My First Excavator Job With ZERO Experience
Вставка
- Опубліковано 6 тра 2024
- Contact Joe Maine for Silver Tip Blades: 229-563-1172
Logrite Log Scales: logrite.com/Item/log-scale
Join the OTW Patreon Tribe: https: / outofthewoods
Get your anchor seal here: amzn.to/48kuh2U
Masonry Brush for anchor seal : amzn.to/42xTWDG
NEW MERCH! Mr KATO Pocket T Shirt: farmfocused.com/otw-mr-kato-p...
MR Kato Hoodie: farmfocused.com/otw-mr-kato-h...
Send Stickers Here:
Mail Address:
P.O.Box 1209
Kingsport TN 37662
Join the OTW Patreon Tribe: https: / outofthewoods
List of tools commonly used at my sawmill:
Logrite Cant Hook: amzn.to/48qjKEo
Logrite Hookaroon: amzn.to/48pO69Y
Anchorseal: amzn.to/48qKtk3
A Must Have Tape Holster: amzn.to/3LyLmxe
My Fav Measuring Tape: amzn.to/3ZrA4Rk
Moisture Meter: amzn.to/3LAa8xf
Oil Can for ATF Fluid: amzn.to/3Px1Mrn
Level for bed rails: amzn.to/3Zxadr1
Framing Square: amzn.to/3ZrqYnq
Nail Puller: amzn.to/3EO0Aur
Out Of The Woods Pocket T Shirts Back In Stock: farmfocused.com/otw/
Grease Zerk Metric: amzn.to/44wGaAQ
Grease Zerk Standard: amzn.to/45MC34o
Grease Gun in video: amzn.to/45xHZyy
Get your Anchorseal here: amzn.to/3KZV3EC
Support the channel and buy a T shirt!: farmfocused.com/otw/
Propane Torch Used I use: amzn.to/46YRgAW
Moisture Meter I use : amzn.to/448kbjr
Nail Gun in use: amzn.to/44V1Irb
Puller Used I use: amzn.to/3XI9Dpt
Buy this and thank me later: amzn.to/42jMdHD
Follow me on Facebook profile.php?...
Follow me on Instagram: / outofthewoodsforestry
Out Of The Woods Pocket T Shirts Back In Stock: farmfocused.com/otw-pocket-tee/
Our Online Store: www.outofthewoodsforestry.com...
If you enjoyed this video consider making a donation to help with production cost of making this free content: www.paypal.com/donate/?hosted...
Save 10% off your first Ariat order - ariat.dkkdet.net/c/3580853/69...
Subscribe to my blog: www.outofthewoodsforestry.com...
Tractors in video: TYM 574 and 754 T25
tym.world/en-us/
Channel Partners:
Woodmizer: www.woodmizer.com
TYM Tractors: tym.world
KATO: katoces.com
Log Rite: logrite.com
Blue Creeper: logrite.com/Category/bluecreeper
Rite Leg Company: ritelegco.com
Nyle dry kilns www.nyle.com/kiln-drying-syst...
Outback Wrap used on hoses in video: amzn.to/3LjNWFT
Check out the new blog post: www.outofthewoodsforestry.com...
Get your leather tape holster here: amzn.to/3y0LqxP
Join the OTW Patreon Tribe: / outofthewoods
Get your Anchorseal here: amzn.to/3mQL3lD
Sawmill Used: Wood-Mizer LT70 Super Wide
www.woodmizer.com
Mail Address:
P.O.Box 1209
Kingsport TN 37662
Follow me on Instagram: / outofthewoodsforestry
Video Tip Jar Paypal: outofthewoodsforestry@gmail.com
* Amazon Sawmill Store: www.amazon.com/shop/outofthew...
Business Inquiries: outofthewoodsforestry@gmail.com
Follow OTW on Social Media
Instagram: / outofthewoodsforestry
www.outofthewoodsforestry.com - Навчання та стиль
Run equipment? Buy this and thank me later: amzn.to/3UvvpvE
I like watching UA-camrs grease their machines using an air or electric grease gun and seeing the used grease ooze out of the joint. sounds kind of creepy, but I like it.
l think you did very well with the Ex.....Thanks Nathan 👍
Nasty stinky Old Shoe🇺🇸
Love my Milwaukee cordless grease gun, I'm heavily invested in Milwaukee batteries, so it was cost effective to stay with Milwaukee.
The moto of life "I sure don't need it but, I sure want it " Should be on a T shirt
A man after my own heart ....plan every day but start with coffee.
