Saved my life for the 300th time. I litteraly came in youtube thinking: "I hope phil has a video about how to install dos" for my current project. Thanks man.
6:07 "And it will create three 2TB partitions" Don't you think It's maybe a bit too much for MS-DOS? But then again you could fit lots of doom mods there.
Are you sure you would want to do that? I would be afraid of that myself, in case it would let viruses in on that partition that could affect another. Don't know for sure if that's possible but I would fear it anyway.
@@philscomputerlab I'm currently in quite the pickle sifting through ancient website FAQs and forums trying to perform an install. I appreciate the content and the reply regardless.
@@somacruz8272 Another UA-camr I watch called Michael MJD has done videos on OS/2, so you may want to look up his videos and maybe asking him, hopefully someone will help.
@@Venom012 I'm afraid I know more than him on this subject. He's certainly more versed in linux than I am. I was able to dualboot tiny core, BeOS, OS/2, and Native Oberon with an ETH Oberon running windowed in OS/2
hi , i have a ib970rf ibase motherboard sitting on a backplane , i have to install DOS6.22 on it , but it does not have a floppy drive slot , only USB slot available , please drop a word of advice , note that i have images of DOS floppy 1,2,3 and a separate boot floppy for partitioning . also note that i have installed DOS on IDE Floppy drive based motherboard rocky-4786evg-rs-r41 many a times in past for my industrial automation machine.....but such motherbords are obsolete now .............. Thank You
Great video and boot-up menu, very helpful! However, the CD-ROM is not detected by the system when I boot up. Does the CD-ROM driver require the sound blaster software to be setup beforehand if the optical drive is plugged into the IDE on the sound card (mine is)?
Can you get around the 4x2GB partition limit if you put in multiple physical drives? I remember reading somewhere that earlier versions of DOS (before 4.0) could only support up to 32MB partitions, but could have up to 2 partitions on up to 23 logical drives (which could be spread between 2 physical drives). I think it was a Vogons thread
Dear Phil, I had help to install MS-DOS 6.22 and he used your starter package :) However, whenever I try to install some software on it and use the "install command" it just launches the instalation for the starter package :/ How does I make this stop?
Thanks I've added the link to Starter Pack! DOS uses Floppies, not USB or ISO. You should be able to mount floppy images. But anyway, this is meant for real Retro PC to play old games :D
Phil, what kind of desktop case do you have this machine in? I'm sure you have already mentioned it somewhere but I did not find it. I was so pulled by your videos that I decided to build an old PC myself, although I really have no memories of old games to play on it. I have finally managed to get my hands on a proper Slot 1 motherboard for a pretty hefty sum, an SE440BX-2, only to find out that the sound chip is blown preventing bios to save any settings. No joy this time :)
Are you sure that the BIOS isn't just write protected or constantly reset by a jumper? Also did you install the latest BIOS and is the BIOS battery ok?
armorgeddon Well, I'm as sure as someone who does not really understand electronics. As far as malfunctioning hardware goes, I can only recognize a bad cap :) When I realised there was a problem with saving, I had the board checked in a trusted hardware service. The info comes from them. That broken chip apparently blocks some pathway and board can't save. They would be able to replace the chip, but they can't find it anywhere on the web for sale. Poof... nearly $30 went straight to dumpster. Pitty, it's a nice board.
I never heard that a defect component on a board can prevent the BIOS from saving. According to the boards doc the jumper called JBA1 could be the problem: -------------------------------------------------------------------------------------------------------------- How should the jumpers be set on my Intel SE440BX-2 Motherboard? --- Unlike some previous Intel motherboards, the Intel SE440BX-2 Motherboard supports a single header (J8A1) which selects the configuration mode for the BIOS Setup program. This allows all motherboard configuration to be handled in software via the Setup program. There are three functions which can be selected by this jumper: Function Jumper J8A1 Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed (processor speed is set in this mode). Recovery none (jumper removed) The BIOS attempts to recover the BIOS from a floppy disk. A recovery diskette is required. Note: There are no special jumpers for configuring the processor speed or bus frequency. Set the processor speed in the Setup program using Configure mode. Caution: The jumper settings should never be changed while the system is powered on. Always turn off the computer before changing the jumper. -------------------------------------------------------------------------------------------------------------- So I suggest to power off the maschine, set the jumper to 2-3, power it on, configure the BIOS the way you want it, save the settings, power off again, set the jumper to 1-2 and then power on again to see if it all works.
