What I've added to my Speed Twin (and a question for you!)
Вставка
- Опубліковано 28 кві 2020
- Here's a quick overview of the things I felt my 2019 Triumph Speed Twin needed right away, and my rationale behind them. While it's true that the customization rabbit hole has no bottom and a decat, throttle spacer, and better tires are in my future, I am happy with how the bike is right now.
Follow me on Instagram or else my dad will beat up your dad: / van_blamm
#waitfaster #speedtwin
...................
Music Credit: LAKEY INSPIRED
Track Name: "By The Pool"
Music By: LAKEY INSPIRED
Official SoundCloud / lakeyinspired
Official UA-cam Channel:
/ @lakeyinspired
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0)
creativecommons.org/licenses/...
Music promoted by: Chill Out Records @ goo.gl/fh3rEJ
www.ChillOutMedia.com / www.LoFi-HipHop.com - Авто та транспорт
Thanks for showing the SW-Motech mounting bracket! I didn't know that you can take them off so easily. I will now consider buying them.
I think they look fine on the Speed Twin, too. They are not 100% in style, but close enough.
And shout out to Classicbike Raisch! They are just a few kilometers away from where I live. Very friendly guys with a lot of experience!
Like your channel, what a beautiful bike and a great sound, like the video and editing quality too.
Subscribed.
Great video. Love the blaze saddle bags, I converted my old set from my nc750x and they look the same although fit slightly different. I feel your pain with the tank pad situation, I opted for small clear gel pads and stuck them on in my own design. They are hardly noticable and I can live with them rather than a marked tank. Keep up the good work.
If you have to have them then go clear. I have a speed twin too so I'm interested in what you've added so far
Thanks Terry
Good tip on indicators, I think the bags look ok
Nice video, glad you're able to put some miles on the bike during these lock-down times. Not sure about any pads on that lovely tank (although the seam welds are not great). Personally I'd leave it alone. I have a Dart fairing on mine, since doing a few miles cruising at 80mph it helps take the wind off a bit. YMMV as they say. I also use a Beeline sat nav, as the handlebar vibes killed my iPhone camera (twice).
Great video fantastic bike same colour as mine stay safe 🇬🇧👍🏻
Hi Elliot
Great videos, I have just collected a ST 2022. Keep up the good work.🏁☀️ You make it interesting to watch. Well done. 👍👍
Great video👍
Got a speed twin last year and love it, silver is the only way to go.
Xpipe from tec bikes is a must and sounds amazing with the stock cans.
Tail tidy, bench seat and ceramic coating and thats all im doing to mine.
Personally i hate the look of the American turn signals.
Clear tank pads✅
Decat ✅
Nice pipe/s to let the bike breath with the k&n filter
Can’t wait to hear a video
Got the same bike, same colour, tail tidy, bench seat, black intake covers, headlight bevel, V&H + decat. Perfect for me, personally wouldn’t bother with power commander and tank pads but each to their own. Just need to be able to ride it now.
If it makes the bike better to ride, stick those grips on the tank. Nice content. I did the Arlington and then Alexandria to DC commute for years when I worked downtown. Best way to get in and out of the city and "free" parking.
Really liking this channel! In general I like the knee pads but agree with others that it doesn't work with most Spd Twn color schemes. Nice to see someone not paranoid about others seeing their license plate - never could understand that hangup. Have you looked at DNY Tuneworks for future upgrade (and video)?
Thanks for sharing the video. It would be really helpful if you put a supplier link to items you purchased.
I personally would go with a dyno type power commander thing as it messes around with the bikes brain/electronics and 'could' cause problems in the future (which I see all the time on bike forums) I'd go with a Booster Plug, it smooths everything out, its cheaper and you can always take it off, doesn't need remapping or a dyno. X pipe is a good move too as it liberates some power and breathing is improved with the bonus of making your stock exhaust sound much more fruity.
