Fake News Series | 2 | Air Sealing Claims of Spray Foam Insulation
Вставка
- Опубліковано 11 вер 2024
- Can you really expect to seal any building air-tight using spray foam insulation? It may surprise you what we find.
sprayjones.com/
Do you need a vapor barrier with 2 lb? • Does 2 Pound Foam Need...
Greatest Intel drop on Roofs • Non vented Roofs And S...
Does SPF make Toxic Smoke? • Does Spray Foam Insula...
SPF for old wood buildings • Spray Foam Insulation ...
SPF for old brick buildings • Spray Foam Insulation ...
Existing walls with SPF via the exterior • Spray Foam Insulation ...
Roofs, attics, SPF, Video 4 • Cathedral Ceilings, At...
Roofs, attics, SPF, Video 3 • Cathedral Ceilings, At...
Roofs, attics, SPF, Video 2 • Cathedral Ceilings, At...
Roofs, attics, SPF, Video 1 • Cathedral Ceilings, At...
R Value Myth Exposed • R Value and Spray Foam...
Is spray foam Toxic? • Spray Foam Insulation ...
Spray foam and Electric Wiring • Spray Foam Insulation ...
#1 Reason People Get Cheated With SPF • # 1 reason people get ...
Post Frame Homes & SPF • Post Frame Home & Usin...
Container Homes & SPF • What is the best insul...
Flash & Batt II • Flash and Batt 2 | Can...
Is thermal bridging bad? • Is Thermal Bridging Ba...
Is spray foam insulation a vapor barrier/ • Does Spray Foam Insula...
Is there waterproof spray foam? • Is There Waterproof Sp...
Is 1 inch of spray foam insulation enough? • Is 1 Inch of Spray Foa...
Open cell foam • What is Open Cell Spra...
5 failures and why • 5 Spray Foam Insulatio...
How much foam do I need? • How Much Spray Foam In...
What Conditions do we need to apply? • What Conditions Are Ne...
Burning the SPF • Burning Spray Foam Ins...
SPF in contact with ground • Spray foam Insulation ...
Shingle life and SPF • Shingle Life and Spray...
The most dangerous SPF installers • Who are the most dange...
Why is our foam purple? • Why is our spray foam ...
Best practices for your basement • Best practices for spr...
Why is spray foam insulation safe and effective? • Why Is Spray Foam Insu...
The 10 Commandments of Spray Foam Insulation • The 10 Commandments of...
Can we inject spray foam into walls? • Can Foam Insulation Be...
Spray Foam Insulation for your New Home - Why? Before you Buy! • Spray Foam Insulation ...
4 Pitfalls of spray foam insulation • 4 Pitfalls Of Spray Fo...
Unvented roofs - Closed cell or Open cell • Unvented roofs - Close...
Trouble with spray foam - what 5 things do we test for? • Trouble with spray foa...
Low Income housing get SPF • Low Income Housing Get...
Spray foam insulation for metal buildings & Quonsets • Spray Foam Insulation ...
Spray foam insulation for basements - Rigid SM or SPF? • Basement Insulation - ...
Why put spray foam insulation under-slab? • Why Put Spray foam Ins...
How to know if you are talking to a Rogue SPF contractor • How To Know If You Are...
6 areas that need spray foam in your home • 6 Areas That Need Spra...
Thanks for the rich content you provide Mike. I'm a true believer. This helps me further the conversation in my neck of the woods.
Air sealing is such a benefit. People need to understand the convectional sealing superiority of closed cell foam. Well done Mike!
I really wish you and @buildshow (Matt), and that "crew" would sit down and have a frank discussion about all of this.
I also think that many people would like to do this, but it still remains very expensive.
I handle the info from the spray foam side of the stick and they do it from the builder and materials side.
