Sram XX1 Eagle Derailleur - My Adjustment Mistakes. Tutorial
Вставка
- Опубліковано 9 вер 2024
- See also:
Sramm XX1 Eagle Derailleur Overhaul goo.gl/Z8KAqw
Discussion on this topic:
goo.gl/qezZTN
SickBiker Facebook Group: goo.gl/3YmcfN
Additional materials for Patrons:
/ sickbiker
MY GEAR IN 2018 SEASON:
- entry level XC hardtail
Rose Count Solo 2 goo.gl/6asWEz
- trail full suspension for technique drills
Merida One-Forty goo.gl/zHffHf
- e-bike
Merida eOne-Twenty goo.gl/p7dFMc
- climbing road bike
Merida Scultura 5000 goo.gl/UfrWQy
- power meter pedals
Favero Assioma Duo cycling.favero...
- my main camera and smartphone for LIVE episodes
Panasonic Lumix G7 amzn.to/2DgMpki
LG G6 amzn.to/2Df2SRY
My Amazon store with tested stuff: amzn.to/2fBut9s
music credits:
Goblins From Mars - Cold Blooded Love
Where to buy bike products:
amzn.to/34DlzxU 1x12 Sram XX1 Eagle groupset
amzn.to/34B2qwe XX1 Eagle cassette
amzn.to/3lmhAMC XX1 Egale speed chain
amzn.to/3iA5n5f Sram XX1 Eagle the rear derailleur pulleys
amzn.to/36DUuwY Sram XX1 Eagle bicycle crank
This is the best tutorial of adjusting Eagle that I have seen. Well done, and thank you for the instructions.
I think this video should be renamed have to adjust the Eagle drivetrain!
It's 4 years old video and it's still the best explanation
Very easy to understand and very useful
Thanks for your help
**This is probably the best (clear and to the point) description of fine tuning a Sram 12-speed derailleur on youtube. No detail left out.
Items covered that most videos fail to mention:
--Pre-barrel adjustment position.
--Removing cable prior to adjusting high limit screw.
--Setting bike to sag prior to using SRAM B-gap alignment tool.
Excellent videography angles and great description. Thanks so much. Now all I'd like to see is how to determine chain length on a new chain. :)
Something else worth noting is that the teeth on the largest gear of the cassette vary slightly in length and shape. When setting the B-gap its best to use the longest slimmest tooth on the cassette as the one you check against the line on the tool. When you have the tip of the correct tooth against the line all the other teeth match up in size and shape to the unfrosted portion of the tool perfectly. Also one other thing Ive found is that setting the tip of that tooth to the very top edge of the line (like barely touching it) provides best shift performance in most conditions. Great vid by the way. Cheers.
Thanks for putting this together. These are the clearest explanations and far and away the best visual perspective of exactly what is happening and why. Fantastic.
My brand new bike I got last year was shifting like an F1 car up until I had a bad crash about a month ago. Ever since then I have not been able to dial the derailleur back in. I got a new hanger which didn't help, I was about to buy a new freaking derailleur until I watched your vid. I do not have a chain gap tool but I set my distance between the cogs to 15mm (what other sources online said works well). Anyway doing that and then fine tuning by threading the barrel did the trick. She shifts like a race car again. The SRAM manual is horrible at explaining this.
Before I watched this video I was sad, but after watching it I am happy.
Thank you for making my life better.
this is by far the best clearest easiest to understand tutorial I have seen on SRAM derailleur adjustments..and I've seen a bunch! thank you... 👍👍👍
Best video I've seen on how to adjust Sram 12 speed
I adjusted my derailleur according to your method and it worked better than it was when it was brand new!
Great video!
Thank you!
This gentleman's guide should be on official SRAM's youtube channel!
Finally somebody who explained exactly what I was looking for!!! Thanks a lot
Ive adjusted my Eagle drivetrain multiple times with this video. Best video out there for this topic... easy to follow and actually works :) thanks
Excellent step by step for this, a lot of guys afraid to mess with the hi-low screws or go way too much without watching lower cage movement.
Best tutorial I saw till now. It explains a lot of possible flaws, other tutorials don't deal with. Great.
The best vids like this one always include the common mistakes made, very helpful.
Thanks man, as a lifetime user of shimano and now switching to sram MTB groupsets, this is really helpful
Best video for adjustment on the web.... Thank you so much, PLEASE keep posting bike maintenance tips.
Ryan Alexander agreed 👍
I want to thank you !! By far the best adjustments and great explanation and camera views . Finally got my setup smooth flowing! 🔥
Wow even for 5 years old this is great content. Better than SRAMS video in my opinion. I’ve recently learned how to do all this. Great skill to know
Great video Daniel. I couldn't get the shifting on my xx1 perfect like in your videos. I hope now I will.