@Nathan. My experience...dig the creek mud back out. Lay some of that rip rap on the sides of the culvert til even with the top. Then slat across the top followed by the creek mud. Bonus Atta Bhoys if you cut out some 4 by 10s and make a loggers bridge over the top.
I might have installed the culvert pipe differently however the important aspect to remember: no one, especially Nathan, sought my advice.
You are fired from UA-cam. lol
@@davidcolwell614 Also ineligible for advice 👌
He specifically said "You guys will be the judge." Is that not asking for feedback?
@@tarogue1 Silly rabbit, say what you mean BUT do NOT mean what you say. Nathan is toying w/ you. Viewers can affirm his plan or disagree, makes no difference. End of the day, Nathan pays the invoice, makes the decision. He does occasionally evaluate viewer input, however he remains in charge of Research & Development. 👮🚓
@@billupstateny9151How insightful.
Nathan, the culvert is deforming because the pipe wall is not adequately supported by the bedding and backfill you used. When you load the top of the pipe, the pipe deflects from a circular shape to an oval or ellipse shape since the backfill gives way a little like jelly. I would suggest you dig the culvert back out and then build a solid bottom in your trench using crusher run gravel. Then re-set the culvert and backfill it with crusher run being careful to bring the backfill up uniformly on each side of the pipe. Make sure that you compact the stone well as you go. Once the pipe is fully encased in properly compacted backfill, you shouldn’t experience future pipe deformation.
It's also very wet fill it will dry but I wouldn't drive over till it dries up.
No, the pipe is not strong enough for the equipment weight. Pipe like that is meant to be under concrete for weight on it.
@@joebrunette5594 Not so but it does need dry, compact material all around it to support it. Usually dry clay soil or gravel. Like the first poster said crusher run would be good, but even then you use the dirt to temporarily dam the water flow, dig til you are out of mud and then add back in dry material under, beside, and on top of the culvert. Then release the water by removing your temp dam. Most folks have all supplies ready and work fast until done. With that there is no wait time. See some Letsdig18 or DirtPerfect videos here on UA-cam. Couple of the best pros around, one in N Carolina and the other in Indiana. Letting the water run through while working just makes mud that won't support the pipe properly.
My Dad had 3 levels of his purchase decision. I want...I need...I have to have. Go back and buy that tractor!
Just a thought have your tracks parallel to the ditch that buck really likes to be straight into the ditch then you can just nudge up a few feet and continue down the line as you progress but like you I'm no expert!
Watched all the video now...good planning equals a good result nice for first effort.
We have creek going through our property. We needed a way to cross the creek with our tractor and RTV. Our excavator friend recommended putting in low water crossings. He did it in just a few hours. He dug out the creek bed a bit and made a smooth transition from side to side. Then he lined it with first big rocks and then much smaller rocks and packed it in with a track loader. Actually, he did all the work with his track loader. We've had the crossings for two years now and they have lasted well. They work very well. The water flows across them and we can drive across except when the water levels are very high.
Maybe add another length of culvert to give yourself a little more room?
Nice job though! 👍
Don’t you just build dams? 😅😂
Mud won't compact. Find somewhere on your property that has some good clay and make a little borrow pit. If you will pack it as you go in "lifts" it will hold together better. You can let the dirt you removed from the creek bed dry and use it later or use it to fill your borrow pit back in.
You are doing the best thing there is to learn the skills, and that is just getting out there and doing it.
Those old machines were fun to watch. Some of them look like faces. Headlights are the perfect eyes. Your land looks so pretty in Spring. The green grass is just beautiful.
I always enjoy the early releases. Thanks.
When I was a kid my dad, son of a farmer, would take us to the tractor shows south of where he grew up In Victor, New York. I was always fascinated by the antique equipment.
Very cool!
Yes that was a nice treat to see all the gas engines and classic tractors, i really enjoyed it too.
I missed the early release. I was up early & this must have posted after I'd already signed off.---There's a small town in the next valley over from me, that has an Annual Old Town celebration at the end of September, and they have hundreds of vintage cars, tractors, steam engines. I love going over there. the second day there's a small town parade, as cute as can be. Growing up in North Dakota I saw many old tractors too, but that one Nathan attended had so many I've never seen/heard of. Fun stuff!
@@alanatolstad4824 yes I missed it too and did not see a notification on my phone this morning either.
I've used the plastic culvert berore and the inspector told me I needed 20" of fill on top for it to be equivalent to using the concrete pipe.