@@SprayJones I get it, but but I know there are some people in that camp that run into the same things you do debating if it's truly an air barrier, etc. We hear the same things you do and having someone like Matt and the Build Show crew, which have more reach (Subscribers) could go a long way in the mythbusting of these concerns and quelling some of the naysayers. thanks
Would you have a bid spec to share that ensures I really get what I need from a reputable spray foam contractor?
We need your cousin, Spray Smith, in the US! Best informative video I've ever found on the subject.
Maybe one day!
Great comment on outside airsealing...you need both. Even Risinger noted being disappointed in air infiltration if only relying on spray foam....the same as being disappointed if only relying on exterior systems. Need comprehensive and supportive actions. Great video!
Until all the gaps are sealed the building is not sealed. It takes multiple products to do that; this is self evident.
Will closed cell spray foam bond properly with plywood that’s been sealed with C2 brand “Guard” waterproofing product (which claims to change the nano structure of the wood)?
98% yes.
Great informative video Mike keep’s coming
That’s supposed to say keep’s coming
Thanks, will do!
A contractor is finishing my all metal barndominium. He tells me that closed cell foam is the way to go, which seems to be true based on what i see here. Is any special prep required to get proper adhesion to the metal? Hes taliking about putting in seven inches to envelop the the purlins that support the roof sheeting so we do tget condensation. Does that make sense? Any issues with application while its cold outside (20 degrees F)?
Please watch my metal building playlist. I cover all these questions in detail there.
the problem is how expensive it is... i just got spray foam done, 4" closed cell... was more expensive than ALL of the lumber for the entire building. and i did double stud with 2x6, a full load floor for the attic too. didnt skimp on the wood...
the spray foam took basically ONE guy 3 days... took me all summer to frame it. and these guys quoted HALF of what every other sprayer was quoting.
hopefully, worth the investment... i could build a whole extra house with batts for the price of it... excluding bureaucracy
on the up side, they sprayed more like 5" and someplaces 6" thick.
One way to save is to do flash and batt, or 2" closed cell and the rest open cell.
The spray foam is the building. There is no comparison of a batt to SPF in how they work and what the end result will be 5-8 years from now. The "pains" you are expressing are only because your mindset is catching up to what you have bought. I live on a hill and the wind blows 3/4 of the time, batting is never an option SPF is the only way to do it, so one has to suck it up and do it.
No way, that's crap. Have 2 videos on that dangerous method.
@@SprayJones Flash and batt?
@@drooplugYes that’s what he was referring to
AeroBarrier will spray some stuff in the air and then press that stuff into all the cracks. No need for caulking at the seams then as I see it. For more, see _Matt Risinger: The one product I'd recommend for EVERY House!_
Caulking every crack is best to ensure that later on non of them are an issue. I have seen things open up over time.
And that one of the reasons I switched to spy foam I ripped into a 5 year old Reno to put a patio door in the place of a window and the vapor barrier caulking was hard as a rock doing nothing
I have an AeroBarrier division at my company. It's great to tighten up the interior envelope when using fiberglass as a primary insulation type (🤮), but it has limitations. To get super tight seals, a lot of the work has to be done during construction.
However, when we use it as an exterior envelope seal AFTER a full spray foam job (floor, walls, unvented roof), it works AMAZING. It is much less time consuming than caulking and it's a far better product than caulk for long term. It guarantees that nothing is missed and give a final ACH print out when it's done.
@@SprayJones RE: I have seen things open up over time
I can believe that. But how much did that alter the original result? We are dealing with small numbers here. Cant tell which is better when we don't have numbers and we cant tell what things will cost.
@@rm70x7 Thank you for that.
How is the costs for AeroBarrier? And how is the availability? No one around here who can do it.
Your quality install is Great! And Yes Your's is Very even and Smooth. The guy that did my attic, I know it was Open Cell, but it ended up looking kind of like they blew Popcorn in the Attic. It was Not very good.
That happens. Good thing unlike wives & sweethearts looks don't matter as much.
Yes you are Absolutely Right!!!
