Lexus IS300 HID BiXenon Projector Headlight Retrofit Wiring | Panamera DRL Shrouds Part 2

Поділитися
Вставка
  • Опубліковано 1 лип 2024
  • We complete the BiXenon projector retrofit on 2001-2005 Lexus IS300 Headlight using NHK G5-BRT (Hella Replica). We bake the brand new OEM housings open, install the projectors previously fitted and wire up all the DRLs, turn signals, and high beam BiXenon.
    To fit it nicely, we use a Morimoto Profile Panamera DRL shroud with switchback turn signals. The NHK G5-BRT is one of many G5 projector variants made by NHK. This version has one of the best outputs thanks to a special lens coating. The bowl is same as other G5 variants.
    Since I got these in Sept of 2020, the BRT has sold out and been upgraded to a v2 version. The BRT have the coating and non-screw shaft.
    Easiest DIY Ceramic Coating System on the market.
    Use discount code (tunerwk25) for $25 off your order.
    avalonking.com/products/armor...
    G5-R (standard) - ebay.to/3PzB5Bg or s.click.aliexpress.com/e/_AO8tcR
    G5-BRT (Non-Branded) - ebay.to/3PD4r1S or s.click.aliexpress.com/e/_AUHs3D
    NHK G5-R - ebay.to/39Iu159
    NHK G5-BRT - s.click.aliexpress.com/e/_9va4pl
    Newer NHK BiLED - amzn.to/3GfmSW8
    NHK D2S Bulbs - s.click.aliexpress.com/e/_9JyHQ3
    Panamera 1.0 Shroud (installed) - ebay.to/3wBZgrA
    Panamera 2.0 Shroud - ebay.to/3lunbmf
    9005/9006 Splitter - amzn.to/3LCHBnG
    AliExpress RGB Demon Eyes - s.click.aliexpress.com/e/_99tbmT
    AliExpress Hardware Kit - s.click.aliexpress.com/e/_9yqfLV
    Weather Proof Plugs - amzn.to/3G7gSyu
    Headlight Pry Tools - amzn.to/3yWIncJ
    OEM Right Headlight - ebay.to/3NtuSFd
    OEM Left Headlight - ebay.to/3PFgviX
    Ballast Potting Mix - amzn.to/3x1eXbB
    Soldering Iron - amzn.to/3rGNgzL
    Heat Shrink - amzn.to/3wKyegs
    ----------
    Support the Patreon: / tunerwithkids
    Merch Available: teespring.com/stores/tuner-wi...
    Follow Me on IG: / tuner_with_kids
    TikTok: @tunerwithkids
    For questions and inquiries: tunerwithkids@gmail.com
    -------------------------
    #HIDRetrofit #IS300 #Altezza
    0:00 Intro/Bake Open
    3:25 Wiring/Soldering
    4:25 Testing DRL/Demon Eyes
    5:10 Ceramic Coat
    6:33 BiXenon Wiring
    7:15 Car Wiring
    10:05 Output/Drive
    12:30 Daytime Shots DRL
    Disclaimer: "Tuner with Kids", the alias for the human content creator for this UA-cam channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.
  • Авто та транспорт

КОМЕНТАРІ • 33

  • @F06M6
    @F06M6 2 роки тому +3

    Wow, they look completely OE! Like the car came with them from the factory. Great job man!

  • @zZiL341yRj736
    @zZiL341yRj736 2 роки тому +4

    Transplant, ok so this man is secretly an Asian doctor.

  • @jakes2311
    @jakes2311 2 роки тому +1

    Looks great bro. Very clean

  • @graffer89
    @graffer89 2 роки тому

    That's a huge change, and a clean job, I personally would change the turn signal bulbs to amber, but apart from that thing, it's perfect.

  • @charlestannehill7537
    @charlestannehill7537 2 роки тому +1

    I can relate to this dude so well. Subscribed. I've been a content consumer for so long. Time to start making videos.

    • @TunerwithKids
      @TunerwithKids  2 роки тому +2

      It’s a hard life to be a content creator.

