how to make crossover for speaker?
Вставка
- Опубліковано 14 тра 2020
- electronicshelpcare.net/how-t...
/ electronics-help-care-...
/ pins
electronicshelpcare.net/how-t...
/ electrohelpcare
/ @electronicshelpcare
#amplifier#transistor#circuit# - Наука та технологія
For the circuit diagram please visit here
shorturl.at/FNS56
Your demo is appreciable but background music is not required and you could have used crocodile clips or breadboard for easy connections.
Irritated background music..
Currect.
It would be better without anything
😆😆
A speaker related video with a horsey background music 😆
Yes
Which type of bass get from 15/20uF capacitor to 4 ohm load 🤔... (Bass = 20Hz-100Hz and up to 250Hz max, beyond that is called midrange frequency .. Lower mid to upper mid and after high frequency )Which formula u are used 🤔
No need for high voltage capacitor!
And you can also use here polarized capacitor. So 10uf for the vocal and 2.2uf for the tweeter!
Hi. Can you pls write the complete specs of capacitors for tweeter and vocal speaker. Thanks in advance.
How can we use polarised caps in AC circuit?
@@RajRaj-yp5kx you can put two polarized capacitors in series.
@@koonjulougrasen4432 they must be back to back - not just in series
You put sound too high and then it sucks, too much distortion! Use lower volume and more microphone volume when recording the video!
i feel the music😂
Very cool!
Nice kaibigan watching may natutunan nanaman ako mahilig ako mag kukutingting
So many people asking where to buy components!! Try using the internet that's in your hand. You know what you're watching UA-cam on. Just do an internet search. Is that so hard? There's hundreds of places to buy speaker components. Hundreds.
Bravo excellent project
Question. What's the black thing your using for soldering?
Paste
hey ,you used a 200w 8ohm woofer 4 a 100w 4ohm mid and a 3w 6ohm tweeter , what is the end ohm value as you connected everything in parallel ?
I don’t know what it works out as but I know that’s a ticking time bomb 💣
Hi are u in India.? From where did you brought 200 watts lg speaker?
I have a cuckoo clock melody circuit that is connected to the 8ohm 0.5w speaker and I want to replace it with the 8ohm 1w speaker. When I connected it the output was not that much great as the 0.5w speaker. What will change do I need to do?
look at the SPL [efficiency
Preciso de indicação do(a) Senhor(a), para um circuito ATIVO TRI WAY e ou TREE BAND AMPLIFIER, baixa potência. Esclareço: - três circuitos independentes com seus 3 amplificador operacionais, fonte SIMÉTRICA comum a eles, circuitos quase iguais e sintonizados ou filtrados por R/C simplificadamente na entrada de áudio. Veja que não é Pré. É simples, mas é Amplificador e sem potenciômetros nas tonalidades. .Por favor. Muito obrigado.
if i make two of this sets what elsd will I need to create stereo (left right speaker set) that I can connect directly to my 3.5 mm jack audio output from my smartphonr?
You would need a head unit to separate the channels and be able to control both amplifiers
Does the wattage of speaker depends on how much uf u put ?
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
very nice as always
I know, you don’t know what you doing.
😁
I love musin,,nice wiring keep it up,,tusok done
Nice video. By the way, what's the name of that stuff that you use to clean de soldering gun? I can't remember it now and I need it, but first I need the name. Anyone can help me out please? Thanks
Fluxs
It's soldering flux. It's in the paste form packed in small sheet metal container.
Available in electronic components shop.
Can anyone tell the name of the music he was playing through the speaker?
The middle driver is a (full range) driver while the right one is a toy or tv speaker, often full range minus the bass.
Your music background make your video not good.
That is 20 watts sub plus 10 watts right
What's the name of the subwoofer is used in this tutorial?
He name's Bob
Very nice, throw it much better!!!
Apakah capasitor itu bisa di pakai untuk semua jenis speaker (besar maupun kecil)
Bro in hand assemble woofer how we know the moms and watt pls explain
What is the Circuit board name?
How bad can a video of speakers be? This guy: YES
Sir i have kenwood ksc-sw50 how i attach vocal kindly
How is it the speakers are always in the open and no enclosure while testing.they are bottoming.please explain.
4 ohms mix with 8 ohms for sure u will burned the amp, distortion sound! meaning the amp is pushing lot power to the 4 ohm speaker
Thats what im thinking too... 200 watts with 100 watts.... There will be a distortion on the sound
When I saw that he was mixing ohmage, I just had to finish watching the whole thing. 😂
That doesn't matter one bit the caps change resistance duh....have you never taken apart a home audio speaker or a bookshelf speaker......obviously not lol.
@@neverman3398 yeah...me to.
He just mixed ohm.
Deadly...😅
Dose that work with car audio I know it works on house speakers
You r using capacitor for midrange spk. You should use low pass filter or crossover for subwoofer. Don't use irritating background music which ends with headache.
