I enjoyed your video. The slab is barely 4" above grade. Where I live (Louisiana) I have replaced many sheds built that way because the siding and frame rot due to ground moisture and water splashing up from the roof run-off.
This is why I watch this guy. Honest, straight forward and to the point plus I can afford these tools, methods and materials. Thank you. And yes I agree about just getting the timber delivered because you can choose a beautiful straight as aces piece of lumber in the yard but it'll be just as warped as any other when stored outside for a night.
I really appreciate the ACTUAL DIY aspect of these video's where a normal person with a normal set of tools can do it. So Many of these "DIY" video's explain how to build things and then proceed to use a bunch of custom tools that a lot of people don't have.
I’m building this right now and it’s working! I’ve not done any of these things prior. No pad pour, framing nothing. Mine has different dimensions than yours so I’m having my own adventure haha but it’s working and it’s fun! You’re such a great teacher. No step or scenario left unsaid. Thank you SO MUCH! I am definitely joining the VIP club 🤓😎
Seems good so far! Was easy to talk to about his My Shed Plans [Go Here=> *WoodBlueprints. Com* ]. Guided me in the right direction & helped me understand everything & in the end it was what I wanted
You do a good job at explaining why certain measurements or techniques are used rather than just telling what to do. That really helps when adapting techniques to our own projects. Thanks!
Most common mistake A LOT of people do. They make the pad too big. Your cement pad should be the exact dimensions of the walls so you can finish the siding/parging down to the bottom so that water will not ingress under the bottom plate. If you want a pad in front of the shed/garage, pour it after the fact, leaving a small gap between the two slabs so that rain water/melting ice will drip there. I have torn down many sheds/garages in my lifetime and most had rotted from the bottom because of this reason !!!!!!!!!!!!!!!!!!!!!!!!
I really like your videos and I have learned a few tricks. I apprenticed as a carpenter in northern BC in the early 1980s and I would like to add one piece of advice. ALWAYS use eye and ear protection when running any power tools. After several cases of scratched eye corneas (painful and scary) from flying bits of wood from a power circular saw, I learned my lesson. I always wear eye (and ear) protection when working with all power tools.
Awesome vídeo! Very easy to understand and no "hidden" tricks... Cheers from Neuquén, Patagonia Argentina! By the way: real men sweat when working hard, wich to me means RESPECT!
45:26 You should also use eye protection when using the hammer tool - wood chips can sometimes be shot outward by the pressure. Not a huge risk, but worth taking 10 seconds to slide on your protective "eyes." Love the video series, by the way. You got me hooked in with your drywall series, and I've expanded out from there. Even though I've done some of these things before in my home reno DIY projects, I inevitably learn something from every video. The continuous flow of tips and tricks is awesome!
I've been planning to build an extension onto the side of my shed, and was planning to make a single roof 8' tall on one side and 7' on the other. Awesome, now I get to see how to build it before I build it! Great tip on how to brace the wall by yourself, since I'll be working alone, too!
Very helpful, we just finished building our shed. A little different but custom using the principles we learned here. Thank you for recording and explaining everything!
Love your job too! Really wish that's the direction I had chosen for my life 20 years ago. Now I get to enjoy your great videos, learn and experiment at home. Thank you!
Thanks Jeff for ALL the Tips, my son and I are going to build our 12x16’ storage in 2 weeks time after finishing our neighbor fence, once again 🙏 and have a good day Jeff.
Jeff I want to say that you are an exceptional instructor. Many thanks for your ease of instruction and tricks of the trade informative video. I love everyone of them, always learning something new. For a Canadian, I appreciate the american standard in measurement you use. The metric standard is certainly better, but we seem to want to be different. We are starting to appreciate it, as most of our vehicles are using metric measurements in their nuts and bolts-sooo much easier. Thank you again.
Thanks for the informative video on building a shed. There are some nice tips here and keeping shed simple saves money, like the shed roof instead of the gable. This fellow appears to know what he is doing, a good design to follow.