Thanks for the great video, i’m a slow learner but with this video i finally understand 🤯👍🏻
Many thanks, best tutorial I came across. It would be helpful to understand how to deal with derailleur which are damaged, when to figure our if a new one is needed.
Thank you so much for this video, it really saved my day. I've watched several other videos about the basic setup of the sram gear changer, but with all the other videos I wasn't able to do a flawless setup. Since I set up my sram like shown in your video it works just perfect. Thank you so much for this.
I wish i had found this video sooner thanks!
I did the same mistake. But corrected it by listening to the chain noise that reduced only when i did fine tuning. So the noise tells you the story
BEST Video so far for setting the drivetrain!!! Thanks!!!!
The best video of adjustment I've ever seen !!
Followed this guide today on mine- did the trick. 2 slight changes for me:
a)I got a helper to sit on the bike while I was adjusting the B screw
b)I didn't have the SRAM guide tool, so had to do it by eye
Shifting beautifully now- many thanks.
Agree.... best tutorial I have seen for derailleur adjustment! Great job!
You are awesome 👏, even the the SRAM channel didn’t go through the adjustments in as much detail as you did :)
OMG thanks I was doing it wrong😅
Thank you so much. I hope this helps me get my new chain/cassette actually working properly. Not thrilled about the issues I have been havinh
@11:01 min - chain is not synced with cassette teeth in the largest cog. You can see the chain riding up on the cassette. The biggest pain in the ass with Sram eagle shifting.
only happens to me when its on the stand, no load.
Greg Knipe lucky you. That is not the case with me. Eagle is a great product until you start abusing it/riding fast. I’m guessing the long derailleur cage is super sensitive to vertical alignment. Never had many problems with 11 speed but I have been plagued with issues from racing enduro and bike park days.
@@bikeguy6800 I have a 50t ring, medium cage, 30t up front. I see there is an important difference here. thanks for the info.
Yup, that's the key, you got to release cable before high limit screw. Nice job, good video!
Excellent vid. Thank you. Your clear presentation is one of the best I’ve seen.
Very clear and detailed instruction ALL details shown clearly and NO stupid music best i have ever seen
Best video on youtube for settings!!👍👍
Agree with R.A. This saved me after failure with several other tutorials. Thank you!
No entiendo ni hablo ingles,y aun asi el video es excelente! se entiende muy bien y es muy intuitivo! Gracias y seguid asi!
Thanks, just what I needed to get my Eagle setup from good to perfect. Also thanks for the English narration, my only other language is very limited Spanish so I appreciate you taking the trouble to speak what is I'm fairly sure not your first language.
At 8:35 the B-screw adjustment is complete and shown with the plastic template gage from SRAM. This same dimension can be set with a caliper to 14mm for 1x7, 1x11, 1x12 speed (1x= single front chain ring) for example a X1 or GX derailleur will work too, not only Eagle with the same red-colored template or 14mm. See SRAM online, downloadable manual: 95-7518-008-100 Rev A © 2019 SRAM,, pages 21 -25
Great vid. One thing I was struggling with and didn’t see explained on other vids was adjusting the gap at sag level. Spent a lot of time trying to get gears running properly, once I understood this, worked first time. Thanks
Great video - love the colour of your chain and cassette. Thanks for sharing.
You my friend.....are my hero. THANK YOU!!
Awesome - was about to book my bike in for a gear tune up, but followed this video and now as good as new!! Thanks for sharing mate👍👍
Excellent video. I recently stripped and cleaned my GX Eagle cassette, chain and mech and the shifting was terrible when ir einstalled them. After watching this a few times the shifting is now perfect, and much better than before!
Actually, I would do BOTH limit screws before putting chain or cable on. Manually push the derailuer to the low gears and hold in place while adjusting the limit screw. Thats how the Barnett institute teaches the process.
Great vid man - that chain riding up on the 50T looks a little quirky though.
Thank you so much. I have just adjusted my drivetrain. I have the Sramm NX 11 and the video worked perfect for me.
lol , i was adjusting towards the bigger cogs .. THANX MATE. you saved my day
I got the NX Eagle without a crank.
I took a good mechanic in town for the installation, but noticed that the chain was visually too long, the COG 50 didn't "stretch at all" - but the detail is that her tension was perfect! and the feedback is also OK.
So in cleaning, I decided to check, and she was 8 links after the junction, making the standard measurement of COG 50 and crown .... I removed the 4 links ...