U can’t use dc capacitors in a output of a amplifier output from a amp is AC. U must use bipolar capacitors or you will blow your speakers and amplifier
Yes you are right
Mayron ako mga speaker sa bahay hnd ko pa na kuting ting salamat sa pag bahagi ng video good bless
sir 40 watt 4 ohm ke sat kitne watt ka Tweeter lagane chahia
would that circuit make overload the amplifier? i would rather stick to 8 ohm method. Rather than this kind of circuit.
Thanks 😊
Switch the wires around in that music drives me nuts OMG I feel like I'm in a circus
Very good n very nice.very important video for me... congrats to you sir for this video uploaded
Subwofer Speekers Don't Need Capasitor, But For Midrange Speekers ( 4.Ohm , 100.watt ) Need Condensator 47.Mfd , For Tweeters Need Condensator _ 3.3 Mfd , .... Thanks For Sharing , ..... Cheerio.🌠👍👍👍🌠🌠🌟🌠🌠.
Everything sounds like a tweeter from here
I didn't know there was a "medrance" speaker, what is it for? Does it dance in a trance the medrance?
electronicshelpcare.net/led-music-level-indicator-circuit-diagram/
Man i really love my "Twitter" crossovers
subwoofer modul no.?
Subwoofer Brand? And model?
He connected capacitator parallel to speaker?
i need a 3way crosseover . my speaker is eminence DELTA 12 FA ,and i have use Mid section a Ahuja horn unit and HF driver is L acoustics [10 ohms]
LF Frequency 100 Hz to 2 Khz
Nominal Impedance* 8 Ω
Power Rating*
Program Power 1000 W
Watts 500 W
MId 800 Hz to 6.5 Khz [ Its need a extra volume knob ]
Impedance: 16 ΩInput Power: 40W RMS/60W Max.
HF 7000 to abow [10 Ohms]
I expecting you do needfull
Hey bro i like ur video where did you buy the 200w speaker?
Something like them come in Sony 5.1 home theater system...are even j.v.c gig a tube stereo system -
4x 8" subs and mids
Name this musica?
Can you make the tweeters resist more watts adding a resistance?
No way.
Adding a resistor will just drop down the voltage going to it
I want the equivalent circuit for speaker
Pls.i need it
Based on the speaker crossover bass coil output of 300w, how many mh is the air core coil?
Dos de1.8 uf 400 V funciona?
😂😂😂 у тебя среднечастотник УЖЕ как твиттер работает😂😂😂 зачем ещё один?
You got the wires crossed that's why all the music gets lower when you connect all the speakers
Sounds kamala bro
I feel the Bass
That is a wofer mid range speaker and tweeter a network is a must for good quality sound
woofer
Love from Odisha
Nice 👍🏻👍🏻 🇮🇳 || Kuki
boss ask k lng may idea k n 12" speaker n mdyo mura lng pro ayos ang quality,,,,salamat
Tweeter left from the chat
In the thumbnail; did you mean to say 'Twitter'??....cause it's Tweeter.... 🤷♂️
Thanks for the video, very educative, but next time you can use something called cropping to make it shorter
Woofer speaker link pls
এল জি উফার স্পিকার টা কোথায় কিনতে পাওয়া যাবে ?
Tweeter 4,7 uf ac capacitor! No use dc capacitor!! By italy
He used a non polar capacitor 🤷♂️.
100v, 1.5uF non polar capacitor.
Best video
Please write circuit diagram to more understand for...
Use aligator clip or solder it
you didnt even know what the hell you are doing 😂
😂
Tooooooooooooo true! It is a real clown show
As though I have no total knowledge to combine either this Stereo or worse the Mono circuit systems
a los medios de📢 22mf 33mf y a ese tweeter 📣1.5mf 2.2mf saludos 😀
Great
Medrance?
Background music not comfortable
Plz background song link send me
What a greate video bro I much like your video
Owner left the group
Please visit for circuit diagram
www.pinterest.com/electrohelpcare/pins/
Nyc
1st comon finally 😌
Crossover of a 5 way speaker?
Mantap sekali
बोल कर वीडियो बनाया करो प्लीज हम आपका वीडियो देखते हैं
Ano ano materiales gamit mo
how about 500/watts
Ademas de todo lo anterior, estan conectdos fuera de fase.
Nice Twitter😃. I think You do not know what You do.
🤣😂🤣😂🤣 right
Ah, the TWITTER
next time use alligator clips its much easier
Make sure they are not polarized
In midrange itself treble is coming
Correct and his missing the low mids that the midrange speaker 🔊 can produce. Also it’s not a good idea to mix ohms on speakers. lol
How to make Spaker and woofer No use twitter please
Hello Sar aap kaise hain hamare pass Ek Ahuja srx 500 Watt sound hai jo ki jo ki iska network freight Jal chuka hai yah network plate Ban sakta hai ya nahin Ban sakta hai isliye video Banai Gai Nahin to ismein kaun sa conditioner lagega video Banakar bataiye is per jaldi se video banaen
It's so cool, man
Music pls