I've been watching for a while, first time commenting. Thank you SO much! Simplifying the process is the best way to get someone like me - happened to not have anyone handy growing up that taught me - to begin to learn these skills you've mastered. I recently purchased my first home and I've been so excited over the past couple of months to put to use the countless hours I've watched of your tutorials. Lots of dumb mistakes are made early on, but I'm familiar with that process from computer programming so I continue to press forward and learn. Thank you! Cheers from Windsor
Just in time for me to build my new shed, looking forward to the next video, so I will have the complete picture. Thanks for creating such amazing videos.
Great video, I have been thinking of building a shed and always worried about having someone to assist. The tips on doing this solo is great. Great video series.
👍👍 👍, wonderful job, specially the technics. As soon as I finish the bathroom I am putting in, I will start a shed. Thanks for the hard work in the hot weather 🔥.
I am waiting for the rest of building this shed. I love your videos. Your video on basement and drywall and mudding was fantastic. You are good and thank you very much for sharing.
not relevent to this video but, I remodeled my entire kitchen for my mom just from watching your videos. Im 17 and you make things so simple and understandable.
thank you. finally someone who shows you how to build stuff without spending thousands on tools that most people will only use once. you sir, are a scholar and a gentleman. and i like how you explain the costs of buying a pre built shed. pre built sheds actually use cheaper materials, and many dont use 2x4's for the walls but 2x3's. and yea, how much do you want to spend? $10,000 for a pre built shed with cheaper weaker materials? or $2,000 for the materials and build a stronger better one? choices.....
This is extremely helpful! It's actually the exact plan I am working on for my yard. So it's perfect! 1 question though. Which types and sizes of screws, bolts, and nails did you use for different parts of the construction?
Very well organized set of videos explaining everything needed to know about framing and building a shed. I'm subbed and will be catching up on alot of your content.
I never liked wearing caps when working outside, blocked my vision, but I do wear a bandana to keep the sweat out of my eyes. I'd keep two or three in the cooler to refresh. Cooldowns cooling wraps at Home Depot. Another great vidioe.
Dude, you simply awesome. I really really appreciate all the little info you through here and there. Which let us learn how to do framing the right way. So thank you so much for everything you have taught me
@@HomeRenoVisionDIY jegf have a question i am currently going to deck an area i was a concrete patio what would the best way to go about it total removal of the concrete its 3 inch deep no rebar
You by far is my favorite UA-cam contractor with all the the hidden techniques and simple explanation in general terms. As a rookie, I believe I have saved a lot of mistakes just by following your techniques. By working in a temp of 100+ degrees and being able to explain yourself in a calm professional manner is also very impressive. I’m truly now a fan of your site.
Can you show us how to do a skim coat on a wall thats already been painted? When should you do a skim coat? Story is...someone did a horrible paint job where they painterd over nails and paper (crazy) the paint was so grainy I thought it would be better to put a skim coat on the wall before painting vs stripping years of paint on top of paint. Not only did it come out terrible lol but I spent sooooo much time sanding as many imperfections as I could. Videos on water damage would be great i think considering the hurricanes that are happening and fire damage as well. Just some video suggestions. I love your videos so much its so much more realistic and better than anything HGTV or DIY airs. Nothing you do ever gets old I wouldn't even mind you remaking your older videos or showing us projects even if it seems repetitive. Thanks to you and your team for all that you guys do!!
Come on guys give him more likes! Great video! Love your channel! Please add links of materials like those panels to the description. Didn’t see them at homedepot
This was a helpful video. I already am a woodworker as a hobby for the past 35 years, but a brush up on actual building layout is helpful. I plan in the spring to build an auxiliary "closet/shed" of the back of my shop to house the dust collector and maybe the compressor. I have a California compressor which is already very quiet but I may put it out there due to space constraints. Any advice as to connecting the narrow shed to the shop building? One last comment. I really would advise against anyone from holding the wood up in the air without proper support underneath to cut the wood. If there is any kind of kickback you can say goodbye to your thigh or forearm. ALWAYS have proper support under a piece of wood while cutting it. You can cut the wood on the ground with another board supporting it and gives clearance for the blade. Just my two cents.
