these were very helpful, i always hate it when i have to make it look like im cutting a 100 dollar bill but i dont actually want to cut it, thank you so much, saved me lots of money
Improvised anchor using plastic tube: really loose when he wiggles it. Soldering iron kickstand out of wire: yeah, that won't be in the way at all. Wire caddy: Sure, have sharp metal screw points sticking into it where you wind your wire. Wood joint: That's called a dado joint and has been used for hundreds, maybe thousands, of years. Nut from angle iron: great, you just spent half an hour reinventing the 25 cent wing nut.
Exactly, because these tools (no pun intended) don't actually work in the fields of woodwork, metalwork etc, all they do is think up crap like this. If you're a tradesperson and don't have what it takes to do the job and need to revert to doing this crap then quit because you're useless.
Make me happy to see these in UA-cam...Sad and wondering why there is no more shop class in schools as a norm anymore (T.T)...tyvm for the vids...much appreciated!!!
I'm not going to use most of these but the principles of thinking outside the box are solid. Like using the piece of downspout for organizer dividers. I would have tried taping cardboard together but this trick makes you think of long stock in the shape you need. Generalizable.
Don't wipe your glue... Let it dry as it lays. Once it has dried it comes off clean and easy with a sharp chisel. That way the glue doesn't prevent the wood grain from receiving stains or finishes.
the one with the plastic tube and hole, it's ironic how they went through all of that but yet it still wiggled after giving it the ol' wiggle/tug, where as if it was properly done .... It wouldn't have wiggled
Erm... the money you spent on making a retractable extension lead... you could have just bought a retractable extension lead..... maybe even 2 of them.
Ich warte bei dieser Art Videos immer darauf, dass tatsächlich mal was gezeigt wird, das man entweder a) wirklich mal brauchen kann, oder b) nicht für wenige Cents/Euros an jeder Ecke zu kaufen gibt. Wenn ich mal nach Sibirien auswandern sollte, und der nächste Baumarkt 400km entfernt ist, bin ich aber gerüstet.
Just practical ideas some good some nay. The soldering iron holder sucks...it gets in the way. Makeshift molly bolt in wall nay...loosely holds and will fail later.
Liked the simplest ideas best like the soldering iron rest but not fussed on the power cord reel idea....overengineered, takes up too much space and therefore could be awkward to store and if you had to buy components to make, it would not be cost effective.
Um, how big of a hole did you drill to fit that nut in? Are you sure that plastic tube expander will apply enough friction so that the impact wrench you're tightening it with doesn't make it spin out? That massive bolt will definitely be able to hold the bracket up. Just the bracket though.
Some of this was very hard to watch. We gave a home depot here and alot of things have been made to cancel the need to invent lots of these things and they are cheap if your time is valuable. Smart people try and get more done not create tools to get more done and actually get less done by spending to much being smart
Liked the clip and the idea for the soldering iron. I had a similar issue and used a bean can's top and a pair of scissors to cut the metal into shape. I used a pair of long nosed pliers to bend the whole bit into shape. Still works pretty good.
I am a data analyst and find these videos interesting, but I do not have any of this crap and tools laying around the house...I just buy finished goods when needed.
My favorite was when he made a wing nut. I was like wow, that had to be about necessity. This guy must be out of gasoline to go to the hardware store. He has metal and a grinder, a bolt and no way to attach it to whatever that NASA or Elon Musk product was going to be. So he made a space age wing nut. That is off the charts. I mean invention at its finest. God bless that man, truly.
Actually that idea is very helpful to me. For some reason, wing nuts just aren't available in my area. There are too few shops selling those and even then they don't have the size I need. Obviously I can just use a normal nut but it is not as handy in some situations. Or I can just weld 2 pieces of metal to a nut and call it a day! :))))))
Thank you for taking the time to post this. I enjoyed watching, even if I never use any of these ideas. By the way, to those who have nothing nice to say, I'm glad you are so above all of this.