armorgeddon Thank you kindly for that info. As soon as I get that board back from service, I'll try just that. Nothing to lose by trying I guess. If that chips is the case anyway, we'll at least learn something from the experience. If it works - I was ready to use a SB 64 Gold with that anyway so I guess I would not need that onboard chip then. Btw. the soundcard is in the same service, it was missing some pins for memory extension card :) I could not find any better. Well, I could, but it was expensive as hell. I wanted the rig to be as close to Phil's as possibe so I could use all the tutorials he posted here. Thank you again.
Do you know why under dos 6.22 sometimes in setup I can't change the configuration for music cards (it says error or sometimes nothing). When I delete config file in dos i can save configuration. I just wonder why its like that?
Hi, I've a problem: I 've inserted disk 1 of 2, and says ok, but when I try to insert disk 2 of 2, it give me an "error": It says : "insert disk 2 of 2 and press enter" but when I press enter after insert disk 2 of 2, he returns to say "insert disk 2 of 2 and press enter". Please help me! Thanks P.S.: I have 5.0 ms-dos
Hi Phil, great vid as usual. I'm a long time follower, on Vogons also ;) Now, it's time for you to make some vids on how to fine-tune autoexec and config files ;) Congrats, again from Italy.
hey phil i have a tiny problem....i installed ms dos 6.22 on a old Dell OptiPlex GS+ 5200L with soundblaster 16 soundcard, 32mb edo ram, pentium mmx 200mhz generic cd drive and floppy drive....i used ur starter pack and i installed tomb raider and judge dredd ms dos games but when i play them i hear no music from the cd drive....what could be the issue im having? or some driver i need to install?
Do you get music from the front audio port, if your CD drive has one? Likely you are missing the CD audio cable from the optical drive to the sound card. It's analogue and you need a cable for this.
@@philscomputerlab The problem I have is the drive is blank. I don't know what OS was on there or if any. The file system is a Fat12. I'm not sure what I can install or if any.
I ran ms-dos bootdisk iso in a virtual machine, and that setup didn´t show up... how do I download the disk image? can I use a cd or usb drives to install it, instead of using floppy?
awesome i plan on doing this to an old medion laptop that thing can barely handle win7 :D so i plan on making it a dos machine with a crap ton of older games and such. because the laptop is super light i kinda have a no internet dos gaming machine. but i also plan on saving my passwords on it as my 3rd storage for them.
I need an older version of win zip to open all the files(one was ignored), or so Winzip tells me. SO-any sources for an older version available? Thanks!
Just type in old version of winzjp and it will list all the versions for download even the first version. Think the web site is literally called "old version" dot com
@PhilsComputerLab Do I need a floppy disk to install this? Can't I just download it from winworldpc, and from there boot in on with a USB? I'm wondering.. All I want is to install the MS-DOS 6.22 and when Windows 3.1 and play my old game ;) Thanks -Morten
Hello, I've used the MS-DOS 6.22/7.1 starter pack. WfW 3.11 has a few issues when I've installed it (I've installed the starter pack before windows and any drivers). The shortcut is gone and network drivers doesn't work, but it did before. Is there a way to make this starter pack compatible with Windows 3.1x?
I think I've figured it out. In config.sys there's a [c] thing, which I think is a jump label like ':1, :2, etc' which is what would be in a batch file. The other configurations seem to skip all of the rest of the config.sys commands. Only when I do [c] all the drivers are properly loaded. All the other jump menu things load only the CD driver, EMM386 and CTMOUSE driver but it fails to load the sound, network and other things in config.sys. Only when I load 'conventional memory only' it loads the [c] part of the script and loads all the drivers and it works :) I don't know much about config.sys commands and such, but is it possible to have a jump within a sub-routine?