really enjoy the channel, as well as your humorous approach. As a fellow Canuck and Ontarian, bonus points for giving directions that I know will meet local codes. I don't suppose you plan on doing a video regarding residential flat roof construction? Mine is in need of some serious repairs, and no local roofers want to touch residential flat roofs
To watch the entire building process click this link. Cheers! ua-cam.com/video/BLk_CAMmQPc/v-deo.html
I enjoyed your video. The slab is barely 4" above grade. Where I live (Louisiana) I have replaced many sheds built that way because the siding and frame rot due to ground moisture and water splashing up from the roof run-off.
Did you needed a construction permit to build the shed and how big you can build a shed without permit
@@justintorres2786 He covers that question. Answer is "it depends ". Check with your local building department.
so on the 7ft walls you took away 1ft an 6inches from your 8ft piece to allow for the top/bottom plate and the extra top plate correct?
what type of screws (and length) did you use?
This is why I watch this guy. Honest, straight forward and to the point plus I can afford these tools, methods and materials. Thank you. And yes I agree about just getting the timber delivered because you can choose a beautiful straight as aces piece of lumber in the yard but it'll be just as warped as any other when stored outside for a night.
Well put, Cheers!
I really appreciate the ACTUAL DIY aspect of these video's where a normal person with a normal set of tools can do it. So Many of these "DIY" video's explain how to build things and then proceed to use a bunch of custom tools that a lot of people don't have.
very true griffin. every time I see a diy video from a workshop I say to myself, well there is 90% of folks who just can';t do that
I’m building this right now and it’s working! I’ve not done any of these things prior. No pad pour, framing nothing. Mine has different dimensions than yours so I’m having my own adventure haha but it’s working and it’s fun! You’re such a great teacher. No step or scenario left unsaid. Thank you SO MUCH! I am definitely joining the VIP club 🤓😎
Seems good so far! Was easy to talk to about his My Shed Plans [Go Here=> *WoodBlueprints. Com* ]. Guided me in the right direction & helped me understand everything & in the end it was what I wanted
You do a good job at explaining why certain measurements or techniques are used rather than just telling what to do. That really helps when adapting techniques to our own projects. Thanks!
Thanks Curt, this design can be built as huge as you want to up to a 16' roof!
This guy rocks. Thank God he is from Canada.
Most common mistake A LOT of people do. They make the pad too big. Your cement pad should be the exact dimensions of the walls so you can finish the siding/parging down to the bottom so that water will not ingress under the bottom plate. If you want a pad in front of the shed/garage, pour it after the fact, leaving a small gap between the two slabs so that rain water/melting ice will drip there. I have torn down many sheds/garages in my lifetime and most had rotted from the bottom because of this reason !!!!!!!!!!!!!!!!!!!!!!!!
I woke up to drink my coffee, and watched this entire video. He kept me interested and he explained some interesting bits. Great video 👌
Me too!
Just want you to know you have the best videos on DIY I have found for newbies like me, and you are more than tolerable to watch.. Safety third!!
Cheers, glad to hear that I am tolerable.
Thanks for the video and the pleasant attitude and no fowl language.
Well shit...
I know, i was like, "What the duck?"
I like this guy. He knows A LOT of tricks most long time contractors don't know.
Name one.
I really like your videos and I have learned a few tricks. I apprenticed as a carpenter in northern BC in the early 1980s and I would like to add one piece of advice. ALWAYS use eye and ear protection when running any power tools. After several cases of scratched eye corneas (painful and scary) from flying bits of wood from a power circular saw, I learned my lesson. I always wear eye (and ear) protection when working with all power tools.
your customers should appreciate you. you seem to be a down to earth realistic guy. I'd hire you for sure
Awesome vídeo! Very easy to understand and no "hidden" tricks... Cheers from Neuquén, Patagonia Argentina!
By the way: real men sweat when working hard, wich to me means RESPECT!
Cheers to Argentina!
