How to make a balanced headphone cable for Sennheiser HD 600 series (with 4.4 mm pentaconn plug)
Вставка
- Опубліковано 9 чер 2022
- This cable will make your headphone sound much better, compared to the standard wire. Peter made a 1.3 long edition this time, but Your cable can be made in other lengths too. If you want the same cable but with different connectors (for example 4-pin xlr or 2.5 mm Jack instead of 4.4 mm Pentaconn), we also have many connector options for you!
---
🛒 Order 3.5 mm Jack edition from webshop: bit.ly/3MIG4gq
🎧 High end OCC copper headphone cable by meter: bit.ly/3zr5eNG
4.4 mm Pentaconn Jack connector: bit.ly/39lYg1R
Stopper unit used for this cable: bit.ly/3MSwNCN
Shrinking tubes: bit.ly/3MGbeoy
Cardas Sennheiser HD600 series headphone connector: kacsa-audio.hu/en/webaruhaz/c...
✂ Cutting tool for cable assembly: bit.ly/3aN2JL9
---
Follow us on Instagram: bit.ly/3MI4ir4
Facebook page: / kacsa.audio.hu
---
Thanks for watching! 🎵👍🏼 Don't forget to like, comment & subscribe! - Наука та технологія
Hey!
What spec wire to use? I see 8-strand, up to 150!
What are the tradeoffs in this? i've found some 0.05, 50 strand but, is thinner, better? i see a cardas 80-strand sennheiser hd650 cable but, what strand makes best?
could you let me know wiring of diagram for 2pins to connector.
i cannot understand only youtube video😅
Are the cable welded inside where the splitter is? Or it is a single wire from one end to another end without any joints?
This is 1 single wire.
Well, I could use a set or two of them Sennheiser solder connectors. You forgot to link to them. All the other stuff I have but them connectors I do not. Nothing against Your service but I like to grow my own cables. Happy new Year to Y´all
Thanks for commenting, we indeed forgot to link the Sennheiser plugs. Now it's in the description. These are Cardas connectors by the way. Webshop url: Cardas Sennheiser HD600 series headphone connector: kacsa-audio.hu/en/webaruhaz/cardas-sennheiser-fejhallgato-csatlakozo
USA, Iowa - state
so much information missing...like what lengths of cable did you use, comments on what watch out for, nothing on left & right connections..
No insulation on the outside of the cable?
There is insulation on the outside of each individual cable, it is just hard to see since it is clear.
There is, but transparent.