane engines many years ago.
I see that Davis offers a tool to tighten up the connecting rod / crankshaft connection on Cox engines. Have you found it necessary to do this, I wonder ? Love the sound of the dieseled Cox... suspect the neighbors will find it less objectionable than the glow version, which are kinda loud.
Hi, I only used a beefed-up crankshaft and I wasn't aware of a tightning tool. Not only the sound, the smell of diesel fuel is heaven.
The tool is for resetting the ball and socket connection on the piston end of the rod... Not for the big end of it.
@@davelowets Thanks
@@xzqzq 🍻
Has anyone tried to get an .049 diesel to run on premium gas mixed with 2 stroke oil?
I'm new to diesel conversions, They sound so low compared to a normal .049, do you know what RPM range they run compared to a normal .049? Thanks for your videos, I really enjoy them.
Hi, I'm afraid I don't know as I don't have a tacho but diesels can swing a large prop at low speed, that's for sure. The Rev range of a glow Babe Bee 049 is 15,000 RPM typical, I think. A TD can easily achieve 25,000.
@@mylittlediesels thanks!
They DO run at much lower revs than when running on Nitro, but they have much more torque on diesel, and can swing a larger prop at lower revs.
HELO my friend!! hope you are doing well! i good friend from RC groups send me a new DC Dart with the only rule to build and fly a plane for it. so, i´m working on an nice Cirrus Moth 31" wingspan, BUT engine has no papers. so i wonder if you know the right size and fuel mix for brake in this little? Cheers Rodrigo From Mexico!
Hello and greetings from UK!! Lucky you. I would always use Model Technics D1000 fuel for running in which is available here. It contains ether 35%, kerosene 35%, castor oil 28%, isopropyl nitrate 2%. I suppose you can either skip the IPN or use cetane additive.
donde conseguiste todas las piezas