"Crooked lumber straight lumber, it's all the same thing". I couldn't resist. Thanks for the video
It's just a shed. Cheers!
He's right tho, it'll straighten up
I've watched a lot of videos on framing. This by far best system.
Thanks Walter!
45:26 You should also use eye protection when using the hammer tool - wood chips can sometimes be shot outward by the pressure. Not a huge risk, but worth taking 10 seconds to slide on your protective "eyes."
Love the video series, by the way. You got me hooked in with your drywall series, and I've expanded out from there. Even though I've done some of these things before in my home reno DIY projects, I inevitably learn something from every video. The continuous flow of tips and tricks is awesome!
I've been planning to build an extension onto the side of my shed, and was planning to make a single roof 8' tall on one side and 7' on the other. Awesome, now I get to see how to build it before I build it! Great tip on how to brace the wall by yourself, since I'll be working alone, too!
This is going to work well for you then. Cheers!
Very helpful, we just finished building our shed. A little different but custom using the principles we learned here. Thank you for recording and explaining everything!
Love your job too! Really wish that's the direction I had chosen for my life 20 years ago. Now I get to enjoy your great videos, learn and experiment at home. Thank you!
Have fun with the experiments. Cheers!
Hinge, lift and hold technique ...brilliant..worth waching the vid just for that..feeling inspired
A thumbs up just for the inhale after the first nail gun shot...that was great!! Keep up the great work!
Cheers and Have a great Christmas!
I look forward to your next video. Thank you for sharing.
Thanks Cheryl, next weekend is the roofing system. Designed so that 1 person can build and install in a day!
Thanks Jeff for ALL the Tips, my son and I are going to build our 12x16’ storage in 2 weeks time after finishing our neighbor fence, once again 🙏 and have a good day Jeff.
Definitely the best video in this field, every detail shown and explained. High five,congratulations and thank you.
Jeff I want to say that you are an exceptional instructor. Many thanks for your ease of instruction and tricks of the trade informative video. I love everyone of them, always learning something new. For a Canadian, I appreciate the american standard in measurement you use. The metric standard is certainly better, but we seem to want to be different. We are starting to appreciate it, as most of our vehicles are using metric measurements in their nuts and bolts-sooo much easier. Thank you again.
Top class tutorial! This channel is just getting better and better.
Thanks Danny, we will never stop getting better. Cheers!
Thanks for the informative video on building a shed. There are some nice tips here and keeping shed simple saves money, like the shed roof instead of the gable. This fellow appears to know what he is doing, a good design to follow.
Great teacher! I am learning a lot on your channel. Thank you.
Wow everything became very clear..no doubts about building my own shed now..in fact im looking forward to it..
I've been watching for a while, first time commenting. Thank you SO much! Simplifying the process is the best way to get someone like me - happened to not have anyone handy growing up that taught me - to begin to learn these skills you've mastered. I recently purchased my first home and I've been so excited over the past couple of months to put to use the countless hours I've watched of your tutorials. Lots of dumb mistakes are made early on, but I'm familiar with that process from computer programming so I continue to press forward and learn. Thank you! Cheers from Windsor
Thanks for the comment, and cheers to Windsor!
Brilliant well done....you done a grand job.....cheers Michael
Mindbuildingsolutions approved!
Excellent video and content.
Just in time for me to build my new shed, looking forward to the next video, so I will have the complete picture. Thanks for creating such amazing videos.
Thanks for the kind words. We are trying to help the best we can. Cheers! See you Saturday!
Putting my shed walls up today. Your videos are so helpful man, thanks
Toby Swope Howd it go man?
Good job, I like your idea Home RenoVision DIY. I watching you every clip
Thanks for the videos, they help me get the job done better and safer
And each time we watch someone like you framing shade or house we of course will always remember the Great Professor Larry Haun !
Wow!!! Now that's some great info. Thank you for braving the heat to show this.
Great video, I have been thinking of building a shed and always worried about having someone to assist. The tips on doing this solo is great. Great video series.
Thanks, Part 4 just released. Cheers!