Dart fly screen and a throttle spacer kit are good adds
I have another video on the throttle spacers for this bike. Definitely a worthwhile upgrade.
ST1200 and Kriega 30L here on every trip. Sometimes even add a backpack on top of the Kriega. Highway and mountain roads with zero issues. I like that side bag supports, but don't like the side bags. Hate even more horrendous side racks. I wish those discreet side bag supports would have more models and compatibility. Prefect for me would be the sw-motec legend gear to compatible with that Blaze support arms.
cheers
You nailed it, Legend bags on Blaze supports would be perfect
Hmm......agree...I have a Legend Gear mount on my Scrambler but it does not work as a permanent fixture on the Speed Twin. I think the Blaze bags are better than I thought, kinda vibe with the "modern" of the modern classic. I have added an X Pipe (British Customs) at my first service, probably a want rather than need - certainly smooths the throttle response, adds audible value but also (I know it's logical) enhances the fumes ;). Will meld nicely with a black Predator pipe down the line. I have a tank pouch bag coming from Trip Machine Company (their saddlebags are cool as reviewed by Stuart Fillingham), and would love the Union Jake radiator cover from Motone..... so much goodness in the Speed Twin and in your channel!
I strongly considered the Legend Gear as well, but that setup was a bit more expensive and the pictures made it look like it might not fit with these darned US 3-in-1 indicators. I'm very happy with the Blaze bags though. Sounds like you've got a sweet setup on your Scrambler!
Talk about the suspensions in your next video bro..😜
I have a lot of friends with the clear ones and they get rather yellow over time. I just decided to get some black sheets and am cutting them to match the Black painted area.
Hmm, that yellowing would bug me. I wonder if it would still happen to a bike that doesn't stay parked in direct sunlight.
Just bought speed twin with red tank going tomorrow to pick up 😁
Congrats
Small wind screen would be good, like on the Street Cup, silver spoked rims from the 2019 Thruxton R... that would make the Speed Twin amazing
Y'know, I've never felt the need for a windscreen, and I personally don't care for spoked wheels on modern Bonnies, but the fact that those options exist is what's so great about these bikes -- endlessly customizable!
I was thinking you added an Ohlin suspension kit ( front forks included ) and double Brambo disks kit for the front wheel ( The new 2020 comes with it... maybe you can make them retrofit yours ).... The license plate holder was way down the list of our guesses...
I never ever comment on videos but I love how you did yours. I got a ST in September. Unfortunately I added a lot to it. hahaha. I am in the Richmond area. I am curious where you are located since the roads look similar. I had been thinking about the panniers/bags/junk holders. Good job on the video!
Hah, I'm honored! I live in downtown DC, but this was filmed on 340 and 33, heading through Harrisonburg into WV. Thanks for watching!
VanBlamm I have a billizion parts on mine so ask if you are thinking about anything
I have a 2019 speed twin as well (same color). And I also love tank grips. But I have to cast a "no" vote for them on the Speed Twin. Unless youre dragging your knee through the canyons, I say don't sacrifice the look of that classic beautiful tank. You may think about putting some small leather patches on the inside thighs of your riding pants. I find a leather contact patch will grip the tank reasonably well.
Thanks for watching and weighing in! I think you and others have successfully steered me away from the tank pads. The patches you described sound clever, I'll look into that.
I like you and your bike from Bangladesh.
Thanks!
It's a great bike. One of my faves. I see nothing objectionable to tank pads
Knee pads only look good with the all-black version, on the black version I think they actually improve the looks. They definitely interrupt the design on the silver and red, but you have to decide if you prioritize form or function.
You're right about the looks. I'm going to put down a few more miles before I make a decision. Thanks for watching!
Great Video! Are you not afraid of the vibrations in the handelbar that could effect - maybe destroy - your cellphone? What do you think about navigation with a Beeline device?
Thanks! No, it doesn't worry me and I've never had a problem, but I'm still using a Pixel 3. I think as phones get more advanced, they get more delicate. Whatever my next phone is, I probably will not mount it to the handlebar. I hear nothing but good things about beeline!
