Hello, I have Asus tuf gaming LC 120 liquid cooling. It works fine but the RGB is off. When I open the back of my case, a cable with a 3-pin (ooxo) female input is lying idle. I think it's rgb connection. where should i put this? My motherboard is asus pro b550m-c csm. The only 3-pin input on the motherboard is the pin with the name "chassis" on the intrusion header.
Hello friend good video I have a question, where do you connect the RGB of the fans and the cooler I do not have that port (Led_C1) but I do have others but nothing else with 3 pins (D_Led1), I can connect the RGB in the 3-pin ( D_Led1) ? I have a GT301 case from asus tuf it also has those connectors on the back can I install them there?
when i was installing this i was about to having a mental fucking breakdown at how tedious it was to just mount the bracket, this is the only bad thing about this aio
@@itcarecomputers do you think it's normal for the ryzen 5600x to hit 70 degrees with this water cooler? Do you think that among those we have on the market, is it a good investment or not?
I bought it but I'm thinking that it's not as efficient, but since you've already tested it several times, what do you think about this tuf, I ask because I don't speak English, I'm using the translator
HI! Could you,please,tell me if this Asus 240mm AIO will be compatible with my MSI Z490-A PRO ProSeries ATX Motherboard (10th Gen)? Somebody can give this AIO to me...Thank you! Thank you for a nice video.
hello friend, i have a question, how to can i change the colors of liquid cooler? i have a gigabyte b450 pro wifi and i connected the RGB in LED_CPU , GREAT VVIDEO
Please can you offer any guidance anyone. I've clipped one half of the cooler block to the pre installed amd brackets. But when I try to line the other half up of the cooler with the thumb screw bit, no matter how much pressure I apply the screw won't co me through enough. Any ideas ?
Hello, could you please help me with my issue? I had the pump RGB working, the fans turned on but the RGB is not lit up! what did I do wrong? I have the same AIO cooler with tuf z590-plus motherboard
Sure. You connect rgb connector wrong Check on rgb both connector there will be an arrow when you connect Rgb connector both arrow should be same side then rgb will work
@@itcarecomputers thanks for the reply! I did do that tho, but it still doesn't work somehow. Can I send you a video of my setup and maybe you could see what's wrong via email?
Thanks so much. There were no instructions in the manual for attaching cables. Greatly appreciated.
Always welcome
Tooo thank you, I don't know how to connect the wires, but this helped me so much thank you!
thanks to this video, I have completed everything completely. thank you for making a detailed video.
Welcome & don't forget to subscribe ❤️
Straightforward and clean installation.
thanks bro it helps so much for the attachment of cables ^^
good job
Thanks 🙏🤗
Welcome 🌹
Very good airflow in that case, if you put the side panel on, the only fresh air coming in the case is from... uhm... is not.
lol, thought you were being cheeky..but all his fans are exhausting!
Hello, I have Asus tuf gaming LC 120 liquid cooling. It works fine but the RGB is off. When I open the back of my case, a cable with a 3-pin (ooxo) female input is lying idle. I think it's rgb connection. where should i put this? My motherboard is asus pro b550m-c csm. The only 3-pin input on the motherboard is the pin with the name "chassis" on the intrusion header.
Where did you get the black base to install cooler over processor? Mine doesn't have that
It's come with liquid cooler
Check again in box it should be there
Hello friend good video I have a question, where do you connect the RGB of the fans and the cooler I do not have that port (Led_C1) but I do have others but nothing else with 3 pins (D_Led1), I can connect the RGB in the 3-pin ( D_Led1) ?
I have a GT301 case from asus tuf it also has those connectors on the back can I install them there?
Yes you can connect with case if there are 3pin connector otherwise you have to buy controller
You don't recommend applying a third party thermal paste for better thermals?
It's depends on you
i cant fit the plastic loop just want lock into place any clue
Hi question, when i install my asus tuf lc 240rgb the light indicator is only white? why but it's booting fine
Please answer Thank you!
welcome back legend
Thanks bro🌹
Thank you!
when i was installing this i was about to having a mental fucking breakdown at how tedious it was to just mount the bracket, this is the only bad thing about this aio
Is this cooler ok for an Ryzen 7700X or 7800X3d or should i buy a bigger/another one. I am new to liquid cooling, so thx for any answer.
