I use all the guards. Depending the clipper of course. But as for the 1.5 (1 1/2) guard. I prefer to use the "speed o guide" "0" guard. I feel like they pick up the hair better and help transition the fades better
I have all three guards but always use the wahl premium guards. Thats only because I use two cordless seniors. Although I love the premium guards, I would say that the teeth and overall feel of the double magnetics are better (when used on fast feeds). So I’m thinking of modifying them to fit on my cordless seniors.
I started doing fades with oster fast feed, the guards that come with it are useless, what bout andis guards? Do the single magnetic guards fit or can i go with double magnetic guards?
@@IDOITTRAVELS thanks for the advice bro, the blending guard that comes standard with the oster are horrible, i gotta go over my guidelines x3 as mutch to blend em
Valentini Gotti thats because the fast feeds have a pivot motor they have less power so you find yourself going over it more than a clipper with a magnetic motor
The same way you don’t need the 1 1/2 guard for andis. Doesn’t that also mean that you don’t need the half guard ? Because can’t you just open the blade all the way up up to the one. For example maneuvering the taper lever giving you the 0.25, 0.5, 0.75, and the full 1 lever all the way open ? So is the half guard really needed ??
No u don’t need half guard.... but If want u can but I recommend using half guard for beginners barbers ..... becuase is really hard with no half guard so. personally I don’t use half guard i used no guard open using the back side of the blade ... and bammm the line is gone blended but if u see like little bit line or shadow line just go halfway lever and just the corner of the blade.... i used 1 guard, 2 guard , and maybe 3 guard but ..... after 2 guard clipper overcome ... but yes u don’t have to used half guard ... !!! ( !!! so no guard lever open is a 1 )!!!!
Andis double magnetic guards now has a .5 and a 1 1/2 guard..... people say the andis single magnetic guards suck but they use them wrong... the single magnetic andis guards are for detachable clippers..... i like the premium wahl guards best
Xavier Smith yea get them bro I went to Sally’s and got them I’m going today to get more they are miles better than the first version imo! They blend into each other beautiful
Xavier Smith the zero guard is made like the wahl half guard now and the one is made different to and blends into the two guard perfect! I did a video review on them check it out bro!
Hi ! Great videos men, absolutly loving your channel and skills you are showing. How about this colorfull whale guards without metal part on them ? Did you tested them maybe ?
Just saw a video where andis actually updated the 0 and the 1 single magnetic guards. Now the 1 blends right into the 2 like they SHOULD HAVE done in tbe beginning!! 😡😡. They have the new ines at Sally's
What’s up boss man, I only use the andis masters and the wahl seniors. Is there a clipper guard that works with both clippers. I stopped using the speedo guide because the triple 000 or 1/16th red guard always breaks at the teeth. I have bought about 10 pairs of Speedo guides. They are complete trash when it comes to build quality
Go to UA-cam Barber Academy’s channel and he has a video on how he did it. I’ve seen a few other ways, but you don’t wanna go through that. It calls for modifying and drilling the blade itself.
Dont buy those magnet guards they are pieces of shits. Personally they break and the magnets fall off all the time its annoying. Also the guards move around like wtf!!!!! I fucked my head up with it
What’s up, SQUAD!!! Let me know your top clipper guards in the comments below.
I just purchased these Oster Classic 76 but wonder what guards will fit these or do I have to buy a separate blade in the size I want?
Single magnetics or speed-o guards
Monica P. I always wondered too. I wanted them but not a fan of detachable blades.
What will fit andis envy li?
Mario Francois single magnetic guards and speed o without any modifications
I used the andis double magnetic guards they work so well with my oster fast feeds.
🔥🔥🔥
I use all the guards. Depending the clipper of course. But as for the 1.5 (1 1/2) guard. I prefer to use the "speed o guide" "0" guard. I feel like they pick up the hair better and help transition the fades better
I have all three guards but always use the wahl premium guards. Thats only because I use two cordless seniors. Although I love the premium guards, I would say that the teeth and overall feel of the double magnetics are better (when used on fast feeds). So I’m thinking of modifying them to fit on my cordless seniors.
Great video bro keep giving very helpful info!!!
Just switched to the .50 Cal, I'm lookin for guards for it. Whats the best options in your opinion?
Question just cause the brand is different like if I have a senior clipper will the andis guard fit or Do I need a andis clipper, mm
Depends on the guards
Will the wahl premium guards fit the Andis clippers?
Only because I have the Wahl fade blade on my envy’s.
What double magnets guards will fit the cordless clippers on the market today!
They fit the babyliss
Double magnet is what I use and the Wahl premium are great too
Great video keep it up bud
I have got the cheap kemei clippers from China. They cut great & wahl guards fit so I’m buying some envy guards are they premium?
No
Im using wahl clippers. Which is better, single or double magnet andis guards ?
Doubles 🎤
I don't know if you know, but they came out with the one and a half double magnetic guard too
Quick question. Do the double magnet guards fit all or most Andis blades???
Some not all
I use and is single magnetic on my magic clips. Works great
Where can I buy the andis double magnet guards
Amazon
I started doing fades with oster fast feed, the guards that come with it are useless, what bout andis guards? Do the single magnetic guards fit or can i go with double magnetic guards?
The singles fit but, get the double magnetics please!
@@IDOITTRAVELS thanks for the advice bro, the blending guard that comes standard with the oster are horrible, i gotta go over my guidelines x3 as mutch to blend em
Valentini Gotti thats because the fast feeds have a pivot motor they have less power so you find yourself going over it more than a clipper with a magnetic motor
Which detachable clipper blades are your favorite? I'm trying to decide between the Andis CeramicEdge vs. UltraEdge.
