@@Iazibones ah okay yes these are the Flywheels 😍👌🏽 to be honest they're super good totaly good grip and sound,but they're shredding your darts a little bit but for me I had many to test these are my absolute favourite ones 👌🏽
Hey my Friend, I don't think so that it works with stock wires and switches because you use more voltage batterys/lipos on this kits.,maybe if you use normal batteries it could work but than you have no more power than Stock stryfe. What's your problem now? Nice regards stay safe ✌️🏽 😊
Senior XJ Hi my friend You can buy them from etsy the man is from Germany like me but they ship worldwide I think and here's the link. www.etsy.com/de/shop/DevilZNerfworks?ref=s2-header-shopname Nice regards
the Chinese at the first is 1 go to Taobao and follow the instructions there 2. use 12.9v - 14.8v for the better preformance 3. useACC0.5 rounds to shoot more accurately
You're right but I would only go above till 3s lipo fully charged till 12.6V.what type would be 14.8V? Fully charged 4s lipo is 16.8V I think that's to much for this Motor some type of vamp motors will run best on 2s. Nice regards
Hey mate no you can't that's not enough power to spinn the flywheels. Minimum the voltage Mod or 2s lipo but I recommend 3s lipo for this motors. Nice regards
chris soto hi my friend you can find them on etsy the seller ist from germany but I think they ship worldwide www.etsy.com/de/shop/DevilZNerfworks?ref=s2-header-shopname
Anirudh Kansra yes for sure the hole process is the same but you need the correct flywheel cage kit for your gun this one here should fit for the stryfe maybe for the Nerf Rebelle Rapid Red also. Hope this helps you Nice regards
I don't think that the pipe is 100% necessary but with the high power darts comming out it should have a reason why they put this pipe into the kit. Nice regards
Hey my Friend, As you can see in my video you have to look everywhere your flywheel can touch the plastic no stryfe is 100% the same inside, or maybe you pushed it to much on the motor shaft? Nice regards
Awesome! I have the orange vector kit on my OJ stryfe.
Nice mate it looks so cool.
Nice regards
I have 2 questions; 1. Can you use imr's for this? 2. Did that wheel with the wires come with the kit?
Hey my Friend yes should work 😉👍🏽
You mean the Flywheel cage?
@@a-ztube I mean the red wheel at 1:53 near the top right corner
@@a-ztube not sure if it's wires
@@Iazibones ah okay yes these are the Flywheels 😍👌🏽 to be honest they're super good totaly good grip and sound,but they're shredding your darts a little bit but for me I had many to test these are my absolute favourite ones 👌🏽
@@a-ztube also, at 6:34 what is the transistor?
subbed
I have the same kit, is there any way to use stock wires/switches instead of installing micro switches? I keep having no luck no matter how I try it
Hey my Friend,
I don't think so that it works with stock wires and switches because you use more voltage batterys/lipos on this kits.,maybe if you use normal batteries it could work but than you have no more power than Stock stryfe.
What's your problem now?
Nice regards stay safe ✌️🏽 😊
Where did you buy the clear motor covers from?
Senior XJ Hi my friend
You can buy them from etsy the man is from Germany like me but they ship worldwide I think and here's the link.
www.etsy.com/de/shop/DevilZNerfworks?ref=s2-header-shopname
Nice regards
Nice vid i give you like and sub.
Thank you very much ☺️👍🏽 you're very welcome.
Assalamu aleikum wr wb.
Nice regards from Germany
i really dig ur thumbnail keep up d goodwork!!
GENJI 411 hey my friend THX so much 👍🏽
You too I see you have nice VIDS also
would you like to sub to my channel too?
pls it helps a LOT lOl
GENJI 411 for sure mate
You actually don't need to cut holes in the back you can just remove the plastic Motor posts
Sometimes you have to in mine it wouldn't fit 100% without doing it but anyway I wanted to put on an cover 😉
Nice regards
Where did you buy the Cover for the flywheels ??
Ich denke du meinst wo ich die her habe?
Über etsy glaube sogar bei einem deutschen Händler 👍🏽
LG
To replace the cage do I have to change the motors
Hey mate,
You want to put in the Metall cage but with stock motors?
Nice regards
Hey man I’ll just replace the flywheels
Did u hot glue the red and black wires in the beginning?
No mate
Nice regards
the Chinese at the first is
1 go to Taobao and follow the instructions there
2. use 12.9v - 14.8v for the better preformance
3. useACC0.5 rounds to shoot more accurately
You're right but I would only go above till 3s lipo fully charged till 12.6V.what type would be 14.8V? Fully charged 4s lipo is 16.8V I think that's to much for this Motor some type of vamp motors will run best on 2s.
Nice regards
@@a-ztube honestly I'm a noob and just started this hobby
i might go ask the creator on tawbao about this
my pack will be coming today and i will try and test it out with their 3s lipo
Yes these motors work perfect with 3s
👍🏽
@@a-ztube hi did you solder the wires or you just tied them?
my solder is not working
Can we use regular aa batteries for this kit? Plz Reply
Hey mate no you can't that's not enough power to spinn the flywheels.
Minimum the voltage Mod or 2s lipo but I recommend 3s lipo for this motors.
Nice regards
where did you get those flywheel cover
chris soto hi my friend you can find them on etsy the seller ist from germany but I think they ship worldwide
www.etsy.com/de/shop/DevilZNerfworks?ref=s2-header-shopname
Can we use this mod to any other gun .plz reply
Anirudh Kansra yes for sure the hole process is the same but you need the correct flywheel cage kit for your gun this one here should fit for the stryfe maybe for the Nerf Rebelle Rapid Red also.
Hope this helps you
Nice regards
@@a-ztube you might be able to fit it in a cam ECS
MNemJef what is this my Friend?
@@a-ztube you can fit stryfe cages in the nerf cam ecs
And is the pipe necessary
I don't think that the pipe is 100% necessary but with the high power darts comming out it should have a reason why they put this pipe into the kit.
Nice regards
You can cut the pipe so you can put your barrel attachments on
Or just cut the attachments
What battery you use?
Assalamu aleikum...
In this Vid I use normal battery but I also use 2s lipo and 3s lipo much more power.
Nice regards
@@a-ztube you think better 2s or 3s?
Yes for sure 100% better both is very nice 👍🏽
HELP! me plz my upper flywheel keeps jamming how do i fix that
Hey my Friend,
As you can see in my video you have to look everywhere your flywheel can touch the plastic no stryfe is 100% the same inside, or maybe you pushed it to much on the motor shaft?
Nice regards
Also where do u find this kit?
Hey mate,
Both kits from Worker The link is in my description you can find it at Bangood
Nice regards