We love your show, and You are the best Amen.
👍👍 👍, wonderful job, specially the technics. As soon as I finish the bathroom I am putting in, I will start a shed. Thanks for the hard work in the hot weather 🔥.
Cheers my man!
I am waiting for the rest of building this shed. I love your videos. Your video on basement and drywall and mudding was fantastic. You are good and thank you very much for sharing.
Thank you, we really appreciate your comment. See you next Saturday for the roofing system.Cheers!
not relevent to this video but, I remodeled my entire kitchen for my mom just from watching your videos. Im 17 and you make things so simple and understandable.
Brilliant! MANY things I did not know! I love this channel!!
Another great and professional job!👏🏻👍🏻💪🏻
Subbed. Great content. This is the kind of training kids need nowadays.
Great video Jeff! Your videos are such a great tool to us diyers. Cheers from New York!
Thank you we appreciate that. Cheers to New York!
I really enjoy your channel - everything is well explained. One comment though - eye protection!
I really loved it! Very entertaining the way you explain everything, very funny. Especially your Canadian accent. Very excited to see next episodes.
Thanks lot, we will see you next weekend for the roof. Cheers!
thank you. finally someone who shows you how to build stuff without spending thousands on tools that most people will only use once. you sir, are a scholar and a gentleman. and i like how you explain the costs of buying a pre built shed. pre built sheds actually use cheaper materials, and many dont use 2x4's for the walls but 2x3's. and yea, how much do you want to spend? $10,000 for a pre built shed with cheaper weaker materials? or $2,000 for the materials and build a stronger better one? choices.....
Out of all the videos I have watched about buuilding my shed, this video was amazing and so easy to understand. Thank you!
Thank you so much for this video. You’re a very hard worker and your videos are very very educational.
This is extremely helpful! It's actually the exact plan I am working on for my yard. So it's perfect! 1 question though. Which types and sizes of screws, bolts, and nails did you use for different parts of the construction?
Very well organized set of videos explaining everything needed to know about framing and building a shed. I'm subbed and will be catching up on alot of your content.
Great video and teacher! Will be attempting your method soon and some of other videos.
You're my new best friend! Brilliant!
Absolutely filled with brilliant tips as usual. Thank you for sharing. This series is proving to be so useful to me :-)
You are awesome in renovations, I like how you keep it simple,always great idea
I never liked wearing caps when working outside, blocked my vision, but I do wear a bandana to keep the sweat out of my eyes. I'd keep two or three in the cooler to refresh. Cooldowns cooling wraps at Home Depot. Another great vidioe.
nice idea, not sure if I would like that look.
I think it would work. Try it you might like it. I was the same way but my son talked me into it, he thinks I'm cool now, huh.
Dude, you simply awesome. I really really appreciate all the little info you through here and there. Which let us learn how to do framing the right way. So thank you so much for everything you have taught me
Not as much the right way, as a great way to build a shed.
Through the whole video I was anticipating those last few minutes!
just found your channel, your videos are awesome. love how simple and straight forward everything is.
Thanks David! Welcome to the Home Renovision Crew. Cheers!
Rumor has it Jeff got a 30 round drum magazine is still driving nails into the shed using his 22 caliber nail driver.
Nice, i like that you keep it simple
I like your videos a lot, sense of humor and very good tips 👍
Just have to wait for the next one 😎
sorry we are not filming in real time but that would be a little boring I would think. I took a lot of breaks!
Using the triangle makes it so fast! Genius 👍
jeff just found your channel excelent to watch sitting down to watch the entire building process after decking as that's my lockdown project thanks
Awesome, thank you!
@@HomeRenoVisionDIY jegf have a question i am currently going to deck an area i was a concrete patio what would the best way to go about it total removal of the concrete its 3 inch deep no rebar
Your videos are awesome.
Now that was a bloody good video Bravo.
