Hey! I got a 2003 thundercat last year as my first bike (didn't know it was going to be a project at the time, but oh well) point being I fixed it up quite a bit and now I ride it almost everyday to work! CAREFUL with the clutch side Ebay lever!!! It can slip down and hang on the housing causing the clutch open a bit. Scarry stuff. One correctly sized washer (idr the size) on the lever bolt, between the lever and housing is the EZ fix 👌🏿👌🏿👌🏿. GL man ✌️
Ethanol in the gas wreaks havoc on my Tcat every 2nd season when I put it away for the winter. Did a complete rebuild 2 years ago and now I have cylinder 3 not firing due to carb issues. Probably the jets are clogged. Not looking forward to tearing into the carbs again.
cant even get my carbs off on my 03, the point where the carb connects to the seal, cant see the screws to loosen and the bolts holding the seals on the bike arent reachable🙄
These videos are great.. One question, what are you taking apart at 5:24? I am im the process of cleaning my carbs on the thundercat.. waiting for parts.. don't remember taking that thing off lol thanks for the video if i don't hear from you watched the entire thing :)
I know this is 9 months later lol but I think I might need your help. I’ve replaced a lot and still won’t start. Can you help? my bike is also a zyf600r
what’s up man I have a 2000 yzf 600r, and it runs and idles good, shifts good, but it won’t go past 105 mph for the life of me bro like full throttle open highway, 3rd 4th 5th it just won’t go past 105 and 8k rpm in 4th upshifting from there is pointless
I don’t usually check the level on this style float. They are adjustable but typically if the level is off you replace the float. The repair manual is the best place for the float level I don’t know that info. Good luck with the kitty Kat!
Love the thundercat theme tune to start the episode! Ive wanted one of these bikes for years
Great video my friend! Just what I was looking for 👍
Hey! I got a 2003 thundercat last year as my first bike (didn't know it was going to be a project at the time, but oh well) point being I fixed it up quite a bit and now I ride it almost everyday to work! CAREFUL with the clutch side Ebay lever!!! It can slip down and hang on the housing causing the clutch open a bit. Scarry stuff. One correctly sized washer (idr the size) on the lever bolt, between the lever and housing is the EZ fix 👌🏿👌🏿👌🏿. GL man ✌️
Thank you very much for your video on the yamaha thundercat carburetor it helped me a lot to restore the carburetor of my motorcycle 👍🏻👍🏻👌🏻👌🏻👌🏻
Well done , i had 1997 blue and white amazing bike .waiting for next video
I had a red/white 1997 bike. Great motorcycle.
Ethanol in the gas wreaks havoc on my Tcat every 2nd season when I put it away for the winter. Did a complete rebuild 2 years ago and now I have cylinder 3 not firing due to carb issues. Probably the jets are clogged. Not looking forward to tearing into the carbs again.
Thumb up just for the theme
Awesome vid. Just bought my second bike ever it’s a 98 Yzf600
That’s crazy I’m thinking bout getting a 98 gonna be my 2nd too first Honda shadow1100 94
@@princedaziowilliams94443yrs later I got a 98 yzf600. Started on a 06 shadow 750
Thank you saved my life
cant even get my carbs off on my 03, the point where the carb connects to the seal, cant see the screws to loosen and the bolts holding the seals on the bike arent reachable🙄
These videos are great.. One question, what are you taking apart at 5:24? I am im the process of cleaning my carbs on the thundercat.. waiting for parts.. don't remember taking that thing off lol thanks for the video if i don't hear from you watched the entire thing :)
Where is your work shop
How are the coils and wires set up on your bike
Hello thank you I am Turkey from thank you thank you 👍👍👍
Learn engwish
Just got a 2001 yzf
Hello, do not tell me what level to line up in the float chamber. If measured with a barbell?
How did you take out the gas jets? Was it with a screw driver?
Did this fix the over 70 mph problem?
I know this is 9 months later lol but I think I might need your help. I’ve replaced a lot and still won’t start. Can you help? my bike is also a zyf600r
Wheres the choke on a 2001 yzf600r
Bro can I get clutch assembly for this
Is it possible to not have mixer screws?
They are hidden under a cap you have to bust out
What kind of exhaust is that ?
It’s a delkavic slip-on
what’s up man I have a 2000 yzf 600r, and it runs and idles good, shifts good, but it won’t go past 105 mph for the life of me bro like full throttle open highway, 3rd 4th 5th it just won’t go past 105 and 8k rpm in 4th upshifting from there is pointless
if you have any ideas I’m open to it seriously! Thanks!
also where’s the best place to run the fuel pump positive lead like mine has no connector no nothing 😂
What jet kit did you put in it?
I installed a Dyno jet kit stage one
How do you know how many cylinders Are running?
Just check the exhaust system pipes if they so hot ad even with water
What height would you have the float ?
I don’t usually check the level on this style float. They are adjustable but typically if the level is off you replace the float. The repair manual is the best place for the float level I don’t know that info. Good luck with the kitty Kat!
@@MattsMotoWoRX thank you
Is everyone on the yzf600r Facebook Group???