Welcome back its like you have never been away. Beautiful flowers and the colouring is amazing. Thank you for sharing. Before I forget I was going to ask you:- Sometimes if I hold my petals on the iron they go hard I have tried on different settings If i go to low a settling they don't do anything. Thank you my lovely friend. Love ewes xxxxx
Thank you dear friend xxx Hope everyone could understand me :) I use silk setting on my iron and it works every time, but you can see when the petals curling up then it means that is enough
Hi Monika I have posted this with Lady E Designs, also so that a beginner can see and not make the same mistake. I couldn't understand why my flowers were not looking as good as yours and Emilia's. I worked it out last night I am using Silk and 0.06 thickness. This is ok for what I call Flowy flowers but ones that need more structure need a thicker one, even on Silk setting my Foamiran petals have either been going hard or melting. I hope you can help I will have to order a thicker one today. Hugs and loves xxx
I ordered some Crafters Companion foamiran yesterday so am now hoping it will be better. I went for the Chiffon and Silk for flowy flowers but then a 0.06 from Crafty Enjoyments for the more solid flowers like Roses. Hope you have a good work day. Loves and Hugs xxx
I like Crafter’s Companion foamiran. With silk you do not need iron at all and this foam is fantastic for bigger flowers. Never used Chiffon foam so can’t help you
Hi Monika the Chiffon is Amazing for floaty flowers. But I have only used it a couple of times. I payed for express delivery with Crafters Companion so will hopefully get it today or tomorrow. Love ewe xxxx
As I show on the video I use cutting die and run it through die cutting machine. You can also use a template and tooth pick to draw around it and cut with scissors
@@monikafras264 no, I only show how I cut pieces of foam, then I put the cutting die on the top and after that how it comes out of the die cutting machine. I just cut out that bit of video where I run it through die cutting machine as I thought it’s self explanatory enough. If you want to see that progress of running it through the machine I can do another video showing how to do it. Also I have another video in which I use craft punch to make foam flowers ➡️ ua-cam.com/video/ZS-jCO4TOpA/v-deo.htmlsi=00MnjXXCuO9hDN__ and another one where I cut it by hand ➡️ ua-cam.com/video/8CYoja0YEM4/v-deo.htmlsi=-TE6gzAzE6n-DiWs and another one where I use my own template to create an anemone flowers ➡️ ua-cam.com/video/6w0Q1YE2uc4/v-deo.htmlsi=q4e0IWlKMcWYaXqt and the whole foamiran flowers playlist ➡️ ua-cam.com/play/PLzEMmMAlWi0IJEfBCohQwj5Rk2UIyDAER.html&si=Yvo5uXym2WLNLz1c Let me know if you need any more info and I’m happy to do it. Happy crafting ❤
![How To Make [CREATIVE] Foam sheet Temple flowers at home | DIY - Foam sheet craft ideas[PAPER HACKS]](http://i.ytimg.com/vi/52gkm0mGJZs/mqdefault.jpg)
Your flowers are very pretty. I had made some quite a while ago and I needed a refresher, and your video helped me a lot. Thanks.
I'm so glad! Thank you for your kind comment ❤️
Excellent demo
Thank you so much ❤
I just bought a load of foam sheets so watching your video really helps. Thank you. I am a beginner.
Glad to hear it. Any questions just ask and I will try to help or record appropriate video. Happy crafting x
@@MonikaWeclewskaakapaperMona thats very kind of you. Thank you
So pretty 💕love the colour of these flowers❣️. Thank you xx
Thank you so much Linda xxx
I love them ❤
Thank you o
Wow they are awesome
Thank you so much xxx
Welcome back its like you have never been away. Beautiful flowers and the colouring is amazing. Thank you for sharing. Before I forget I was going to ask you:- Sometimes if I hold my petals on the iron they go hard I have tried on different settings If i go to low a settling they don't do anything. Thank you my lovely friend. Love ewes xxxxx
Thank you dear friend xxx
Hope everyone could understand me :)
I use silk setting on my iron and it works every time, but you can see when the petals curling up then it means that is enough
We can understand you no problem. I will try that later on. Thank you. Hugs and Loves xxxx
I just use my curling iron...forget the bulky iron!! Enjoyed your video
Thanks, I personally prefer iron 😃 but there are other ways to heat foam
Super sister 👌👌👍👍
Thank you 😊
❤❤
❤️
Hi Monika I have posted this with Lady E Designs, also so that a beginner can see and not make the same mistake. I couldn't understand why my flowers were not looking as good as yours and Emilia's. I worked it out last night I am using Silk and 0.06 thickness. This is ok for what I call Flowy flowers but ones that need more structure need a thicker one, even on Silk setting my Foamiran petals have either been going hard or melting. I hope you can help I will have to order a thicker one today. Hugs and loves xxx
Hi Wendy, it sounds like you have the wrong foamiran. I will look for it and send you a link via messenger
I ordered some Crafters Companion foamiran yesterday so am now hoping it will be better. I went for the Chiffon and Silk for flowy flowers but then a 0.06 from Crafty Enjoyments for the more solid flowers like Roses. Hope you have a good work day. Loves and Hugs xxx
I like Crafter’s Companion foamiran. With silk you do not need iron at all and this foam is fantastic for bigger flowers. Never used Chiffon foam so can’t help you
Hi Monika the Chiffon is Amazing for floaty flowers. But I have only used it a couple of times. I payed for express delivery with Crafters Companion so will hopefully get it today or tomorrow. Love ewe xxxx
@@WendysCraftDen
How you cutting your flowers?
As I show on the video I use cutting die and run it through die cutting machine. You can also use a template and tooth pick to draw around it and cut with scissors
@@MonikaWeclewskaakapaperMonaActually you are not showing the cutting process.
@@monikafras264 no, I only show how I cut pieces of foam, then I put the cutting die on the top and after that how it comes out of the die cutting machine. I just cut out that bit of video where I run it through die cutting machine as I thought it’s self explanatory enough. If you want to see that progress of running it through the machine I can do another video showing how to do it. Also I have another video in which I use craft punch to make foam flowers ➡️ ua-cam.com/video/ZS-jCO4TOpA/v-deo.htmlsi=00MnjXXCuO9hDN__
and another one where I cut it by hand ➡️ ua-cam.com/video/8CYoja0YEM4/v-deo.htmlsi=-TE6gzAzE6n-DiWs and another one where I use my own template to create an anemone flowers ➡️ ua-cam.com/video/6w0Q1YE2uc4/v-deo.htmlsi=q4e0IWlKMcWYaXqt and the whole foamiran flowers playlist ➡️ ua-cam.com/play/PLzEMmMAlWi0IJEfBCohQwj5Rk2UIyDAER.html&si=Yvo5uXym2WLNLz1c
Let me know if you need any more info and I’m happy to do it. Happy crafting ❤
Please can you tell me. Do you need to seal the ink to Stop it coming off on your fingers at a touch ? Thank you .
Fantastyczne kwiaty 😍🥰 Prześliczne 🥰 Pozdrawiam ☺️
Dzięki, ej bo ja nie dam rady odpowiedzieć na te wszystkie komentarze 😁😂
What colour ur using mam?
Beautiful, what are you putting around the stamens to pull them through the flower?
Is a thin wire, which helps pulling through the stamens
The shape which u used to cut how can I odder that
❤❤❤❤❤😊
😃 thank you
Colour name