I have an issue installing your starter pack. it only copies two files. autoexec.bat and config.sys arent copied (file not found). K6-2 500 Ga5ax voodoo3 2000. any idea? i'm a dos noob
You might be copying them in the wrong way. In other words, you would first have to UNHIDE all of the files before copying them because the system commands (*.SYS) and or other hidden files wouldn't copy otherwise.
Congrats by the way !!, i subscribe to your channel when we were like 2k , now almost 10k subs, keep the good work and great channel. Greetings from Costa RIca
Can this DOS be installed on one of those new mini computers? I still miss DOS terrible and think it was as good as Windows 10, if not better. It may not have allowed people to do much with videos (either to watch or upload as well as the latest Windows programs can do, but in those days the programs were so good that nothing today can ever replace them. I really miss the Q&A database as well as a good mortgage program called Mortgage Wizard which were written for 32 bit computers. Since then no one has ever, or likely ever will, write such intelligent, powerful, and easy-to-use programs. I also don't like to move to Windows 10 because of the nice tiny folders on the older versions. Yes, I know 10 can be made to look as nice as the older versions, but why didn't they leave it that way in the first place, and then if you wanted the new ugly menus, you could set them up that way? Do YOU like those big ugly menus? I so much miss DOS! Can DOS 6.0 and/or DOS 6.2 can be installed on ANY new computer, or must a person find an older computer to run it? I don't like the idea of running it on another partition on the same computer.
Hy Dear Phil, my name is Sam. I'm from Russia I don't know how make Windows 95 OSR 2.1 to see 30gb hdd. In Russia OSR 2.5 was never released. I don't know is there a lot of differences, but it OSR 2.1. I'm installing it on MS DOS 6.22. When everything finished, it showing me only 2 gb. Please help.
Your MS-DOS Starter Pack is a lifesaver. It makes things soo much easier to get going.
Saved my life for the 300th time. I litteraly came in youtube thinking: "I hope phil has a video about how to install dos" for my current project. Thanks man.
Glad I could help!
@@philscomputerlab Can I Install windows 1.0 or 3.1 in dos 6.22?
@@DanielBrosman08211986 Yeah you can
@@zrx.sh1 How about windows 10
@@DanielBrosman08211986 In Any version expcept Windows XP, You could install it on windows 10,8,7,Vista etc..
Thanks Phil. Your channel is like gold mine. I am about to build my very first 486 and this video will definately help a lot
I was struggling with CD-ROM support and this fixed it, thanks so much!
I remember my DOS6.22 days back in early 1996.... started of with an 850mb hdd in a 486dx4-100Mhz system.
I so miss the old MS stuff, it was so classy... haha!...
Thanks Phil that MS-DOS starter pack helped me out getting the cd drive to work on my old gateway 2000 witch is older than me
6:07
"And it will create three 2TB partitions"
Don't you think It's maybe a bit too much for MS-DOS?
But then again you could fit lots of doom mods there.
Are you sure you would want to do that? I would be afraid of that myself, in case it would let viruses in on that partition that could affect another. Don't know for sure if that's possible but I would fear it anyway.
XD oof
I'd say it's not a good idea to use a 6TB harddisk for DOS...
You probably know this, but he meant to say 2 GB, and you can see it on the screen. everyone (I hope) knows that 2048 MB is 2 GB.
@@someguystudios23 Good.
Do you have advice for partition schemes that accommodate OS2/Warp ? Thank you for the video btw.
You know, I've never used OS/2. Ever. So I have no idea...
@@philscomputerlab I'm currently in quite the pickle sifting through ancient website FAQs and forums trying to perform an install. I appreciate the content and the reply regardless.
@@somacruz8272 Another UA-camr I watch called Michael MJD has done videos on OS/2, so you may want to look up his videos and maybe asking him, hopefully someone will help.
@@Venom012 I'm afraid I know more than him on this subject. He's certainly more versed in linux than I am.