Nathan!!! Keep Away from the candy stores!!!! 🤣🤣 😁✌🖖
Well, I think your 'one shot to get it right' worked out pretty well. You nailed a couple of 'firsts' on this job Nathan. However yo do still have some problems with the bedding in of your new pipe & it will not last with the backfill you used. I thought that the rocks you picked up you were going to use to surround the pipe. Jack McDonald set it out well in his explanation below. I would take his advice which is what I would have given. Cheers mate & good luck with the reset. Don from South Australia.
Mike Morgan would be very proud of your culvert job Nathan!!!
Nathan I think you did a pretty good job of it! It looks good. Like you said after it dries you can put some stone or shale over it. I’m giving you a 👍! I really enjoyed that tractor show and that Minneapolis Moline did catch my eye. Cool video. 👍❤️
Nathan you should check out a forest mulcher
It can grind up all that under growth and even the pear trees mounted on Mr Kato
Pear trees You've got to completely get the roots out
Have you ever considered using your post puller to pull out some of the smaller pear trees? Would save a lot of time if it works.
Watched dad and grampa put one in an old cow pasture. Nothing but mud. They dumped like 20 bags of concrete from bags down the side and covered that with the wet dirt. Ild bet a paycheck that it's still there!! Even better, Ild love to chat with the guy that took it out!! lol!!
In case you are interested in some manufacturing history of that Minneapolis Molene, the original manufacturer of that tractor design was Cletrac, it was the only "wheeled" tractor they made, they called it "The General". BF Avery had that tractor painted red, sold it as a BF Avery and developed attachments call "True Draft" equipment. There are 3 videos on UA-cam of old factory film strips on how to sell these tractors. Montgomery Wards sold this same line under the name "Twin Row". My Grandfather's first tractor was a 1943 BF Avery, my Dad bought that tractor in 1950 and was the first tractor I drove in 1958. I bought a similar "Twin Row" in 1978 but sold all in 2005. Still have the "Twin Row" sales brochure from the 40's, $680.00 with battery, starter and lights but no hydraulics, in the 40's it was only lever lift with added helper springs.
As you were tamping down the new culvert, I was deep in thought about your process and then the music sound effects caught me off guard & for a few blinks, I thought there was an intruder in my kitchen...uff da!---Way-to-go Nathan, and gave me a smile on top of it!
Nathan. When you went to the old vintage tractor display in your video. You walked past a old tractor call COCKSHUTT .
Those were built in Brantford, Ontario Canada
So we're the John Deere machines.
My brother lives neat were the factories were.
Oh those old engines are so sweet! They are displayed at the yearly country show at Highclere Castle Estate(Downton Abbey location) every year. They stink with the best stink!
2"or sheall (slate rock) would do wonders to the top of your culvert crossing. Might also think about cleaning out the ditch line for better water flow and ascetics. It would look much better and you could use the dirt to fill in the stump holes from all the trees you have removed. Looking good tho keep at it, it will come around.
I see others have already mentioned, it's pronounced Minneapolis- moLEEN. I appreciate the little tractor "get together" but if you wanna see a REAL antique tractor show, drive on over here to Iowa in September
Doing really well on the low hour usage of the machine and man hands driving it. Cool. If cleaning up the long creek - I'd straddle the creek with the small bucket and dig and drive forward. (Harder to work backward when creek is crooked.) Fabric road grade - and 2" mixed with 1" would be great. Limestone
if possible as it will crack and melt into each other. Great under dressing.
Nathan, you did a professional amateur job. Tip: always park your excavator where you tracks are parallel with trench so you can move parallel without repositioning. Just move side to side. Check your reach then transition your tracks parallel. Same as you realign the trench/ditch to maintain a straight dig. Just FYI my friend.
Drone fly over video before and after bush hog would be cool.
Nice exhibition. Good job filming.
Coffee is good anytime and any weather
Agreed
You need to ask your self a few Q's before completing this project.... 1) What water is traveling in the stream you are fixing??? What is it's source??? 2) Where is it going and how much goes there??? 3) Can you change it direction??? If so why leave in the middle of the field and not down a side of the field so it will be easy to maintain the field???? 4) if it is a lot of water why nor build a pond for many reasons!!!!
You should have put gravel around the culvert before you covered it with that wet mud. Gravel stabilizes the ground better for packing the dirt in!
I would use some of that black plastic instead of the fabric. I have used the landscaping fabric before, and grass is growing through it.
You should backfill culvert pipe like that with crushed stone on each side 2/3 of the way up which they call the spring line. Makes the pipe real stable and stronger to cross over with equipment. Using muddy dirt like that doesn’t give the sides any support and will cause it to squash . Personally I should have used a longer pipe, 10’ just not long enough once you set it down in the ground and backfill sloping the ends down to keep the ends of pipe nice and open .