You by far is my favorite UA-cam contractor with all the the hidden techniques and simple explanation in general terms. As a rookie, I believe I have saved a lot of mistakes just by following your techniques. By working in a temp of 100+ degrees and being able to explain yourself in a calm professional manner is also very impressive. I’m truly now a fan of your site.
that intro was so solid info what and why, i needed to comment, and btw good editin now!
Thanks, we are constantly working on getting better. Cheers!
I really enjoy the series approach
I first got hooked on these videos when he built a deck. I watched the entire video in one sitting.
That was a real commitment. Thanks, glad to have you on board this ship. Cheers!
@@HomeRenoVisionDIY Is it bad that I watched it a second time when my wife got home from work?
Can you show us how to do a skim coat on a wall thats already been painted? When should you do a skim coat? Story is...someone did a horrible paint job where they painterd over nails and paper (crazy) the paint was so grainy I thought it would be better to put a skim coat on the wall before painting vs stripping years of paint on top of paint. Not only did it come out terrible lol but I spent sooooo much time sanding as many imperfections as I could. Videos on water damage would be great i think considering the hurricanes that are happening and fire damage as well. Just some video suggestions. I love your videos so much its so much more realistic and better than anything HGTV or DIY airs. Nothing you do ever gets old I wouldn't even mind you remaking your older videos or showing us projects even if it seems repetitive. Thanks to you and your team for all that you guys do!!
Nice job! Leaning heaps - Thanks
love watching your videos..........nice work
Thanks Scotty!
I love it , very informative, easy to falow the. Steps , thank you!!!
I love your videos, believe I have watched them all, and this series is on the top of my list to actually do!
Very cool Chris. We would love to see your finished product when it is done. Perhaps you could be our next reno ninja
Come on guys give him more likes!
Great video! Love your channel!
Please add links of materials like those panels to the description. Didn’t see them at homedepot
I am not sure ifd they are always in stock at every store but you can find them at most building stores.
THANK YOU FOR ALL OF YOUR VIDEOS/EXPERIENCE!!!!!👍
Shhhhh no need to yell. Cheers!
Great video, with real work and explanation. Very nice job there. Greetings from Mexico! =)
Great video, very informative & easy to understand! Subscribed!
Top quality work again
Thank you Scott!
Really awesome job, thank you! Your videos are gold
Thanks Chris!
Looking forward to see the part 4 roof installation from Melbourne Australia
Great tutorial!👏🏻👍🏻
Thank you for explaining the "WHY"!
Cheers!
Good job dude.
This was a helpful video. I already am a woodworker as a hobby for the past 35 years, but a brush up on actual building layout is helpful. I plan in the spring to build an auxiliary "closet/shed" of the back of my shop to house the dust collector and maybe the compressor. I have a California compressor which is already very quiet but I may put it out there due to space constraints. Any advice as to connecting the narrow shed to the shop building? One last comment. I really would advise against anyone from holding the wood up in the air without proper support underneath to cut the wood. If there is any kind of kickback you can say goodbye to your thigh or forearm. ALWAYS have proper support under a piece of wood while cutting it. You can cut the wood on the ground with another board supporting it and gives clearance for the blade. Just my two cents.
that would all depend on where you live and the climate!
Awesome video as usual!
Thanks Justin!
Just got some popcorn, been waiting for this video for a long time.
Thanks Red, sorry to make you wait. Cheers!
@@HomeRenoVisionDIY thank you!
sayyyyy whaaaaat
really enjoy the channel, as well as your humorous approach. As a fellow Canuck and Ontarian, bonus points for giving directions that I know will meet local codes. I don't suppose you plan on doing a video regarding residential flat roof construction? Mine is in need of some serious repairs, and no local roofers want to touch residential flat roofs
Just buying a home and I know feel quite comfortable in building a pool shed and maybe a spot to hide my lawnmower....thanks from Kemptville area
Awesome video!
Thank you. Cheers!
Brilliant. Brilliant. Brilliant. So many excellent tips as usual :-)
Thanks Maria! Cheers!
nice job sir again awesome work.
Thank you. Cheers!
Just what I been looking for. Subbed
Great job!
Love that you're still having fun around the 46:20 mark. lol