I was able to dualboot tiny core, BeOS, OS/2, and Native Oberon with an ETH Oberon running windowed in OS/2
i have question dose the MS-DOS after reboot i can 't format There is a message Invalid drive specification
Great, now I feel guilty about all of the perfectly fine old PC's I threw away!
Same
I hate it when people throw away old PCs.
@@someguystudios23 me too
You should
hi , i have a ib970rf ibase motherboard sitting on a backplane , i have to install DOS6.22 on it , but it does not have a floppy drive slot , only USB slot available , please drop a word of advice , note that i have images of DOS floppy 1,2,3 and a separate boot floppy for partitioning . also note that i have installed DOS on IDE Floppy drive based motherboard rocky-4786evg-rs-r41 many a times in past for my industrial automation machine.....but such motherbords are obsolete now .............. Thank You
Informative, useful, and well presented. Well done!
Thank you kindly!
Oh boy the good old days!! When you had to create bootup disks to get games to run!!!
Great video and boot-up menu, very helpful! However, the CD-ROM is not detected by the system when I boot up. Does the CD-ROM driver require the sound blaster software to be setup beforehand if the optical drive is plugged into the IDE on the sound card (mine is)?
ok, I answered my own question - yes you have to install the SB software first before the CD ROM will work.
Yea if the IDE port on sound cards is used, it often needs a driver to activate that IDE port in the first place :)
At 1992-3, DOS I learnt was 5.2!
Can you get around the 4x2GB partition limit if you put in multiple physical drives? I remember reading somewhere that earlier versions of DOS (before 4.0) could only support up to 32MB partitions, but could have up to 2 partitions on up to 23 logical drives (which could be spread between 2 physical drives). I think it was a Vogons thread
It's possible, I am using a 8.4GB HDD with 4x2GB partitions with DOS6.22+win3.11 on i486DX4 with DDO
Where's the link you mentioned in this video - NO can Find... Excellent video anyway - keep up good work... Much enjoyed...
What attrib and edit for?
Thanks for the starter pack - great idea. In case someone would like to remove the starter pack what would be the best way going about it?
One question, what is the difference between installed Ms dos and the Ms dos startup disk on windows formatting
After the system Reboots, I cant get to the setup. it just sends me to the A:/> prompt
How Do I change the config and autobatexe too change to danish keyboard layout?
Dear Phil, I had help to install MS-DOS 6.22 and he used your starter package :)
However, whenever I try to install some software on it and use the "install command" it just launches the instalation for the starter package :/
How does I make this stop?
Where do you buy a desktop PC that has that motherboard support?
Phils My version of DOS is 4 the one with Win98SE can i upgrade to DOS 6 without formating C: drive with A:\> SYS to C: with 6.22 boot floppy?
My laptop just says "Non system disk or disk error"
help
Yup same issue. Wish he had explained his process of making his dos disk.
I think thats because floppy is broken or its not bootable.
what starter pack dont see it in description., anytway to install form USB or ISO on a virtiual box?
Thanks I've added the link to Starter Pack! DOS uses Floppies, not USB or ISO. You should be able to mount floppy images. But anyway, this is meant for real Retro PC to play old games :D
How can i install it without floopies
Phil, what kind of desktop case do you have this machine in? I'm sure you have already mentioned it somewhere but I did not find it.
I was so pulled by your videos that I decided to build an old PC myself, although I really have no memories of old games to play on it. I have finally managed to get my hands on a proper Slot 1 motherboard for a pretty hefty sum, an SE440BX-2, only to find out that the sound chip is blown preventing bios to save any settings. No joy this time :)
I haven't mentioned it. I will be showcasing this build some other time. The case is a modern home theater type case.
Are you sure that the BIOS isn't just write protected or constantly reset by a jumper? Also did you install the latest BIOS and is the BIOS battery ok?
armorgeddon
Well, I'm as sure as someone who does not really understand electronics. As far as malfunctioning hardware goes, I can only recognize a bad cap :) When I realised there was a problem with saving, I had the board checked in a trusted hardware service. The info comes from them. That broken chip apparently blocks some pathway and board can't save. They would be able to replace the chip, but they can't find it anywhere on the web for sale. Poof... nearly $30 went straight to dumpster. Pitty, it's a nice board.
