FactionFab How To Install Wheel Spacers

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • Tips and tricks when installing wheel spacers on your car!
    Tips start at: 2:09
    www.factionfab.com
    Facebook: / factionfab
    Instagram: / faction_fab

КОМЕНТАРІ • 4

  • @zionnoiz9219
    @zionnoiz9219 4 роки тому

    I do have a question , i recently bought some spacers from you guys. But I’m noticing the rim doesn’t sit flush with the spacer is that a problem? I am having a little shake in my steering wheel.

    • @factionfab5834
      @factionfab5834  4 роки тому +1

      The most common problem is due to the spacer thickness in relation to the stock wheel studs and your wheel choice. On the smaller thickness bolt-on spacers, the stock studs can stick out past the spacer. Some wheels have pockets on the back side of the mounting pads where the stock studs will go, but if the wheel has a flat mounting pad this could result in the wheel not sitting flush against the spacer. If this is the case, we would recommend going up in thickness to the 25mm spacers. It is NOT safe to drive your car if this is happening and I would fix or remove the wheel spacers ASAP.
      If this is not the case, it could be a hub bore diameter problem or another issue. Feel free to email us at sales@factionfab.com if you want to talk more details.

    • @zionnoiz9219
      @zionnoiz9219 4 роки тому

      FactionFab what’s the actual email address . I tried to email and it didn’t work

    • @factionfab5834
      @factionfab5834  4 роки тому

      ​@@zionnoiz9219 The address listed above is correct, but if you're having a hard time you could also hit us up on our instagram, faction_fab or on facebook too!