Це відео не доступне.
Перепрошуємо.
MK5 Golf Cruise Control Install / Fitting - VW Caddy, Jetta, Touran, Tiguan, Scirocco, Skoda Octavia
Вставка
- Опубліковано 30 жов 2013
- You can purchase this kit from; www.vwdirect.c...
or have it fitted at our workshop in Skelton, TS12 2LQ
Fitting Cruise Control to a VW MK5 Golf
This Golf also required the ECU wire to be installed, available on eBay; ebay.us/zxsGD3
The procedure is the same on all these vehicles, although the wire is only require on early models
MK5 Golf upto June 2010
Golf Plus upto June 2010
Eos upto November 2009
Caddy upto November 2009
Jetta upto June 2010
Touran upto June 2010
Tiguan upto June 2010
Scirocco upto November 2009
SEAT
MK2 Leon upto June 2010
MK3 Toledo upto June 2010
Altea upto June 2010
Skoda
MK2 Octavia upto June 2010
MK2 Superb upto June 2010
Yeti upto June 2010
I prefer a video in which someone just walks around his car, or shows a video of his dash, after having installed the cruise control.... said no one ever.
Very good video. Thanks for links to the kit.
The problem is that cruise only works whilst driving & we cannot film whilst driving, unless I bring an employee with me
My base model 2007 VW Caddy has cruise control, ASR/ESP, power windows and mirrors, headlamp adjustment button (which is handy as I've lifted my van a couple of inches) and air-conditioning, no heater as its not needed where I am, in Australia. The first owner was a small business owner and must have had the options included for his comfort
Thank you. Saved me a lot of trouble!
Excellent! Thanks for sharing this with us. Just done mine - it worked a treat.
Ian Hollinshead Thanks for the comment
this video was really helpful for me. Thanks a lot!!!!!!!!!!!!!!!!!
Alicja Bilska Thanks for the comment
You made my Day !!
Thanks really helped!
Thanks for sharing this - am now certain this job is not for me 😅
Merhaba hangi pinleri kullanmamız gerekiyor. yardımcı olabilirmisiniz?
thanks teeside excellent video
TheSootpig Thanks for the comment
I have a 2011 Skoda Yeti ( J623-CLCB) I have changed the stalk and slip ring and coded too but CC does'nt gets activate what would be the issue ???
We have replied to your email
Good video very clear
Thanks
hey... can i install it on my golf 5 gt 1.4 tsi 2008 ..? i dont have any cruise control ... and i dont have any functions on my steering wheel.. can you help me please ?
Yes, this kit fits all MK5 golf's upto 2009
Hello there, thanks for the installation guide, I wanted to ask what wire and wire pins did you use in this modification. I have cruise control handle, so i just need the wire and pins to buy. Can you tell how those pins are named or what are their specifications. Thanks
The Wire is provided by VW in their Genuine Kit.
You can buy them on eBay ebay.us/zxsGD3
very good useful video, just wondering is this similar process for 2005 sharan, or do you have a video for that too.
It's dead easy on sharan
+abdurrob21miah Contact us at support@vwdirect.co.uk with the VIN / Chassis Number & we'll quote you a price
Apparently you can access the blue plug from behind under the steering wheel. No need to remove stuff in the engine bay.
This is incorrect, as you have the locking bar holding down all the connectors @3:56 & then each connector has it own locking strip, so it would be impossible to insert the wire without removing these first.
@@VWDirect-01287-555055 It makes sense but I found a German tutorial that says it otherwise. Must be wrong.
I will try to upload somewhere the pdf if you are interested.
@@kevin.afton_ MK4 Golf doesn't have the locking bar, you can send it to support@vwdirect.co.uk
@@VWDirect-01287-555055 Thanks for the info, I rechecked it, it does look like its for MK5.
I sent the pdf to you.
Edit: I found it says its only up to 2006
(nur bis Modelljahr 06)
Impossible, as there is 2 bars blocking you, from inputting the wire into the connector, without removing it first
Hi this was great thanks do you half to carry out programming after? Also how would you go about this my car does not read its mpg never has is it a matter of changing to the appropriate stalk and program it?