@@8eSix Right? Once in the bluest moon, you might see an interesting idea (the magnet and wrench idea), or at least, shitty execution that could be done more smartly. What gets me is how laborious some hacks are, just to get something truly shitty. Not this channel specifically, but the bottle caps and hot glue hacks come to mind.
The next video is great. He takes water and extracts the oxygen so he can breathe. He just walks past all that lovely breathable air and jumps into the sea to do it 🤣
Нет, ладно бы он циркуль из ножниц сделал, но для него судя по всему открытием является то, что если вещь с двумя дырками одной из них насадить на саморез, во вторую вставить маркер и всё это провернуть вокруг самореза, то получится круг
I made a latch you shove through these 2 cabinet doors to force them to stay shut because of mice or rats and sealed the bottom and top with extra wood strips so they couldn't get through. I used chopsticks and one of those wide load skinny boards someone threw over my fence. I do love being gifted used wood by evil people. Sand it down, good as new. Thing is, I can't remember all the cool things I see on youtube. Heck. I grabbed my hot glue gun and went to hot glue this corner of an exercise puzzle mat in the next room and when I got in there I forgot why I had my glue gun in hand in the first place. Unplugged it thoroughly disgusted with myself, then looked at the mat under my feet and remembered why so I plugged it back in. It's annoying. You're bright. Don't smoke and you'll stay bright. Good work! Love the wooden cube in a cube.
@@TangoNevada The cable will get warm with enough load on it, since the cable are rolled up, there is nowhere for the heat to escape and the cable will combust. You should always pull out the full length of cable, even on the factory made ones.
LOL...I'm going to have to watch that again. Some went past me before I got what you were doing. I don't work in your field, but I can totally see how I can utilize some of what you did in mine. Way Cool Dude!!! Thanks
I agree with your first sentence. I wish that person had slowed down a bit and explained what and how much the measurements were. The way the video was made is that some things make no sense until later, then we are well past the point of interest. To the maker of this video WHAT'S THE BIG RUSH? You flip things around so fast it is impossible to follow what you are doing.
at video position 5:33, a person makes a cube 43X43, uses a forstner bit to drill in order to make a small one inside, is there someone can tell how deep to drill and the size of it? Tried from 33mm to 30mm, the little cube always comes out
✅NEW AMAZING VIDEO HERE 👉 ua-cam.com/video/_RfbeGMmbuA/v-deo.html
Ь
Ьз
these were very helpful, i always hate it when i have to make it look like im cutting a 100 dollar bill but i dont actually want to cut it, thank you so much, saved me lots of money
Put another picture that didn't happen.
click bait?
100 % clickbaite that picture
Yeah I saw that and thought "how can that be easier then just knocking them off with a chisel?" And then they knocked them off with a chisel.
Improvised anchor using plastic tube: really loose when he wiggles it. Soldering iron kickstand out of wire: yeah, that won't be in the way at all. Wire caddy: Sure, have sharp metal screw points sticking into it where you wind your wire. Wood joint: That's called a dado joint and has been used for hundreds, maybe thousands, of years. Nut from angle iron: great, you just spent half an hour reinventing the 25 cent wing nut.
Exactly, because these tools (no pun intended) don't actually work in the fields of woodwork, metalwork etc, all they do is think up crap like this.
If you're a tradesperson and don't have what it takes to do the job and need to revert to doing this crap then quit because you're useless.
He never said he invented these processes just helpful tips and your criticism just shows your lack of creativity and ingenuity
@@russellherring8180 Creativity and ingenuity in producing slipshod hacks? There are already right ways to do these things.
0:21 = big fail, in my opinion.
Make me happy to see these in UA-cam...Sad and wondering why there is no more shop class in schools as a norm anymore (T.T)...tyvm for the vids...much appreciated!!!
Worth watching just for the magnet on spanner trick - thank you!!
I'm not going to use most of these but the principles of thinking outside the box are solid. Like using the piece of downspout for organizer dividers. I would have tried taping cardboard together but this trick makes you think of long stock in the shape you need. Generalizable.
