How to fix Domestic WATER PUMP MOTOR NOT STARTING AT HOME ?
Вставка
- Опубліковано 10 вер 2024
- Guys today in this video I will share with you how I able to fix my water pump which is not starting. If you face similar problem then your pump might have
three problem.
1. The rotor is tight because of dust.
2. Motor capcitor has gone bad.
3. motor coil wire burn or some wiring problem.
In this case my pump motor condenser / capcitor was burned out and because of this reason my pupm was not starting.
******************************************************************
Subscribe To me: goo.gl/qzUGMO
Twitter : / roytectips
Facebook : / roytectips
instagram : / roytectips
Whatsapp : +91-7688089356 (don't call just message)
email : roytectips@gmail.com
******************************************************************
how to repair water pump motor not working
Domestic Water Pump Repair: Bearing and Water Seal Replace. Part- 1
water pump repair sikho || Crompton water pump repair
how to repair water pump motor fan
water pump motor repair capacitor
#roytectips
#fix
#pumpfix
#motorfix
#pumpnotworking
Very confident and knowledgeable User. Thank you for sharing fault finding. I will go for Capacitor first.
Best video. Thank you. You make trouble shooting so clear. Super hero.
THANK YOU SO MUCH!
YOU ARE THE BEST!
My water pump had the same issue and I changed the capacitor although I have zero experience, aaaand it worked!! Thank you so much😭😭❤❤❤
Very good demonstration.
I had a similar issue. First, I changed the capacitor. It didn't work.
Rotor was not moving smoothly. As suggested by you, I rotated the rotor manually later applied oil. Now it's rotating freely. Now it's working.
Thanks a lot for uploading this video.
Thank you! I have just rotate the rotor part of motor. Now it has been fixed the issue.
Thank you dude. I just had to change the capacitor. It was burnt. It costed me 110 rupees.
Hi, I changed the part the previous one had blown out, the pump works now, thanks to your helpful video.
Coincidentally my water pump stopped working and this video's notification came 😂
same here. but issue is not as mentioned above. between, ur pump started?
@@kmore1981 started but it runs and stops and repeat it again
I think it was not a coincidence. We all know google uses our mic 24x7. And its AI keeps tracking our audio and sends us feed as per our real time discussion..
You've been served by Google.
Saved my time and money .. thanks 😊
thanks i turn the fan a bit and it worked, you are great!
Thanks so much for sharing. My impellor is very tight 😢,I put CRC but still the same,it jamming and trying to pull it out a little but no
Thanks
Thanks so much for this content!
simple and practical explanation...thanks👋👍
Thank you very much. You saved my day man. Good video.
Thank you for sharing your experience.....🎉🎉🎉🎉
Good 👍 job done. My Allah bless you.
Very helpful
Great tutorial.
Thanks for the help 👍
Very helpful video
Thank you
Thank you so much
this helped me
The same problem is happening today... morning that humming noise is there .
That's nice
Dear, my rooter start after clockwise mean anti direction then it starts. It every time when I start it. Its verm locks after every switch off. Can you share what is the problem is?
What did you use for the rotor?
Features batao bhai
Capacitor ke features batao 😊
The motor is running fine but there is current flowing in it, what is the reason for that?
Sir my motor off automatically after 2 or 3 minutes can you help me
Help. My motor starts only when i manually spin the rotor with my hand. Wat could be the issue...?
I think same issue. Change the condenser / capacitor
If not u could put some oil in the front axis at and at the back to the axis spinning rod. Rotate manually with your hand with the fan to work the oil in both areas
if water pump is not operated for 2 years what will happen
I have an issue my rotor is working but water isn't flowing in the pump to go in my house
It means the foot valve that is located at the end of the suction pipe in the source water tank is malfunctioning - replace it. After that, open the self-priming nut located on the top of the pump inlet and slowly pour half a bucket of water through the hole. Hold your palm over the hole (only if the pump is 1Hp or less), and start the pump for a few seconds. The pressure will build up and push your hand away. Switch off the pump and close the nut. That's it.
@@Valmik.iNayak thanks i did fix it tho but thanks anyway
my motor is 200 ft underground.. good riddance
😂😂
Water pump very weak and capacitor is New tested capacitor
None of this worked but.
Sorry to hear that, check the continuity using a multi meter.
Thanks