    • @charlestannehill7537
      @charlestannehill7537 2 роки тому

      @@TunerwithKids if you rely on it for stable income, yes. I already get paid for the work I do at home. So it would be supplemental. But the knowledge and creativity I could pass on would make me feel good if it helps someone else.

  • @junehp3507
    @junehp3507 2 роки тому

    Full video would be nice....awesome build...👍

    • @TunerwithKids
      @TunerwithKids  2 роки тому

      That the second half. Watch the first video before this.

    • @Proxy_Lexi
      @Proxy_Lexi 2 роки тому

      @@TunerwithKids I'd like to see how you wired up the DRLs and the demon eyes.

    • @TunerwithKids
      @TunerwithKids  2 роки тому

      Power and ground? I showed the wires and wiring diagram in the video. Did you watch it fully thru?

  • @vVeazel
    @vVeazel 2 роки тому

    Nice cutoff and beam pattern. Sure beats the VLANDs.

    • @TunerwithKids
      @TunerwithKids  2 роки тому

      HID still king of the automotive lighting. If it’s got a good projector and install. None of that PnP BS in halogen reflector or projectors.

  • @ericludington6622
    @ericludington6622 Рік тому

    The headlights look really good , what suspension do you have on the car

  • @Thulebeez
    @Thulebeez 2 місяці тому +1

    Dude great video i just want to buy them from you and slapped them on IS or you can make them and sell them thank appreciate you skillz.

    • @TunerwithKids
      @TunerwithKids  2 місяці тому

      this would be expensive to buy from anyone plus the OEM headlights are no longer available. I got lucky and got some of the last sets left in production.

  • @edmondchan2361
    @edmondchan2361 Рік тому

    I managed to buy some retrofitted altezza headlights, but i think the guy retrofitted it improperly as they just added the projector - so i retained my HID output. Since the swap i think my visibility and brightness got worse. It looks really good tho but driving at night is pretty sketchy. Got any ideas on how to improve the visibility?

    • @TunerwithKids
      @TunerwithKids  Рік тому

      Aim them on a wall. They are probably too low or too high.

  • @Juan_T1
    @Juan_T1 3 місяці тому

    How do you mount the shroud into the projector? seems like you only pop them in
    Without anything
    I’m trying to do a retrofit myself
    Thank you

    • @TunerwithKids
      @TunerwithKids  3 місяці тому

      Shroud is designed to snap on. It’s pretty tight.

  • @BWTECH0521
    @BWTECH0521 2 роки тому +1

    Binh, I have a small YT channel, similar content. I also have kids. Do you also shoot videos late at night after the kids go to sleep? 😁

    • @TunerwithKids
      @TunerwithKids  2 роки тому +1

      Yea all my content is between 9pm and midnight. No projects during the day or when kids are home.

  • @TopJoo7
    @TopJoo7 Рік тому

    Binh low key looks down on VLANDs and so do us.

    • @TunerwithKids
      @TunerwithKids  Рік тому

      My HID projectors kill any aftermarket LED on the road. Love driving my IS300 and Sienna at night with the HID projector retrofits.

  • @Juniorrrrrm
    @Juniorrrrrm 2 роки тому

    Im from central florida would you make something like this for me i bought some new headlights and pay you? So bright im a lights fanatic

    • @TunerwithKids
      @TunerwithKids  2 роки тому

      Sorry. I don’t do this for others. I show you guys how to do it via videos.

  • @ankieu3350
    @ankieu3350 2 роки тому

    Anh binh Anh co sua xe cho khach ko

    • @TunerwithKids
      @TunerwithKids  2 роки тому

      Asking if I fix others cars ?

    • @ankieu3350
      @ankieu3350 2 роки тому

      Yes

    • @ankieu3350
      @ankieu3350 2 роки тому

      I have rc f 2015 need upstream 02 sensor replace.after I have check engine.my car run like shit.lost torque.I go to the Dealer thay say they not do replace because I have after market header.

    • @TunerwithKids
      @TunerwithKids  2 роки тому +3

      Nope. Only work on my own cars and projects.