Yes
@@itcarecomputers yes it is or yes i should buy another? 😅.
Thx for your answer.
En mi mother no encuentro ninguna conexion como aio_pump o algo así, solo cha_fan o cpu_fan, puedo instalar la bomba en el cpu fan?
Iis it suitable fir rayzen 3600 along with msi 450 motherboard, what is ur max temp?
You know if this is compatible with 12th generation of Intel processors?
No this model not support LGA 1700
It does now. I have one in stock now building for a friend and it has the 1700 socket stickered bag
Is the thermal paste that comes with it good? Or is it better to switch?
Thermal paste that come with its good
@@itcarecomputers do you think it's normal for the ryzen 5600x to hit 70 degrees with this water cooler? Do you think that among those we have on the market, is it a good investment or not?
I bought it but I'm thinking that it's not as efficient, but since you've already tested it several times, what do you think about this tuf, I ask because I don't speak English, I'm using the translator
@@artorius_q this is good enough for Ryzen 5600
HI! Could you,please,tell me if this Asus 240mm AIO will be compatible with my MSI Z490-A PRO ProSeries ATX Motherboard (10th Gen)?
Somebody can give this AIO to me...Thank you!
Thank you for a nice video.
Thx!!!
cpu thermal paste is not required?
No there's already thermal paste
Can you control the RGB with this motherboard? If so, which software?
you can control with any rgb software just connect 3pin argb connector on motherboard
Can u change the colour of the fans and the pump ?
hello friend, i have a question, how to can i change the colors of liquid cooler? i have a gigabyte b450 pro wifi and i connected the RGB in LED_CPU
, GREAT VVIDEO
Try with rgb fusion 2.0 software
Please can you offer any guidance anyone. I've clipped one half of the cooler block to the pre installed amd brackets. But when I try to line the other half up of the cooler with the thumb screw bit, no matter how much pressure I apply the screw won't co
me through enough. Any ideas ?
Hey, I’m having the same issue how did you solve it?
ΠΗΓΕΣ ΝΑ ΜΟΥ ΚΑΤΑΣΤΡΕΨΕΙΣ ΤΗΝ CPU ! Thank you very much !!! Much Love!!!
Does this come pre-filled with coolant then?
what are the ambience temp?
Full load 70 to 80. And normal 45
Is it a sealed unit? Does it need coolant?
Yes it is sealed and no need coolant
Hi friend o have a question, is it not necessary to add thermal paste for the installation? Thanks
Thermal paste is applied already no need add paste
Can i install this system on a old mother board? Asus p8h61-mle
Yes you can
@@itcarecomputers Thank you.
Hi are the fans loud?
Not much , Normal
Is this for am5
You still have this WC?
Hello, could you please help me with my issue? I had the pump RGB working, the fans turned on but the RGB is not lit up! what did I do wrong?
I have the same AIO cooler with tuf z590-plus motherboard
Sure. You connect rgb connector wrong Check on rgb both connector there will be an arrow when you connect Rgb connector both arrow should be same side then rgb will work
@@itcarecomputers thanks for the reply! I did do that tho, but it still doesn't work somehow. Can I send you a video of my setup and maybe you could see what's wrong via email?
Where the hell can I find an intel version of this
Next video
is this support 12th genration ?
Yes
@@itcarecomputers no
@@lost_places_global9008 www.asus.com/Motherboards-Components/Cooling/TUF-Gaming/TUF-Gaming-LC-240-RGB/
Why didnt you show how to.put in tye plastic retaining ring on the pump...
Bad video. Nice build.
هل هو مضاد للتسريب
Is it anti infusion
i did not understand your question bro
why is it so bad, so high temperatures
Because of amd cpu
@@itcarecomputers or weak cooler, there must be better, in this times
bro i bought Master Cooler, 28 celsius idle in Windows, 56 in FurMark (Ryzen 5 5600X + RTX 3060 12gb), Ryzen 5900 max 65 Celsius
@@marek8591 which master cooler is it?
@@kyie.wv. ML240L V2 RGB
Don't tell me you're from india