Thanks
joseph dowds Yes, VCDS is a popular option for coding & code after installing & clear fault codes. The Fuel Computer would require the Dash Cluster with the LCD Screen & DIS Wiper Stalk
Thanks a lot. Its clear about cruise control. Is it the same procedure for on board computer too? I have VW that doesn't have board computer, so the question is after installing a stalk that supports board computer will it work? Thanks in advance.
Which Vehicle?
so I guess wipers need to be removed for the wire installation. Is that black cover under the wipers glued in place? So I would have to glue it back on?
Yes the wiper arms need to be removed & the cover has 3 x 10mm nuts holding it on
Hi, can i install that on 2009 (Skoda octavia 2 TDi 1.9 AT) kindly suggest.
+sujit sharma Yes 2009 Octavia OK, contact us on support@vwdirect.co.uk
does this car originally have cruise control?
can I install that on a 2014 North American Jetta?
+Ahmed Erfan contact us at support@vwdirect.co.uk with the VIN / Chassis Number & we'll quote you a price
Hello i did install GRA Cruise for VW Tiguan, cruise shows in dashboard now but not working getting error below:
error: P056800 Cruise Control System(CCS) switch/Range performance
Any help please?
Either you've not coded both Engine & Steering Wheel or the wiring is missing
Hi, brilliant video, I have a vw golf gt TDI 2.0 58 plate. Will this already have the wiring set up?
Yes a 2008 model will already have the wire
Excellent video! Is it possible to install this on a Caddy 2.0 EcoFuel 2010? (i know the description only says "Caddy upto November 2009")
Send the VIN to support@vwdirect.co.uk & we will check for you, as depends ont he build date & newer models require a combined Stalk & Slip Ring
@@VWDirect-01287-555055 Awesome, thanks! Will do. :-)
What kind of pin did you use for wire at the modul and ecu? Pictures pls. Thank you
The Wire is provided by VW in their Genuine Kit.
You can buy them on eBay ebay.us/zxsGD3
Thank you
My Leon has a black and white wire in the terminal on the steering module ? Any ideas I have changed the steering control module and put the stalk on also another steering wheel to control the audio . So do the engine ecu and the squib ring have to be programmed. . Or do I replace this wire
Yes the steering wheel module & ECU require coding.
As per our conversation on eBay, if you have the ECU wire, it doesn't need replacing
does it works on audi a3 8p 2004 1,9 tdi?
+Nerijus Dimsa 2004 Audi A3 uses a different kit, contact us on support@vwdirect.co.uk
Hi can you help where the wire go from pin 13 to where? many thanks
sorted.
+carlos silva 3mins into the video
Are the mk5 like the mk4 as in the diesels are already wired for cruise control or do all mk5 need the wiring added? I have a 2005 2.0 GTTDI (engine BKD)Golf plus I want to add cruise control too.
Most early 2004/2005 MK5 Golf's are missing the wire, check PIN13 of the black connector on the steering module, although we do include it our kits, available on vwgolfr32.co.uk/shop/CCS-MK5-Golf.htm
If it is there would this mean it's just 'plug and play'?
I've just ordered kit from you.
Dan All Great service guys.. my kit turned up today.. very quickly!
Dan All Thanks for the comment
Hello Friend.
I installed the tempomat in my golf 5 tsi.
I put the codes in engine and steering wheel with vag-com.
Still, it does not work. My car already has cable on pin 13, I should go!
Can you help me please?
Presuming you've fitted a New Genuine VW Stalk?