Out of curiosity, I went to see the feedback and to my surprise, I was very far from the COG and had to realign ... loosing screw B ... (flustering)
Until then, ok, but I noticed that the chain seemed less intended and to my surprise, get off the pedal and it seems that it is "beating" much more! more loose!
My logic is that with the long chain, bolt (screw) B needs to be tightened, pulling the gear and letting the chain much tighter!
But and now? return the 4 links and intend or use as directed? (google translator, I´m From Brazil)
Thank you so much now I know how to fine tune my sram gx eagle rear derailleur.
Thank you very much, this was extremely helpful. Even though I will be having the NX drivetrain installed, possibly with some GX components, this information is applicable across the whole SRAM Eagle line, as far as I'm able to discern.
Used this multiple times in the past few months. Thank you!
I appreciate the video and the detailed explanation It help me to set up the new sram sx groupset in my bike. Thank you so much!!
Thank you. Amazing video, very logical adjustments, very smooth!
There are a hundred other rear derailleur adjustment videos on UA-cam. Yours is the only one that starts the adjustment process on the low gear. All others start at the high (smallest) gear.
Fantastic! Great explanation of the different important steps. This is my go-to quick reference guide whenever I have issues with the finetuning of my Eagle drivetrain.
Thank you so much, best video out here to get this system adjusted!
Great tutorial, but you should probably mention that the first step is to make sure your derailleur hanger is perfectly straight, with the correct tool. If it isn’t the rest of the steps won’t stop shifting problems.
Love this video,now I can do it by myself.😎🤟
Much easier to adjust the b-gap with the tool if you have someone to help you, you can just sit on the bike and have the other person adjust the gap.
Perfect, thanks! My NX Eagle upgrade is dialed in now.
Thank you for this video I appreciate the knowledge imparted here 🙏
i learn a lot tutorial from you so my XX1 are pretty smooth.. kudos to this guy!
Thanks! Great vid for us new riders
Absolutely awesome tutorial - thanks very much!
As always explained really clearly.
Perfect timing, just had some trouble on a ride this weekend and needed these tips to get me straight. Thanks for the information. Ill get connected to your forum as well. I appreciate your channel.
Excellent video, you really helped me out with the adjustments of the rear derailleur. Thank you very much
Good video thanks, I’m installing the NX version over the next few days- it was interesting to see you didn’t Line it up exactly on the high gear. I bet you were delighted when your friend smashed your $250 mech,
Thank you for this video... I almost gave up and bought a new derailleur!!!!
Thank you this vid made my X01 Eagle Butter Smooth!
Great video, just what I was looking for.
Very good vid! Super detailed for all the tiny steps, excellent image quality. Congrats! Keep them coming.
Thanks , best vid ive watched today for setting up my new sram nx groupset ,never quite sound as smooth as yours but job done, much appreciated ! 👍🙂
Wow...gonna have to try this on my XX1 setup today. Totally new to bikes as I come from motorcycle background. I can build engines without problems, but this is like black magic to me. :D
It's easy ;)
For sharing your cycling moments join our group facebook.com/groups/sickbiker/requests/
For getting help and halping other join our forum.sickbiker.com/ :)
What a great video. Very easy to follow and clear instructions too. Thanks for posting.
Outstanding demonstration. THANK YOU!!
Thankyou very much as I’m putting on my xx01 new gears so I will bear in mind what you have said thanks.
This is very useful and informational video. Thanks bro!
Thanks new cassette is running sweet now very easy to follow video 👍
couldn’t thank you enough! definitely more detailed and easier to tune after watching your video/
Thank you, greats from Rio de Janeiro, Brazil!
Great video. Could you also add how to adjust the B-Gap without the proper tool ?
It's not so easy to find,. Having the B-Gap adjusted properly with the red tool, maybe with a caliper or a ruler, you could point exactly where and how much measure.
Thanks
Great video! Thank you!
Yep best vid to all the depth you need to know about fine tuning sram....
very well explained. thanks
really well done. hits all the points.
Why shall we not align the two centers?
Thank u so much, it helped me alot 👍🏻
...that's why you NEVER let your pals take your ride for a spin.
The gold chain looks amazing.
Такая счастливая регулировка - только в рекламных роликах!
Very good and helpful video!
Great video, thank you for taking the time to create the video and good luck with your forum and facebook.
Well explained, all the little details that are important nicely explained many ways to ensure understood. Good Job :-)
Thankyou I tryed alot videos and they ruined my bike but your a good teacher.
Thanks this video helped me set mine up after a crashed bad
Solid man, so
Doing it for my XO1 eagle 🦅, thanks
Great video.
Eagle is the worst gearing I've used for setting up.