I never heard that a defect component on a board can prevent the BIOS from saving.
According to the boards doc the jumper called JBA1 could be the problem:
--------------------------------------------------------------------------------------------------------------
How should the jumpers be set on my Intel SE440BX-2 Motherboard?
---
Unlike some previous Intel motherboards, the Intel SE440BX-2 Motherboard
supports a single header (J8A1) which selects the configuration mode for the BIOS Setup program. This allows all motherboard configuration to be handled in software via the Setup program. There are three functions which can be selected by this jumper:
Function Jumper J8A1 Configuration
Normal
1-2
The BIOS uses current configuration information and passwords for booting.
Configure
2-3
After the POST runs, Setup runs automatically. The maintenance menu is displayed (processor speed is set in this mode).
Recovery
none (jumper removed)
The BIOS attempts to recover the BIOS from a floppy disk. A recovery diskette is required.
Note: There are no special jumpers for configuring
the processor speed or bus frequency. Set the processor speed in the
Setup program using Configure mode.
Caution: The jumper settings should never be changed while the system is powered on. Always turn off the computer before changing the jumper.
--------------------------------------------------------------------------------------------------------------
So I suggest to power off the maschine, set the jumper to 2-3, power it on, configure the BIOS the way you want it, save the settings, power off again, set the jumper to 1-2 and then power on again to see if it all works.
armorgeddon
Thank you kindly for that info. As soon as I get that board back from service, I'll try just that. Nothing to lose by trying I guess. If that chips is the case anyway, we'll at least learn something from the experience. If it works - I was ready to use a SB 64 Gold with that anyway so I guess I would not need that onboard chip then. Btw. the soundcard is in the same service, it was missing some pins for memory extension card :) I could not find any better. Well, I could, but it was expensive as hell. I wanted the rig to be as close to Phil's as possibe so I could use all the tutorials he posted here. Thank you again.
Can you do one 9n installing dos and win 10 on the same disk?
Do you know why under dos 6.22 sometimes in setup I can't change the configuration for music cards (it says error or sometimes nothing). When I delete config file in dos i can save configuration. I just wonder why its like that?
at 6:10 you said 3, 2 terabyte partitions... i din't know DOS could handle that :P
Gb
Yea meant to say GB. Sometimes I jumble things up :)
MS-DOS 3.2 can handle huge 32MB-Partitions, so he will have zillions of 'Drive-letters' ;)
from C: up to ZZZZZZZZ: :-D
Well i have installed dos with 16GB
It´s Gb he just made a mistake... everyone does
Really useful! Thank you! :)
Cheers!
Cheers :D
Thank YOU!
You're welcome!
Hi, I've a problem: I 've inserted disk 1 of 2, and says ok, but when I try to insert disk 2 of 2, it give me an "error": It says : "insert disk 2 of 2 and press enter" but when I press enter after insert disk 2 of 2, he returns to say "insert disk 2 of 2 and press enter". Please help me! Thanks
P.S.: I have 5.0 ms-dos
After installing MS-DOS 6.22, can you then input what you usually input (C: Win) to start up Windows?
Yes type win
how do you install 6.22 and windows 98 ontop eachother i heard can do that makign full supoport for both windows and dos games.
You don't need to, as Windows 98 is running ontop of DOS 7.1 which is very good.
Can MS-DOS be installed with an external USB floppy disk drive?
If the board supports USB Floppy, then yes!
Hi Phil, great vid as usual. I'm a long time follower, on Vogons also ;)
Now, it's time for you to make some vids on how to fine-tune autoexec and config files ;)
Congrats, again from Italy.
Thank you!
I'm happy with the starter pack to be honest. Keeping it simple and "it just works".
where did you get those floppy drives from?
I don't know, I've had them for many years!