Bravissimo 👍super 👍
Idk how this will take me to another level of working honestly… there’s cool ideas, but only depends on what kind of work you’re trying to accomplish
Wow, very cool 👍✌️👌 thanks my friend
👋👋
5:44 I made the same thing out of aluminum on a lathe but I even made more cubes inside without cutting them off. It looks cool 😎
To get a nut deep in a spot. Glue the nut to a wire. After you tighten the bolt to the nut. Pull hard on the wire to break the glue spot.
Easier to put piece of paper in wrench jaws and just force nut in. It holds .. Also works on sockets.
Don't wipe your glue... Let it dry as it lays. Once it has dried it comes off clean and easy with a sharp chisel. That way the glue doesn't prevent the wood grain from receiving stains or finishes.
I agree wiping the glue definitely does mess with stain later
Thanks, I always wiped it out, but after reading this, I'll try it for sure 🙏🏻
Thanks for that. I have had that happen to me before and wondered what people did about it
@@phoenixamaranth Glad i could help! You can also use painters tape and mask off anywhere you don't want glue to touch.
Pretending to cut a 100 dollar bill will definitely help with my woodworking
Wish I could get back those last 3 minutes of my life back. Absolutely ridiculous stuff.
This comment is useless
the one with the plastic tube and hole, it's ironic how they went through all of that but yet it still wiggled after giving it the ol' wiggle/tug, where as if it was properly done .... It wouldn't have wiggled
Love the videos...what kind of work do you do?
Very clever and useful. Thanks
These are garbage
Lmfao that flooring peace was so F'D after that little paper trick 🤣
Erm... the money you spent on making a retractable extension lead... you could have just bought a retractable extension lead..... maybe even 2 of them.
Всё хорошие лайфхаки. Спасибо за ролик
Ich warte bei dieser Art Videos immer darauf, dass tatsächlich mal was gezeigt wird, das man entweder a) wirklich mal brauchen kann, oder b) nicht für wenige Cents/Euros an jeder Ecke zu kaufen gibt. Wenn ich mal nach Sibirien auswandern sollte, und der nächste Baumarkt 400km entfernt ist, bin ich aber gerüstet.
Good vi!! It gave me a lot of good ideas
Reverse the drill when going through plastic, much smoother, less barbs and less likely to break
wow, awesome
Just practical ideas some good some nay. The soldering iron holder sucks...it gets in the way. Makeshift molly bolt in wall nay...loosely holds and will fail later.
That last one……..WHERE HAVE I BEEN F@@@@@@KING LIVING AT????!!!!!!!!!
Ооооо ещё один ЙУХ С ПРЕПАЯННОЙ ГОЛОВОЙ 😂😂😂😂 браво
Liked the simplest ideas best like the soldering iron rest but not fussed on the power cord reel idea....overengineered, takes up too much space and therefore could be awkward to store and if you had to buy components to make, it would not be cost effective.
They also make soldering iron holders that often come with the soldering iron and they only cost a few bucks at most.
Paper trick for cutting flooring was good. Other than that most were to time consuming for me to consider.
Would have looked better if the piece of cut laminate fitted properly
Yeah @BaalsMistress I immediately noticed the trick didn't help. I wouldn't want my floor to have gaps like that.
Um, how big of a hole did you drill to fit that nut in? Are you sure that plastic tube expander will apply enough friction so that the impact wrench you're tightening it with doesn't make it spin out? That massive bolt will definitely be able to hold the bracket up. Just the bracket though.
Six local
7:00 works great until it's tilted or turned upside down 🤣💯
I'm always impressed with the every day hacks that we an all do and use.
I can smell sarcasm in the air
I'd just like to get that magic blue cutting marker. Cheers!
Where do you get them pens from that cut the plastic tube ta.
0:21 Заметили косяк в правом углу? Хотя способ отметки не плохой.
Some of this was very hard to watch. We gave a home depot here and alot of things have been made to cancel the need to invent lots of these things and they are cheap if your time is valuable. Smart people try and get more done not create tools to get more done and actually get less done by spending to much being smart
👍👍🔥🔥смотрел с открытым ртом)))))
This was like a crafty panda video with stuff I might actually use!