2 inch rock with large flat rock on top to keep it from washing.
when you are trying to dig a straight ditch run your tracks parallel with then ditch to get a nice straight line
You want to overfill over the culvert so it compresses to level. Should not drive on it till dry. Fabric should be placed on the ends with stone. The fabric will help to not undermine the stone with gushing water.
I think you're supposed to run the excavator with the tracks parallel to the ditch, so that your bucket is always perpendicular to the work. Facing the ditch head-on requires you to keep moving the excavator back and forth. If you were working from the side you could just drive down the whole length while digging it out.
You could make a corduroy road over the muddy culvert fill with some spare small logs. You don't have any logs, do you?
Enjoyed seeing the antique tractors.
Thanks 👍
I'm from West Tennessee and loved the music over the tractor video. Now back to your regular program. 😎
My Uncle worked at Minneapolis Moline (pronounced Molean) for many years.
I am sure you have some shale type material on the banks of your valley.
That is what you should pack around and over the culvert not rubbish alluvial mud.
Love tractor show. Did not know about 1939 Sears Tractor. WOW.! Great job on culvert.
The riprap and 2” stone/fabric are necessary, of course. I would put more dirt on top and roll it out first.
technique.... about@15mins.....turn the tracks parallel to the dig ..scoop up against the blade instead of track.
Sorry nathan but you may already have a problem.
I didn't see much clay go in there to be packed in and around the culvert. When that Top Soil gets a good soak, it's likely to wash out and get real mushy. Top soil does NOT compact like clay.
I worked with a man many years ago, when I was a young kid, in a factory that made magnesium rods for water heaters. It was hard hot work and I always remember him saying, “there is nothing better than a hot cup of coffee to cool you down when it was hot!”
Great video, it is going to be fun to watch the “back 40 develop”. Also your videos are so satisfying, I call them instant gratification because you see the work you do in a short time and don’t have to wait. Thank you my friend, keep it up.
ROOKIE FOR SURE.
Lookin' good Nathan! 2 inch stone will do the trick.
Thanks 🙏
How about a small wooden bridge out of 6x6 wood. Of course you’d have to source the wood from somewhere?
OO sh*t you should be driwing those old tractors, all of them, small and those bigger ones.
The culver pipe is too short, min 16’ or 20’ would have given u more rigidity in the center of the pipe crossing.
Nice work Nathan, having the right machines for the job sure makes things nice, you have came a long ways, really enjoyed watching this all come together, sew a little mix seed on your fresh exposed dirt, that will take hold and may help with erosion, we are getting rain every week it seems.
Thanks buddy
Great video and tractor show
Your culvert should be longer than 10 foot
Yeah that material on to of the pipe should be packed down a bit more is one thing I might suggest.
I would clean out the rest as well.. make it run even better. large rocks on top as your buddy said..
How about some rot resistant 4x12 inch X12 ft planks layer across the culvert covered and sloped gradually to ground level with dirt or gravel. It would probably pack down with time to lower the rise but wouldn’t be a problem if it stayed a little above the surrounding ground level.
Fabric and half a ton of crush and run it has enough cut in it to pack . If you don't use a barrier of some kind the gravel will just keep sinking
Love those old "one lung" pumps. Beautiful old tractors. It was great to see the Farmalls.
This may not interest you, but those Bradford/Callery pear can be grafted over to European Pears (the pears we're accustomed to). They act as a great root stock. Just food for thought.
Ingenious ! What a tractor engine can be used for ! Lovely to see 2 COCKSHUTT tractors there. I spent years researching that name 😊 for the family tree 😊
Well the culvert wont last long. Gonna have the same problems stopping up in no time.
I just love your channel and your sense of humor ✌🏼
I appreciate that!
You're headed in the right direction with the fabric and 2" stone . It will settle down some when it has a chance to dry and pack . Best of luck to you. I know you're going to enjoy the extra area to mow when you get done with the brush hogging and culvert work. Stay safe and keep up the good work around there. Fred.
So great to see all of the other equipment from the show besides tractors. I thought the saw blade tooth setter was amazing.
I was also remembering my Granddaddy, who used to have about half a dozen Matchbox-scale John Deere tractors that dated back to model year from the early 20th century. When he passed, my Grandma passed them on to me, since she knew I’d always admired them.
Very cool!
A wider culvert would have been nice but..... Dirt over the culvert first, heavy driveway fabric, 1"-1 1/5" stone then a road gravel mix.
Our first tractor pull was at Loretta Lynn's ranch (many moons ago!!) An older gentlemen was competing with a hopped up Minne.-Mo. That was my dad's favorite by far!