Haven’t used either. I have Oster blades with the ceramic cutting blades.
Just picked up the Andis Master (non fade) and I don’t know what guards will fit it. My barber uses a 1. Thanks!
Purple magnetic Andis guards fit the master perfect but then again that's the clipper they're made for🤣, seriously though use them they're great.
@@CASTRO45ACP hey thanks I’m a woman that was trying to figure out how to cut my hair during beginning of pandemic.
@@vc6218 No problem
How much you pay for those double magnet ones
$20
Good looking man saw a set of 20 something on Amazon and one for like 122$ looked exactly the same said double magnet, was so confused.
Miguel Sandoval lets hope the cheap ones aren’t knockoffs.
I want to be a barber when i grow up
Salut! Vous en vendez?
The same way you don’t need the 1 1/2 guard for andis. Doesn’t that also mean that you don’t need the half guard ? Because can’t you just open the blade all the way up up to the one. For example maneuvering the taper lever giving you the 0.25, 0.5, 0.75, and the full 1 lever all the way open ? So is the half guard really needed ??
Alexander Sandino i had the same question, im not following on why the .5 and 1.5 guard is necessary
No u don’t need half guard.... but If want u can but I recommend using half guard for beginners barbers ..... becuase is really hard with no half guard so. personally I don’t use half guard i used no guard open using the back side of the blade ... and bammm the line is gone blended but if u see like little bit line or shadow line just go halfway lever and just the corner of the blade.... i used 1 guard, 2 guard , and maybe 3 guard but ..... after 2 guard clipper overcome ... but yes u don’t have to used half guard ... !!! ( !!! so no guard lever open is a 1 )!!!!
Thanks for all your help
Hi what guards do you think will fit the babyliss pro super motors? Thanks
The wAhl guards should fit
Andis double magnetic guards now has a .5 and a 1 1/2 guard..... people say the andis single magnetic guards suck but they use them wrong... the single magnetic andis guards are for detachable clippers..... i like the premium wahl guards best
Xavier Smith nah bro the new single magnetic are dope they are way different than the first version the all blend together perfectly now
@@johnnypercell3735 i will give them a try for my detachables.... i have 2 wahl seniors for cleanup but use andis zr ii for the majority of my work
Xavier Smith yea get them bro I went to Sally’s and got them I’m going today to get more they are miles better than the first version imo! They blend into each other beautiful
Xavier Smith the zero guard is made like the wahl half guard now and the one is made different to and blends into the two guard perfect! I did a video review on them check it out bro!
@@johnnypercell3735 will do..... thanks for the heads up
Can you use them on the Oster fast feed
Only the single magnetics. I would recommend the doubles
@@IDOITTRAVELS thanks bro
You can use double magnetic on fast feeds
Hi ! Great videos men, absolutly loving your channel and skills you are showing. How about this colorfull whale guards without metal part on them ? Did you tested them maybe ?
Marcin Migacz hey! Glad you enjoy the content. I’ve never used the Wahl color guards. Sorry
How much
Can i Use the purple magnetic Guards on my Oster pro power Clipper??
Is that a detachable blade clipper?
Anyone know if these work on a Beauty Master +
Anyone have info on where to buy the ORIGINAL Andis double-magnetic purple guards?
Noe Aguilar Jr Atlanta barber supply they have a purple double mag .5 and a 1.5 now !
barber-and-beauty.andis.com/product/master%26reg%3B-dual-magnet-small-5-comb-set/?item-no=01410
Would you recommend the speedo guards
Never tried them before, so I cannot say. I hear they’re great
The speed 0 guide is the best
Great video ! What song beat is that? you play in the backround?
Chuki Beats - Tender
Just saw a video where andis actually updated the 0 and the 1 single magnetic guards. Now the 1 blends right into the 2 like they SHOULD HAVE done in tbe beginning!! 😡😡. They have the new ines at Sally's
Are they cheaper on amazon or sallys
Kevin Escobar amazon but worth trying to compare online at sallys
@@kevinescobar8562 definitely Amazon
Andis DOUBLE Magnetic Clipper Combs.
Oster professional! Hands down
Speed 0 guide is the best guards
Andis premium guards are my new favorites.
@HONESTO UNO Idk if they'll fit the fast feeds.but they fit nice and tight on my masters, so I would say they are as good as the magnetic guards.
What’s up boss man, I only use the andis masters and the wahl seniors. Is there a clipper guard that works with both clippers. I stopped using the speedo guide because the triple 000 or 1/16th red guard always breaks at the teeth. I have bought about 10 pairs of Speedo guides. They are complete trash when it comes to build quality
You can modify the double magnetics to fit both. The Wahl guards are too small to fit on Andis blades
How is the modification done?
Go to UA-cam Barber Academy’s channel and he has a video on how he did it. I’ve seen a few other ways, but you don’t wanna go through that. It calls for modifying and drilling the blade itself.
Babyliss Premium Guards, Wahl Premium Guards, then Andis Premium Guards
Man I can’t even find these
What does (MMA) mean?
Mixed Martial Arts
Lmao! Do you live under a rock?
Dont buy those magnet guards they are pieces of shits. Personally they break and the magnets fall off all the time its annoying. Also the guards move around like wtf!!!!! I fucked my head up with it
Who else thought his ig was idiot barber 😂
Never mind. Lol