Ever since the Price of Foam Insulation has dramatically increased,
it Seems like Notable Online Contractors have Retaliated and Started to Proclaim Fibrous Insulation as As Good or Better than Foam Insulation.
Obviously the Closed Foam is better for the 1st Line of Defense against Air Infiltration on the Interior.
But contractors are upset that foam insulation is so expensive... In my humble opinion.
Every building material has gone up. We are included in all that.
10 years ago SPF was a lot cheaper than it is now and people still said then that SPF is too expensive. It is a head game not as much as a pocket book game.
QUESTION: If I choose to use Zip R-3 sheathing on exterior will 3 inches of spray foam have any problems with adhesion?
Mike, Ive been watching many of your vids. After searching your vids, can't find my answer to my problem. New build residential and I have 12' covered porches. My tier two and tier three contractors tell me to build a 4 mil false wall vertically up from the ICF. I don't think I like the idea, I think its better to spray the upside of the porch coverings with open cell? Please give me your opinion. V/R.........Darin.
We do not spray into areas that do not need the SPF. Usually we separate off the house from outer areas... I am not sure this is what you are asking or not.
Another great video. My sprayfoam installer has installed open cell spray foam in my garage ceiling. Above are bedrooms. Is a vapor barrier required to cover the open cell spray foam on the ceiling of the garage by code?
How would I know since I have no clue where you are and what code is for your area?
On a general physical note spraying to 3/4" OSB or plywood, the wood has enough vapor perm rating to be a vapor barrier. So the open cell would be fine in that situation.
Great information backed up by studies.
However I think your point stated that proper thoughtful and complete installation of all the components of the system is of the utmost importance. No one product can do it all in a wood structure IMHO.
On a side note/question?
Do you have an opinion on properly installed radiant barrier? Permiable vs non permiable ? Taped n sealed w the required 25mm air spaced? Exterior or interior and or both?
Blessings Sir and happy holidays
Crawford out 🙏 🔥⚒️🧙🏼♂️
Thanks for watching and commenting how you do. I am not so familiar with the product you mention so I will have to learn more before commenting.
Do you ever do a misting caulk like AeroBarrier after you spray foam?
No. I don't believe in that method. We go over every joint by hand and make sure they have something in each one.
Awesome content! Subscribed.
I'm putting spray foam in my house and contractor is half way done but recently his machine has been having problems so he is fix8ng it. While waiting for him to fix it, does this time break to fixing the machine impacts the quality of work? I'm doing a 2 inch SF. Thanks in advance
Not of the foam.
What was the blue sealant shown on the video for sealing the stud to stud gaps? We've used acoustic sealant but it's a tube or sleeve and trowel. Haven't seen the spray seal around here.
Would it be a perfect situation to have a double stud wall and be able to spray the exterior layer of that wall entirely right down onto the floor (With Acoustic under/above the plates)? We're doing a rough design right now and considering the double stud walls, (2x6 exterior and 2x4 interior) and it feels like the best practice would be to air seal the whole interior side of the exterior wall, right over the studs and floor plates. Interior wall would be responsible for hanging drywall and running electrical/plumbing etc so no loss on the exterior wall and no need for access later.
Eco Seal
What do you say to people that are concerned with the condensation that accrues on the enteral windows?
Worried (long term) that it will ruin the window seals?
No. Get triple-pane windows.
Make a rediculously tight structure and then install a HRV which consumes purchased energy. Yup, that makes sense. If you don't have a forced air heating system, you then must install a complete duct system to distribute the conditioned air.
Yeah it's so ridiculous. I also hate how easy it is to regulate refrigerators and freezers. They should breathe raw outside air and not have a mechanical ventilation system to make them work better. It's such a waste of purchased energy just to keep the climate inside at a certain temperature.
That is called building science. We make an air and water tight structure so that we can control what goes on inside of it, not be at the mercy of the elements.
Building Science, yes. Building sense, maybe not.@@SprayJones