Доктору Дью на пару роликов хватит))). Особенно про дюбель из силиконовой трубки.
точно!)))
You lost me at step 279 “ building the flux capacitor “
Liked the clip and the idea for the soldering iron. I had a similar issue and used a bean can's top and a pair of scissors to cut the metal into shape. I used a pair of long nosed pliers to bend the whole bit into shape. Still works pretty good.
It seems like the coiled wire would work like a heatsink and make the soldering iron not as hot as it should be
@@ScanMy2DBarcode You are correct. Its a bad idea.
9
They make very inexpensive holders you can buy at any store that sells solder equipment. They are cheaper than the time you spend to make a janky one.
I am a data analyst and find these videos interesting, but I do not have any of this crap and tools laying around the house...I just buy finished goods when needed.
Now I can shorten a pencil to 1 inch in less than a minute instead of taking all week!
Great crafts tutorial
Mẹo vặt hữu ích
My favorite was when he made a wing nut. I was like wow, that had to be about necessity. This guy must be out of gasoline to go to the hardware store. He has metal and a grinder, a bolt and no way to attach it to whatever that NASA or Elon Musk product was going to be. So he made a space age wing nut. That is off the charts. I mean invention at its finest. God bless that man, truly.
LOL! My thoughts exactly. What a nut
Actually that idea is very helpful to me. For some reason, wing nuts just aren't available in my area. There are too few shops selling those and even then they don't have the size I need. Obviously I can just use a normal nut but it is not as handy in some situations.
Or I can just weld 2 pieces of metal to a nut and call it a day! :))))))
Please use proper wall anchors
Thank you for taking the time to post this. I enjoyed watching, even if I never use any of these ideas. By the way, to those who have nothing nice to say, I'm glad you are so above all of this.
Every once in a while I can pick up something here but not this time.
Its a miracle all his/ her fingers are there still
Вспомнил СССР. Большинство придумок от туда.
First clip: *moves ruler and ruins cut so that it doesn't align correctly*
Некоторые изделия настолько ГЕННИАЛЬНЫ,что я не понимаю НА хуя они.?!
The first one
You can buy a contour jig for less than a couple of bucks and it'll give you a perfect outline and cut everytime
Loved the $100 dollar bill trick!
what kind of flooring was that at beginning please? :)
All that to roll power cord. Your tripping hahahah
I love how on the very first one he did with the paper he still had a gap on the right side.
I think the wall wasn't straight. He should have checked that, though.
And it wasn’t wood
Just buy a 4 ft adjustable drywall square already sheesh
I just came here to say that. Thank you. These vids are so bogus, but I can't help but watch sometimes
@@8eSix Right? Once in the bluest moon, you might see an interesting idea (the magnet and wrench idea), or at least, shitty execution that could be done more smartly. What gets me is how laborious some hacks are, just to get something truly shitty. Not this channel specifically, but the bottle caps and hot glue hacks come to mind.
As far as good, but still a lot of tools needed here - not to forget..
Посмотрев данное видео и почитав комментарии, я понял одно: Задорнов был прав на 100%.🤣
WOW Thanks for showing me a bunch shit people already thought of, COOL MAN !
Just a shame the first trick wasn't quite accurate lol
They shoulda redid that one
The next video is great. He takes water and extracts the oxygen so he can breathe. He just walks past all that lovely breathable air and jumps into the sea to do it 🤣
Real name should be, cheap ways to solve very specific problems no one else ever has.
На какой другой уровень??? Вы это про деградацию ??? 😳Циркуль из ножниц сделали 😂
Нет, ладно бы он циркуль из ножниц сделал, но для него судя по всему открытием является то, что если вещь с двумя дырками одной из них насадить на саморез, во вторую вставить маркер и всё это провернуть вокруг самореза, то получится круг
Good morning to all from SE Louisiana 9 May 22.