I also favored that Mini-Mo, she was good looking. I was most jealous of the lathe at 4:10. That was real cool!
Using something more solid than the soil you pulled out to fill around the pipe, would may that crossing better and then top it with solid if you want it to still have grass growing on it.
Have you got one of the bigger tractors set up with a hitch to pull the dump trailer? You've got the mini excavator that you can load dirt into the dump trailer, and a skidsteer to level it out, but if the dump trailer doesn't hook to the tractor you don't have a way to haul it around your ever expanding empire. Not only dirt but anything else like the rip-rap or other processed stone.
LOL, you must have coffee coming out of your pores by now. I'm the same way with tea.
i have had to run culverts on my farm a couple times. I had a friend over for a couple sips first because he does that for a living on highway construction. Following his advice i set in a couple inches of crush under the culverts and then backfilled with 3/4- pit run to almost grade and covered that with more road crush. I sand the road all winter and it seems to be holding up quite well
of course I'm in NW Alberta where there is a problem with frost heaves lifting the culvert out of the ground, I doubt that happens in Tennessee.
Nice job! Your first buddy is correct, just dress it up and let it dry out and it will hold anything you drive across it. I have put in many just like you did on my farm here in WV with no rock and run much heavier equipment across with no issues. The only suggestion I would make for any future ones would be to install a longer pipe, the extra width makes a much more forgiving road. Keep up the great work neighbor!
Nathan! You will soon be a certified EO! Well done, again!
You like to read Nathan, try reading up on how the Romans built their roads two thousand years ago, it was by layering the components! Guess what, the roads are still there in Britain and Europe. Great video as usual mate, you never let us down 👍🏼
I love hearing those hot and miss engines… nice Moline also.
Suggestion. Turn you tracks parallel with the creek and you can cut and move in pretty much one movement.
Also Mr kato would have been good for tracking in the loose soil before running over with the tractor.
Track it in before adding fabric and rock, or you’ll have a bumpy mess
There are always a bunch of those one shot engines at the Kutztown Fair in Pennsylvania around the 4th of July.
Always loved watching the hit and miss engines making homemade ice cream! Even better when dad would get us some! Antique tractors is something we probably have too many of now. Think we are up to 16 or 17 tractors. Most of them are antiques and we use most of them on the farm to this day. I was just bush hogging the other day. I can only do the flat ground. Any type of incline and i get sick at my stomach 😂. Have to call my brother to finish the rest for me. Great video. Loving the content.
Old tires at the ends of the culvert
This is why you are always behind, your as big a procrastinator as I am.....
My grandfather had a Minneapolis Moline when I was a boy. It was one of my favorite tractors to use on his farm. Best wishes.
Nice!
Love the lathe.
more red dirt and track it in with the excavator to compact each layer until it has that slight arched bridge look, letsdig18 and dirt perfect are excellent channels for info
to bad you dont have a steel plate to lay across there,,thats what they use on the back roads here,,,covering big holes,,it works good,,course you could get to small ones,only where your tires go over it,then fill the middle...i watch them pick those plates up,,they got a hole right in the middle of them,they stick a chain in that hole and pick strait up..perfect balance..i think there only half inch thick.you didnt do a bad job on that Nathan,,but that dirt is mud,it wont hold weight..you got to have something solid..for a tractor..
Start again. Dig deeper . Rock 3/4minus all around. Then put your pipe in fill withrock more and fill top with dirt. Otherwise it will be a muddy battle. Jim
You wont keep the weeds out of it unless you spray it even if you put fabric. The dirt you put in front of the kiln would work perfect to fix that. Even consider taking some of the mud out before putting it on the pipe. Just my opinion.
Great to get the culvert installed and working. The land looks much better after the brush hog. Good job.
I'd go with the 2" rock.
Nice job for your 1st try! Looks good, better when it dries. Gravel on it sounds great.. Good luck Nathan. Its gonna look great when you are done. Especially when you bush hog and remove the pear trees.. Best of luck!
As a sawmill focused channel, a few thick heavy slabs of Osage orange wood long enough to span the gap and connect the weight over to the opposing edges seems viable. That yellow wood is very moisture and rot resistant and considered a pest tree by some for its useless fruit. Plus the yellow wood cuts up pretty and don’t think I’ve seen it on this channel.
Good idea, put some felt down them stone. Thanks for sharing 👍🏼
Great Job! Keep up the good work.
Nathan, I think you did an outstanding job on your Culvert, great Video as always.
That creek job looks like a ton of fun.
Good to see you happy 😃
Maybe you could use some your excess slab wood to make a sort foot bridge or a "cattle ' crossing .