I have a Speed twin In Red and love it. It's not hate but i'm out on the tank pads.
Yeah I've started to lean away from that idea
My tail light is different in Canada? Huh... The more you know. Mine have the american style bullet turn/stop signal lights AND the middle light from the European version. Kinda wish i had that dope metal plate thing.
How interesting! I didn't know they were like that up there.
Try them on the tank for a month to see how they work for you, if you don't like the look stick them on your inside knees.
You can get a rear rack...... PreviewPreview4:16Triumph Speed Twin Accessories | Hebco and Becker rear ...
I had considered a rear rack, and people seem to really like the H&B. However, it too is incompatible with the American turn signals, and I personally don't like the look of a rear rack that protrudes beyond the fender. Thanks for watching!
Great video. I went for a RE continental gt and to me it is also a great machine. Check out Motone Customs for accessories. I would suggest a monza cap instead of the stock fake monza + plastic. Ride safe ! Cheers from France
whats the model of the ram bolt that you have on the handle bar for your phone ?
I use this one: www.revzilla.com/motorcycle/ram-mounts-handlebar-bolt-ball-with-hole-base?sku_id=869087
thank you !! ride safe
Which bike should I get. The speed twin or trident? This will be my 3rd bike
That's a nice dilemma to have! Depends on if you want more tech and agility (Trident) or more torque and personality (Speed Twin). To me, sport performance is something I can only take advantage of in certain situations, but I can enjoy character at all times. One my my favorite traits of the Speed Twin is that it's fun to ride at any pace. The Trident is a truly excellent machine when you get on it, but at around-town speeds it feels like any other middleweight sportbike IMHO.
@@VanBlamm yeah, I will also ride my wife on it every now and then. We don’t have many dealerships around here they sale triumphs. One used to but they don’t anymore. The closest is about 2 hours away.
@@VanBlamm I finally got to see the 2020 speed twin that is silver. They much nicer in person than on UA-cam or pictures
What make is that helmet please?
It's a Shoei RF1200
I'm not sure you have to tune it on a dyno after replacing the exhausts. I'm just about to replace my stock ones with a TEC 2-1 RAIDER and read somewhere that Triumph's have an adaptive ECU since 2016, so I hope my Twin will tune itself to it automatically.
I've heard conflicting information about the adaptive ECU; some folks say it isn't flexible enough to accommodate a different exhaust system due to emissions laws, while others say no retuning is necessary. Perhaps I'll do the exhaust changes and only worry about a tune if I feel like it doesn't run as well as it should. The last thing I want is for this 1200 motor to run any leaner than it needs to, because this thing gets plenty hot as is!
Great bike! Do you really feel like you need tank pads ? IMHO the paint scheme on your bike does not work with any type of tank pads really. Do you plan to add any sort of windscreen ?
I'm having second thoughts about the tank pads; I might just put some 3M clear protective film on the sides to protect the paint from my pants and just live with it. I don't feel the need for any kind of windscreen, but everyone's different. Wind blast simply doesn't bother me.
@@VanBlamm I have a speed twin as well same color! Since the tank is a hand made painting and all, I would not add anything on there... But thats just me... As for the screen, I would go for the medium size one from Dart!
Also, why not just stitch grip pads on riding pants?
I may just end up doing that. I've already decided against the clear pads and returned them.
Please don't attach any type of pad to that beautiful tank. If you really need something there, find some type of scratch free knee pad that you velcro to your legs.
Don't worry, I decided not to go for the tank pads! I eventually just got used to riding with a slick tank. Thanks for watching!
Maybe add some flyscreen from DART FLYSCREENS (here code for you PHOTOREV10) I got it on my Speed Twin
I had a flyscreen on my previous bike and found it didn't make much difference. Wind blast just doesn't bother me. Thanks though
Dont do it
Thanks. I didn't do it