Thanks for the repair on this code by cleaning the sensor but where is the oil leak coming from, all of that needs to also be cleaned and ask the customer to stop back next week and probably again in the future so you can monitor that leak from the hose coupling at the cooler or the cooler itself is leaking and why is there so much blowby, cheers.
Had the same issue on my 2018 Navara. Replaced the sensor and everything went well until I drove it again. Car went in to limp mode and showing the same code. Any other sensor or item to check? 😢
Hai sir im from malaysia.😮Manual car sir?i saw you vedio, Why rpm at 3000 only when you press the acceleration (gas). But when running car rpm normal over then 3000rpm. Then when car not running, paking (idle) and press the acceleration (gas) rpm 3000 only. Why, how to slove?
When driving the vehicle wasn't allowed to cross 3000 rpm, also in park. I cleaned the intercooler pressure sensor and was able to get the vehicle to respond again. I cleaned it with some electrical spray.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Nice work!....as usual. I bet most guys would've replaced the sensor without even looking at it. I like how thorough you are .... I am the same way
Appreciate the comments bro.
Thanks for the repair on this code by cleaning the sensor but where is the oil leak coming from, all of that needs to also be cleaned and ask the customer to stop back next week and probably again in the future so you can monitor that leak from the hose coupling at the cooler or the cooler itself is leaking and why is there so much blowby, cheers.
👍
Do you have a video on how to clean the sensor?thanks
No, sorry
Tengo el mismo problema, como lo solucionaron ?
I hope you get through. let us know if you do and what you did
Have the same
Problem how did you solve it
Where is the sensor located.
Behind the front bumper
@@djmobileautoservices ok. I dont have it there. My sensor was in the intake manifold. 2016 twin turbo 190 hp i have
Had the same issue on my 2018 Navara. Replaced the sensor and everything went well until I drove it again. Car went in to limp mode and showing the same code. Any other sensor or item to check? 😢
Check the Mass air flow sensor, air filter condition, vacuum leaks or damaged intercooler.wiring connection to that sensor
Maf sensor cleaned, air filter is new as well then no weird sounds indicating vacuum leak. Would EGR and intake manifold cleaning help solve this?
Not sure. You may have to get it checked
Hi bro, i've got the same problem with the limb mode in my nissan navara. Are you located in Jamaica, I would like you to look into it.
Unfortunately I'm not. See if you can get the intercooler check for leaks as well.
I have same problem how doni need to fix
Hi sorry for the delay. Not sure what you asking. Are you asking for my assistance or just stating something
Where is it located
I believe I mentioned it in the video.
Hai sir im from malaysia.😮Manual car sir?i saw you vedio, Why rpm at 3000 only when you press the acceleration (gas). But when running car rpm normal over then 3000rpm. Then when car not running, paking (idle) and press the acceleration (gas) rpm 3000 only. Why, how to slove?
When driving the vehicle wasn't allowed to cross 3000 rpm, also in park. I cleaned the intercooler pressure sensor and was able to get the vehicle to respond again. I cleaned it with some electrical spray.
@@djmobileautoservices thanks advice sir👍
👍