Have you used the measuring blocks to see the Stalk working along with the Brake / Clutch Switches?
i have a red steering wheel warning on my golf no power steering, steering went when i tried to start the car after shopping it failed to start first time and this fault appeared any ideas cheers
Try turning the steering wheel lock to lock & hold it at each end for 10seconds, to see if just needs to learn the end position. If that fails, you'll need it scanning to read the fault code & it maybe 00778
Hello, do you know how to install new cruise control on vw tiguan 2016, when I bought new part with cruise control from vw on the package came two levers control with cruise control, stering wheel modul with stering angel on it together and a wire, do you know if I need to use this wire on this model and most difficult thing is coding for this model, if someone has experience with this thing will be helpfull for me thanks
Slightly different fitting & PIN5 on the slip ring needs checking for the ECU Wire
Tiguan will not require the ECU Wire
Mainly 2009 VW Golf Cabriolet & Passat require it
Hello, my car accepted coding with VCDS, I have installed the stalk, but now I have to find the pin output directly in the Ecu. Any help with which pin it is? @VW direct
As per the video the Control Wire plugs into the blue connector behind the wiper motor housing.
Have you checked the wire is not already in place on PIN13 of Steering Module?
Ensure that the Steering Module is Cruise Compatible & that the Steering Module & the ECU are correctly coded.
If all correct, then use the Measuring Blocks to see where the problem is
wiki.ross-tech.com/wiki/index.php/Checking_Cruise_Control_using_Measuring_Values
hello to all i want to install Cruise control on my car vw golf mk5 gti 2008 i have mfsw and big screen can i fitted? I don't now if i have high line - mid line or low line
MFSW = Highline, although not all Highline modules are Cruise compatible
To VW Direct, hello Sir, I have 2012 vw caddy maxi van, could you tell me who can fit that for my van also I need electric Windows, I live in north London, Thank you Sir.
email us your vehicle details; support@vwdirect.co.uk
Would a 15 plate Tiguan be wired up ready to fit stalk. ?
2015 Tiguan requires a completely different stalk & a Slip Ring. No wiring required.
We currently sell the part for £254.10 inc UK Delivery or £300 fully Installed at our workshop in Skelton, TS12 2LQ
If I have a cruise control on my MK5 Golf GT is it just as easy as taking old one out put the new one in? no need for extra wires ?
Yes, it is just as easy as that
VW Direct hello I have 2012 vw caddy maxi van, could you tell me who can fit that for my van also I need electric Windows, I live in north London, Thank you Sir.
ugur savas kilic email us your vehicle details to support@vwdirect.co.uk
Hi, the cruise control on my Skoda Octavia 2005 has stopped working few weeks back. Could it be cruise control sensor? If yes, where is it located? Any suggestions!!!
If you have VCDS, check for fault codes & if none, check the Brake & Clutch Switches via Measuring Blocks; wiki.ross-tech.com/wiki/index.php/Checking_Cruise_Control_using_Measuring_Values#Checking_Cruise_Control_using_Measuring_Blocks
More likely the switch. See: www.briskoda.net/forums/topic/304732-cruise-control-intermittent/
+William Newman Using the measuring blocks will show if the Cruise switch is working, along with the Brake/Clutch switches
i have 2010 vw jetta 1.6tdi jetta primeline dsg. İ use 1k0....ch module and 1K0953513G stalk. İ ve don the require coding on vcds but i get implausible signal error. on vcds. on mf display, on car have err message on the right of the cc symbol. İt can be a problem with cruise control stalk?
Did you use a Genuine VW Stalk, as there is a lot of Fakes, that just don't work or fail after a short time.
Also have you coded the ECU & Steering Module.
You can also use Measuring Blocks to see the Cruise Stalk Buttons working
thanks. Stalk was not working. On of switch hasnt work. i use Measuring blocks to see it. İ bought a new stalk.
Ok 👍
Is it possible that my VW Jetta 2005_1.9tdi bkc doesen't support a Tempomat (c.control) ?. I don't have a blue connector in box.
If you don't have the blue connector & no wire in pin 13, the ECU Wire will need running directly into the ECU
@@VWDirect-01287-555055Do you now maybe how to do that? Thanks
@@markowolf9540 I presume you do not have a wire in PIN 13?
Exactly the same method as shown in the video, except you run the wire along to the ECU.