I made a latch you shove through these 2 cabinet doors to force them to stay shut because of mice or rats and sealed the bottom and top with extra wood strips so they couldn't get through. I used chopsticks and one of those wide load skinny boards someone threw over my fence. I do love being gifted used wood by evil people. Sand it down, good as new. Thing is, I can't remember all the cool things I see on youtube. Heck. I grabbed my hot glue gun and went to hot glue this corner of an exercise puzzle mat in the next room and when I got in there I forgot why I had my glue gun in hand in the first place. Unplugged it thoroughly disgusted with myself, then looked at the mat under my feet and remembered why so I plugged it back in. It's annoying. You're bright. Don't smoke and you'll stay bright. Good work! Love the wooden cube in a cube.
Thats 8 minutes of my life that I’ll never get back👎🏻
Детский сад очередной.
Congratulation and Thank you
JATeixeira
SC Brasil
The forst one with the vinyl flooring didn't quite work 😏
My dad did that with a caravan cord the rest of the wire on the roll acted as an electro magnet and burst into flames
Why? If it's wired correctly there should be no issue.
@@TangoNevada The cable will get warm with enough load on it, since the cable are rolled up, there is nowhere for the heat to escape and the cable will combust. You should always pull out the full length of cable, even on the factory made ones.
@@se-kmg355 Then it's not wired correctly. IE: wrong gauge wire. If you cord is heating up, it's too small of a gauge.
I have a reel that states while wound it can handle up to 720W, while unwound it goes up to 2500W. And why do you think that is?
@@se-kmg355 I'm not confused by the electron theory here. If you need a 2500W Cable, use one. That's all I am saying.
Bring your work to another level of hackery
I won’t remember all this cool stuff!
ん！～
竹の差し削れてるし！
46cm Metal ruler Drill 2mm holes every 5mm that makes a nice circle drawing tool.
Crazy you made a stand for the Soldering tool funny mine came with one so yeah cheap pos from Walmart to
day one shit for the entire clip lmfao
My favorite part was the giant gap on the vinyl plank from an improper angle, don't use paper ffs
LOL...I'm going to have to watch that again. Some went past me before I got what you were doing.
I don't work in your field, but I can totally see how I can utilize some of what you did in mine.
Way Cool Dude!!! Thanks
I agree with your first sentence. I wish that person had slowed down a bit and explained what and how much the measurements were. The way the video was made is that some things make no sense until later, then we are well past the point of interest. To the maker of this video WHAT'S THE BIG RUSH? You flip things around so fast it is impossible to follow what you are doing.
@@gordjohn2322 I'm glad at least some of that was not just me. Thanks for commenting.
@@gordjohn2322 Me too! I was left wondering what was that for?
If you used these you'd get laughed off of the job site on a real construction site
next level in this case would be a few steps down
ok, i fell for the money/blade trick😮😮
Ваууу Круто спасибо за идею 👍💖
Thumbnail doesn't exist in this video
👍👍👍
Spent all that time and money making an extension cord winder? No thanks
The hollow wall plug using clear rubber hose was lose wouldnt put anything heavy on the bracket
Appena mi compro un trapano a colonna, una sega a nastro ed una circolare... No, niente, mi sarò tagliato le mani.
0:21 ... в голос с рукожопа . Одна сторона прилегает другая имеет зазор больше пол сантиметра примерно на 30 сантиметров длиной .
I really just watch these for the lolz now.
at video position 5:33, a person makes a cube 43X43, uses a forstner bit to drill in order to make a small one inside, is there someone can tell how deep to drill and the size of it? Tried from 33mm to 30mm, the little cube always comes out
Копперфильд нервно курит в сторонке 👍
Great idea for a bong. Too bad I don't smoke. 😂
That flooring trick could be useful, but they really botched it up
i click “do not recommend this channel” when the thumbnail photo is not demonstrated in the video
WHO HAS TIME FOR CLICKBAIT?
I have seen the book these were taken from, lol
thank you for your great ideas
Congrats to everyone who is early And who found this comment 👏 ❤