Thank you for going through set up. It looks stout. I like that thumb control set up. Very interesting to use outrigger stable for conversation. I guess you yourself will see if you like to reach forward and down to raise/Lower the thumb. Please do a video on how you like the reach to grab a smaller lever forward. I would in my Humble opinion get confused on reaching for stable control Levers. Anyway that Backhoe looks so beefy. Sucks that the carrier doesn't care enough to at least put an old rag or something over the new cylinder outside to protect it. Back in 1978 my father got a brand new Case 580-C One of the two boom cylinders had a chip gouge on it. The salesman said don't worry it's nothing. "Guess what" about a month later, it started leaking. The same salesman said we did it. Moral of the story. NEVER let your NEW piece of Heavy Equipment leave the sales yard, till you have inspected it fully. Check all your cylinders. Don't do what a hurry up and get it off my lot salesman intimidating you. Don't take the machine till the problem is fixed or some kind of lower money trade.
Hooking up to the 3 point and all with no subframe attached is a good way to split your tractor in half. On the plus side you can inspect the inside of you transmission.
Makes a lot of sense when you considered having 800lbs plus on the 3pth racing across a field. Just cuz your 3pth is rated for a spec for lifting doesn't mean it was designed to have one of the heaviest impliments your going to put back there with no consequences. Common sense...Just like wheel bearings on your vehical are not a good mix with potholes as they're not designed for impact.
Great video, thanks for posting. It looks like the backhoe is mounted to the 3-point hitch, have you had any problems with it being mounted this way instead of a sub-frame? I'm thinking of doing the same kind of set-up as I can't find a sub-frame for my tractor. Thanks in advance.
None at all. I'm the one driving the backhoe in the video and it's been between my dad's new Holland and my TC30 New Holland and no issues on either tractor.
That is a handy tool to have, the HOSS-IT-IS. The backhoe and one man can replace 20 men with shovels. Now I am kind of curious, what is going in where, the backhoe is digging. That is a good attachment for your tractor. I have a relative, that was whacked by a backhoe shovel, operated by a friend. The relative was doing the clean-up work, with a hand-manipulated shovel. ... My relative quit the job; he did not think his friend was a careful operator. ... My relative just ended up with a badly bruised arm and shoulder. But, he thought, maybe next time, he might end up with a big dent in his head. (A hardhat will not stop a backhoe shovel.)
John Back in 1979 a Laborer got inside my Backhoe bucket to be pulled out of the ditch. We were trying to find side sewer stubs from the big mainline project. We had a Dynahoe & and a Case-780-C digging the side sewer stubs. I did not tell the guy to "get your hands inside the bucket" He broke his wrist holding outside of the bucket coming up ( hand got jammed by a big root stick. I did feel really bad. But mostly for not being more firm about keeping ARMS/ FINGERS always inside the bucket
The money we spent on a used tractor with a loader broke our budget for the next 3 years and now my wife is giving me dirty looks because I started considering a backhoe for it and drooled when you showed the thumb attachment. Oh and can you believe this, she's now saying I'm grounded from youtube. Oh no ya don't...hey....help.... she's trying to take the mouse from me! I'll be back thumb attachment...I'll be baaaaaaaack :o)
I think after reading about you situation I’ll just tear up my honey dew list and start on my bucket list. Then again, probably some of the work you’ll do with the new backhoe is on her honey do list. Like digging up stumps that refuse to rot. Have fun.
I contacted these folks 3 weeks ago about ordering the 7600. they said they were having computer trouble calculating my state tax. I'm still waiting to hear back from them. Forget it WoodMaxx don't even bother.KMA
If you buy one, do not put gear oil in the pump, find Something Else. When the pump is running, it has a vent when it gets hot and all you smell is gear oil.
Thank you for going through set up. It looks stout. I like that thumb control set up. Very interesting to use outrigger stable for conversation. I guess you yourself will see if you like to reach forward and down to raise/Lower the thumb. Please do a video on how you like the reach to grab a smaller lever forward. I would in my Humble opinion get confused on reaching for stable control Levers. Anyway that Backhoe looks so beefy. Sucks that the carrier doesn't care enough to at least put an old rag or something over the new cylinder outside to protect it. Back in 1978 my father got a brand new Case 580-C
One of the two boom cylinders had a chip gouge on it. The salesman said don't worry it's nothing. "Guess what" about a month later, it started leaking. The same salesman said we did it. Moral of the story. NEVER let your NEW piece of Heavy Equipment leave the sales yard, till you have inspected it fully. Check all your cylinders. Don't do what a hurry up and get it off my lot salesman intimidating you. Don't take the machine till the problem is fixed or some kind of lower money trade.
