Це відео не доступне.
Перепрошуємо.

Fitting a caravan rear camera - NO DRILLING REQUIRED

Поділитися
Вставка
  • Опубліковано 25 вер 2020
  • How to fit a wireless rear view camera to a caravan without drilling any holes in the body of the van.
    Camera used was the BOSCAM K1 which you can buy on Amazon here.-
    www.amazon.co.uk/Boscam-Wirel...
    10m Extension cable. www.amazon.co.uk/dp/B019XQRDE...
    (NOT an affiliate link)

КОМЕНТАРІ • 17

  • @DTSquared
    @DTSquared  2 роки тому

    Quick update, after about two and a half years the image quality of the camera started to deteriorate. It was still working and usable but a bit over-exposed. I suspect this was either an issue with either abrasions on the lens or possibly the sensor starting to fail. Fortunately, this was easily repairable by purchasing a new camera from a different brand on ebay for about £12. The mount was slightly different, but I managed to use the same bolts to attach it. The wiring (video lead and power lead) worked without modification. I would recommend checking the voltage and polarity but if you have this issue the at least you can have some confidence in a simple and inexpensive repair option.
    Here's a link to the replacement camera I purchased, please be aware that this specific camera may not be available indefinitely but there are a lot of other very similar options available. www.ebay.co.uk/itm/353946241899

  • @TheHappyPensioners
    @TheHappyPensioners 2 роки тому

    Well, what can I say, only the second of your videos watched, and both extremely useful, more than that, brilliant. Thank you for posting.

  • @terencelongstaff4287
    @terencelongstaff4287 3 роки тому +1

    Many thanks, much obliged, Terry.

  • @johndn9238
    @johndn9238 2 роки тому

    Very helpful. I've been wondering how to get the cable from my camera into the van (also a Unicorn) without drilling and you've provided a very helpful clue. Any thoughts on avoiding glare from the sun? The lower the camera position, the trickier this becomes.

  • @sooty1410
    @sooty1410 2 роки тому +1

    I have a similar system made up of components from ebay. I get sporadic interference too and I'm pretty sure it's because the wireless link to the monitor uses the same frequency range as domestic wifi and Bluetooth systems. If you pass by a particularly strong signal source it will swamp the camera output.

    • @DTSquared
      @DTSquared  2 роки тому

      Totally agree there's a lot of wireless gear in and around cars these days so the frequency spectrum is pretty congested. It certainly hasn't been a major issue for us. Kudos for building your system from components.

  • @victorkent768
    @victorkent768 3 роки тому +1

    I'm not one for buying lots of toys for the caravan but like the idea of this Dave. I wonder if you had 2 cameras you could fit one for the back of the car handy for hitching up as well as normal reversing. Nice one

    • @DTSquared
      @DTSquared  3 роки тому

      We have a reversing camera built into our car and it certainly makes hitching much simpler, especially if you are on your own.

  • @brentandkimfourie2767
    @brentandkimfourie2767 2 роки тому +1

    I think that you’ll find the interference is caused by UHF radio transmissions close by. Most wireless camera systems use UHF frequency and are affected by UHF radios being used close by.

    • @DTSquared
      @DTSquared  2 роки тому

      Yes I'd agree. As I mentioned in the video at 4:36 the interference tends to come and go as certain other vehicles are nearby so it's much more likely to be transmission from another source so fairly unavoidable at this sort of cost point.

  • @keithalangrundy8009
    @keithalangrundy8009 2 роки тому +1

    DT how is the Boscam working as you have had on for a while? thinking of getting one after seeing your video.

    • @DTSquared
      @DTSquared  2 роки тому

      Still working fine. I thought the picture quality had got worse but it turned out the camera just needed cleaning 😂. Certainly nothing to report that would dissuade me from recommending it.

    • @keithalangrundy8009
      @keithalangrundy8009 2 роки тому +1

      @@DTSquared thank you. Will go for the kit.. I ave a twin axle bailey black edition so will be following your video step by step. Although just wondering if I feed the wires in the Ben in front locker rather than by fridge.

    • @DTSquared
      @DTSquared  2 роки тому +1

      @@keithalangrundy8009 Yeah I made life harder for myself bringing the cable in sooner (I think I got it into my mind that I would get 12v feed from the fuse box under fridge originally and then didn't change my wiring route once that option was ruled out.) I don't think there will be a huge issue taking the cable along the chasis all the way to the front locker. You should definitely make sure the transmitter is as far forward as possible though.

  • @paulgregory3133
    @paulgregory3133 3 роки тому +1

    Dave could you tell me we’re you acquired your 10 metres extension cables from

    • @DTSquared
      @DTSquared  3 роки тому +1

      Hi Paul, I thought I'd answered this before but can't see it on the comments. If you search on Amazon for this "oCar RCA video cable with red reverse trigger lines for car rear view camera, monitor camera, CCTV LED connection" you should find it priced about £12.99. I'll see if I can put a link in the description also.

    • @paulgregory3133
      @paulgregory3133 3 роки тому

      Thank you much appreciated