It would be helpful for my project!! I have one question! Is it possible makimg the leg parts can be folded by the smartphone controller? Like sitting down and standing up... I really want...this
could it be that the distance between the stepper driver pins is not the same as the stepper drivers in your link? in the gerber file it is 10mm whereas the stepper driver board ist 12.7mm (0.5in)...
It's a very good project. I have a question. After successfully uploading OTG to the broadband....turn on the switch. Does the robot balance automatically or do I need to adjust the PID? Thank you.
It's amazing to know there are techies like you in India too ! Great work man! You are an all rounder.💯
Amazing work bro 😁
Thanks Surajit Brother🙏🏻
OMG! I ordered a PCB using your givefile, but I couldn't install it properly because the a4988 pinhead had a narrow spacing. Is there another version?
Bro my robo cant do stability it's flikking all time and throwing always ground pls ans ..
hi, is that device you press a button or a switch? ciao , quel dispositivo che premi , è un pulsante o un interruttore?
It would be helpful for my project!! I have one question! Is it possible makimg the leg parts can be folded by the smartphone controller? Like sitting down and standing up... I really want...this
It's just amazing 😍😍
could it be that the distance between the stepper driver pins is not the same as the stepper drivers in your link? in the gerber file it is 10mm whereas the stepper driver board ist 12.7mm (0.5in)...
It's a very good project. I have a question. After successfully uploading OTG to the broadband....turn on the switch. Does the robot balance automatically or do I need to adjust the PID? Thank you.
It will balance automatically, You can also do PID tuning using app.
Thank you for Watching!
@proknow What if I am using a 11.7v lipo battery ?
Super...! 😘
Can you provide the esp code to modify pid parameter, thank you so much
Wow ... nice 😃😍🤩
Very nice 👍 so smooth 😍
Nice work!
Really nice Bro ap kon sa camera use krty ho model name
Nikon d5300, but I will not recommend it you for videography.
@@proknow ok 🙂
Good effots brother
Bhai apne padhai kaha tak ki hai...aur ye sab sikhne k liya kon si padhai zaruri hai
Bhia pcb sell karoge?
Can i buy the pcb from you ?
Why esp32 showing me connected without internet?
Bata bhai code kaha se chapa!?
Mai bhe vaha se chapna chahta hu
cool but pls dont use 2014 diy music😂
Inform us when you got hired by space x.
I want to make my own SpaceX😀.
Thanks for the compliment!
Is it possible to have the code?
Wheel diameter?
Bro please make a mini mother board using All winners A13 processor with HDMI display connection please 🙏🙏
I upload the code via OTG but wifi options not showing.. i can't connect the robo with mobile.. pls help
same problem can someone help?
no code ?
Obviously, you need to upload code but because that app provide feature to upload code directly through app.
Wow! Did you do all this programming and design yourself? Looks surprisingly similar to ua-cam.com/video/tZynIj1StpM/v-deo.html
He just copied everything thing and put his name all over it.
@@honeysharma9801The evidence says yes, that's what he did, with minor changes.
Y EL CODIGO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!