Thanks for the video I think iam going to order one on Monday for my jd 790
Hooking up to the 3 point and all with no subframe attached is a good way to split your tractor in half. On the plus side you can inspect the inside of you transmission.
We've had the backhoe for over a year no problems yet
You won't have problems until you do.
Ahh the old wives tale...split the tractor in half 🤥
That split the tractor in half myth spread quicker than the covid hoax
Makes a lot of sense when you considered having 800lbs plus on the 3pth racing across a field. Just cuz your 3pth is rated for a spec for lifting doesn't mean it was designed to have one of the heaviest
impliments your going to put back there with no consequences.
Common sense...Just like wheel bearings on your vehical are not a good mix with potholes as they're not designed for impact.
That beats a shovel any day, I need to do some research on it.
excellent design
Any problems with PTO pump jerking? Somehow mine snapped the PTO shaft right off. Don't want that to happen again. Any tips?
Any problems with it breaking your tractor? Thinking of getting the 7600 bh.
Great video, thanks for posting. It looks like the backhoe is mounted to the 3-point hitch, have you had any problems with it being mounted this way instead of a sub-frame? I'm thinking of doing the same kind of set-up as I can't find a sub-frame for my tractor. Thanks in advance.
None at all. I'm the one driving the backhoe in the video and it's been between my dad's new Holland and my TC30 New Holland and no issues on either tractor.
BhvcdA
P
That is a handy tool to have, the HOSS-IT-IS. The backhoe and one man can replace 20 men with shovels. Now I am kind of curious, what is going in where, the backhoe is digging. That is a good attachment for your tractor.
I have a relative, that was whacked by a backhoe shovel, operated by a friend. The relative was doing the clean-up work, with a hand-manipulated shovel. ... My relative quit the job; he did not think his friend was a careful operator. ... My relative just ended up with a badly bruised arm and shoulder. But, he thought, maybe next time, he might end up with a big dent in his head. (A hardhat will not stop a backhoe shovel.)
Just a test hole
John
Back in 1979 a Laborer got inside my Backhoe bucket to be pulled out of the ditch. We were trying to find side sewer stubs from the big mainline project. We had a Dynahoe & and a Case-780-C digging the side sewer stubs. I did not tell the guy to "get your hands inside the bucket" He broke his wrist holding outside of the bucket coming up ( hand got jammed by a big root stick. I did feel really bad. But mostly for not being more firm about keeping ARMS/ FINGERS always inside the bucket
Very Nice man! Do you want to reveal the cost? I'd love a backhoe someday....
I thank it was $5500.00 here is the link
www.woodmaxx.com/WM_8600_WoodMaxx_Backhoe_Attachment_p/wm-8600.htm
That is with the hydraulic thumb , we also got a one foot bucket the bucket was another $265.00 the backhoe came with the two foot bucket on it
HOSS-IT-IS
How big is the tractor.
40hp?
@@hipolitoolvera3998 30 hp
I need to figure out how to put one of those on my riding mower.
MORE Videos ON THIS BACKHOE,!!!
Not yet going to make some soon.
The money we spent on a used tractor with a loader broke our budget for the next 3 years and now my wife is giving me dirty looks because I started considering a backhoe for it and drooled when you showed the thumb attachment. Oh and can you believe this, she's now saying I'm grounded from youtube. Oh no ya don't...hey....help.... she's trying to take the mouse from me! I'll be back thumb attachment...I'll be baaaaaaaack :o)
I think after reading about you situation I’ll just tear up my honey dew list and start on my bucket list. Then again, probably some of the work you’ll do with the new backhoe is on her honey do list. Like digging up stumps that refuse to rot. Have fun.
I contacted these folks 3 weeks ago about ordering the 7600. they said they were having computer trouble calculating my state tax. I'm still waiting to hear back from them. Forget it WoodMaxx don't even bother.KMA
I don't think it's just woodmaxx a lot of companies are getting to were it doesn't matter if you buy or not. Sorry you had that experience .
What model and hp is the blue tractor?
1725 and its 29hp
Update? Is it still running well? any problems?
We got a trackhoe and sold the backhoe
Where's the stones,no rocks.
Still using this implement? How's it working for you..
sold it and got a small Excavator Yanmar 55
If you buy one, do not put gear oil in the pump, find Something Else. When the pump is running, it has a vent when it gets hot and all you smell is gear oil.
@@hossitis that should be hydraulic oil. 46 for warmer climes.
Good on ya for the excavator. Backhoes definitely have limitations..
It's a pto pump That runs the backhoe The instruction said to use 90w gear oil for the pump. We can have weather here down to single digits
Indian Price
seems kind of sloppy in movements
To big for that tractor
Yeah I was planning on getting a bigger tractor but things didn't work out