Thanks! Great video!
hey phil i have a tiny problem....i installed ms dos 6.22 on a old Dell OptiPlex GS+ 5200L with soundblaster 16 soundcard, 32mb edo ram, pentium mmx 200mhz generic cd drive and floppy drive....i used ur starter pack and i installed tomb raider and judge dredd ms dos games but when i play them i hear no music from the cd drive....what could be the issue im having? or some driver i need to install?
Do you get music from the front audio port, if your CD drive has one? Likely you are missing the CD audio cable from the optical drive to the sound card. It's analogue and you need a cable for this.
@@philscomputerlab thanks for the info...i got it working now....thanks for your help and great videos 💯💪
i have question dose the MS-DOS starter pack support USB mouses?
That depends on the machine and the BIOS! Look for a BIOS option enabling USB keyboard and USB mouse support. Then it will work, yes :)
How about FreeDOS?
Still testing it :)
Even with FreeDOS' huge selection of semi-modern open-source software?
How much hard drive space is really needed to install ms dos on to the hard drive?
Run the CHKDSK command on your Retro PC and it will tell you!
@@philscomputerlab I don’t have one build at the moment. I have a 64MB hard drive in a old pc with 128MB of memory. Just wondering if that is enough?
@@DiyintheGhetto Easy, one floppy is only 1.4MB.
@@philscomputerlab The problem I have is the drive is blank. I don't know what OS was on there or if any. The file system is a Fat12. I'm not sure what I can install or if any.
@@DiyintheGhetto If there is a file system then it's not blank right?
I ran ms-dos bootdisk iso in a virtual machine, and that setup didn´t show up... how do I download the disk image? can I use a cd or usb drives to install it, instead of using floppy?
It should work just like in the video. Hope you fix your issue.
it's not working at all. it also says that my device's name is BANANA...
@PhilsComputerLab
What case is that
I'll do a separate video about this build at some point!
Did you manage to get around to that vid? Would like to see it.
awesome i plan on doing this to an old medion laptop that thing can barely handle win7 :D so i plan on making it a dos machine with a crap ton of older games and such.
because the laptop is super light i kinda have a no internet dos gaming machine. but i also plan on saving my passwords on it as my 3rd storage for them.
I need an older version of win zip to open all the files(one was ignored), or so Winzip tells me.
SO-any sources for an older version available?
Thanks!
Just type in old version of winzjp and it will list all the versions for download even the first version. Think the web site is literally called "old version" dot com
@PhilsComputerLab Do I need a floppy disk to install this? Can't I just download it from winworldpc, and from there boot in on with a USB? I'm wondering.. All I want is to install the MS-DOS 6.22 and when Windows 3.1 and play my old game ;) Thanks -Morten
Yes, get a Floppy Drive!
PhilsComputerLab Thank you! :)
can i use the gotex emulator to install 6.22? the reason i ask is because it formats all 100 blocks to 1.39 but all the 6.22 files online are 1.44
how do I install dos and not format the drive. I want to keep windows 98 on it also.
That's complicated and not really necessary because Windows 98 runs on DOS. Just shut down into MS-DOS mode!
Will this work with compact flash too?
Of course!
Hey, Wait a minute... Ive seen you in a forum once!! you were trying to get windows 9x on modern hardware!
Wow this is alot easier then installing arch
Can you install it on sata hdd?
Of course.
Hello, I've used the MS-DOS 6.22/7.1 starter pack. WfW 3.11 has a few issues when I've installed it (I've installed the starter pack before windows and any drivers). The shortcut is gone and network drivers doesn't work, but it did before. Is there a way to make this starter pack compatible with Windows 3.1x?
I don't do anything with Windows, just DOS. I hope you can sort it out!
I think I've figured it out. In config.sys there's a [c] thing, which I think is a jump label like ':1, :2, etc' which is what would be in a batch file. The other configurations seem to skip all of the rest of the config.sys commands. Only when I do [c] all the drivers are properly loaded. All the other jump menu things load only the CD driver, EMM386 and CTMOUSE driver but it fails to load the sound, network and other things in config.sys. Only when I load 'conventional memory only' it loads the [c] part of the script and loads all the drivers and it works :) I don't know much about config.sys commands and such, but is it possible to have a jump within a sub-routine?