If you're buying the parts from us, let us know & we can include the correct wire.
The pin out will be on the circuit diagram available from the Erwin Volkswagen Website
Can i use this video for the Golf 6 retrofit?
DVVFane Yes, contact us at support@vwdirect.co.uk with the VIN / Chassis Number & we'll quote you a price
Hello mate i want to install Cruise control in my car golf 1.9d 2006 ive gone to volkswagen and they say that they charge 200 dollars just to see if my car takes Cruise control, but according to some it seems like any golf from that year takes Cruise as long as you change out control module, or am i wrong? I would apreciate if you answer please. And if you dont know the answer, is there a way i can find out on the internet if my car takes cruise.
My car has a display that shows how much diesel it consumes, it shows how many kilometer i have left in the tank, shows temperature and so on.
Mate i would really apriciate if you could help
If you have the Trip button or a MFSW, then the Steering Module is a Midline/Highline which most are Cruise compatible. Even if it's not compatible, then you can buy a used module & swap them out.
If you know the part number of the module then you can look it up on Ross Tech Wiki; wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions#Part_Number_1K0-953-549
We've never come across a MK5 Golf that is not Cruise Compatible, some just need more parts & Early 2004/2005 models require the wire as per the video.
VW Direct okey my friend, thank you so much. I Will do as you say. Youre awesome
I dont have trip button and dont know what is MFSW... what i need to do if my golf mk5 isnt cruise control compatible? Can i just change that lever or must install something else?
how works it on a golf 6 1.4 16v?
email us your vehicle details; support@vwdirect.co.uk
Hi. I have a Caddy 1,9 TDI BJB I have followed your instructions. I checked the coding on the controll unit and it is ok but is still does not work. Any ideeas?
Same problem here, but I have a Caddy 1,9 TDI BLS. The wire was already installed.
You had to activate via vagcom
What is the part number of the steering wheel module & Have you coded the ECU & Steering Wheel
What is the part number of the steering wheel module?
hello. my ecu is different from this one (03G 906 016 AQ) and the wire at pin 13 is missing. can u please tell me which pin of ecu must be connected with pin 13 of steering modul? thank you in advance
gezim kola The wire does not actually go-to the ECU on the MK5 Golf. Only between the Steering Module & connectors under the wiper motor
Maybe I was not correct, but I meant the connector you mentioned. In my case I don't have a blue connector. I installed the switch, made the configuration, and know I've error (vcds scanning) 02071-Local databus 004-No signal/communication - Intermittent
gezim kola what is the vehicle model & year?
vw golf v 2.0TDI BKD, 103kW, year 2005
gezim kola You should have the blue connector in the box behind the wiper motor on a 2005 MK5 Golf
I used Delphi software and entered code for cruise control activation. But my steering control module I've fitted I need the codes to access and set it up as I have no wipers indicators horn. . Any ideas where these can be obtained?
Use the original coding & change the appropriate digit for cruise
VW Direct on the used control when I go to enter the unit it's asking for a code to access it?
Do I have to read the old unit before programming the new one?
Hi , Seat Leon 1.9 tdi BXF 2008 engine requide wiring ? Thanks in waiting.. 🤗
No
No wiring required
Is vw caddy compatible for 2005? do you need any coding vag com?
Yes, coding is required
VW Direct Are the pin inputs the same for vw caddy? 13. pin for steering, which pin for ECU? I'm glad you're a helping hand.
Hi could you please advise, Suitable cruise control system required accessories for VW tiguan chassis no. WVGCE15N49W079378. Its too hard to get advise here at United Arab emirates.
It is the 2009 model.
Yes we can supply the correct kit, please contact us on support@vwdirect.co.uk
What year was this actual car? I have a 2008 model, so I'm being told that I don't need to do the additional wiring for my car. I just wanted to know how true that is.
I just bought the stalk
eM Yes that should be correct. Only the early 2004/2005 MK5 Golf's had the wire missing. The Golf in the Video is a 2004 model
VW Direct thanks for the speedy response