You must put stuff that should always be configured right at the top, before it has the jump menus.
Ahh ok. I haven't thought of that. Thanks :D
It's working perfectly now with all the options. Thanks very much for the help Phil!
Why do you speak with an upward affliction??
the starter pack dosent even work it says non system disk
you gotta put it in after the machine is booted
Yes
Says i need a password to use the Ms-dos starterpack
Doubt it, none of my stuff needs passwords.
how do you install this then windows 98 thanks
You don't, this tutorial is for a clean MS-DOS 6.22 Installation without Windows.
Music? :)
That's what I like to know too. That track sounds awesome.
Apparently it's 'Turn Up the Radio' by 'One Two Feet'
ua-cam.com/video/5aoIrU1UCwY/v-deo.html
My DOS 6.22 disk #1 will not launch the setup program, has anybody rub into this issue?
*run
I have an issue installing your starter pack. it only copies two files. autoexec.bat and config.sys arent copied (file not found). K6-2 500 Ga5ax voodoo3 2000. any idea? i'm a dos noob
Not sure. You might just have to manually copy them!
You might be copying them in the wrong way. In other words, you would first have to UNHIDE all of the files before copying them because the system commands (*.SYS) and or other hidden files wouldn't copy otherwise.
Great!
i have ms-dos 6.21 will this be the same?
Should be pretty much the same!
I'm building something like youre DOS Windows 95 hybrid Gaming PC.
can we do the same with the gotek floppy emulator ?
Of course!
Congrats by the way !!, i subscribe to your channel when we were like 2k , now almost 10k subs, keep the good work and great channel. Greetings from Costa RIca
How lovely is Costa Rica. So exotic. Always amazes me how global viewers live. Thank you!
Thanks for the files too!
What happend to gotek floppy emulator?
Haha, I was hoping someone would say: OMG you're using a real Floppy drive!
+PhilsComputerLab well i said :D
Ive never seen you using real floppy disks until this video :D
Install DOS from floppy it's a religious experience ;)
Haha, true :)
Cool ;D
Can this DOS be installed on one of those new mini computers? I still miss DOS terrible and think it was as good as Windows 10, if not better. It may not have allowed people to do much with videos (either to watch or upload as well as the latest Windows programs can do, but in those days the programs were so good that nothing today can ever replace them.
I really miss the Q&A database as well as a good mortgage program called Mortgage Wizard which were written for 32 bit computers. Since then no one has ever, or likely ever will, write such intelligent, powerful, and easy-to-use programs.
I also don't like to move to Windows 10 because of the nice tiny folders on the older versions. Yes, I know 10 can be made to look as nice as the older versions, but why didn't they leave it that way in the first place, and then if you wanted the new ugly menus, you could set them up that way? Do YOU like those big ugly menus? I so much miss DOS! Can DOS 6.0 and/or DOS 6.2 can be installed on ANY new computer, or must a person find an older computer to run it? I don't like the idea of running it on another partition on the same computer.
Hy Dear Phil, my name is Sam. I'm from Russia
I don't know how make Windows 95 OSR 2.1 to see 30gb hdd. In Russia OSR 2.5 was never released.
I don't know is there a lot of differences, but it OSR 2.1.
I'm installing it on MS DOS 6.22. When everything finished, it showing me only 2 gb.
Please help.
I don't know ms dow
todays kids dont know the joy of 3.5 dish installling lol
"Gigaboits"
Now AI do everything
Install command
Edit ASCII
ATTRIB +h +s +a or ATTRIB -h -s -a
im looking for a socket 7 motherboard for my pentium 1 cpu on ebay, but the prices are too inflated and i don't want to blow a hole in my wallet.
Try Second hand/flea markets or be an Indiana Jones on junkyards/e-waste...it's the only way
DIR A: /a /w
resolveu porra nenhuma!