Ordered mine: Channel 1: 2x osram w1 Channel 2: 519 3500k Channel 3: sst deep red I was going for throw/up close, and night vision Is this an ok combo? My first emisar and a bit overwhelmed😂
@@user-og1hb6mv7x i really like it, pretty practical actually. 3500k is great. I asked his advice about regulating the double w1s to 9 amps and the 519 to 12 amp, and if a 45 amp battery would be ok for the osrams. "That is all fine" he replied, so im not sure of he did that or not😆. Ramping up the w1s, they get to the ceiling, a double click for turbo doesnt reall do anything more, so i recon he did? Either way, they get super hot fast and i wouldnt expect much more out of them. I would do that combo again For sure.
@@mtnmnkymilitiayour turbo “not working” is actually a ramp/high level setting…you can have it ramp all the way into turbo or set up your highest setting to under turbo/high which will then make the double click turbo your “highest” setting…sooo many setting for a flashlight I still learn new tricks 3 years later lol
@@FlashlightEnthusiastmy first comment was a mistake. 7H from voltage check, release after second blink, and then do not make an input. 0C removes the “post off voltage” aux setting. Cheers.
I just purchased Emisar D4K and I have a problem with the step down from high mode. My light will stay in high mode about 15 seconds before it will start to dim down to almost moon mode. Is that normal? Thanks.
Just orderded this with CH1: dedomed 5700k 519a's CH2: W2 green CH3: SST20 deep red. I see you're tightening the stainless steel bezel a lot, does it come off by itself?
@@FlashlightEnthusiast What's the difference in brightness having 1 colored light as opposed to 2 colored emitters? I'm trying to decide on dual or triple channels and obviously I'd rather have more colors but if running 1 emitter makes it way less bright not sure I would want triple channels.
That's why I got RGB button. I like to switch between red, green and blue mostly, depending on the day and set I carry. I am not the biggest fan of different colors under the switch, as they do not mix that well
@@FlashlightEnthusiastIs there a difference in xp green and w2 green? I mean does the W2 throw way better? Which do you recommend? Also is 2 519a white for channel 1 enough flood or is it not very bright? You said around 2000 lumens in the video.
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
![21700 Anduril Quads - Compared! [D4K, PL09, TS25]](/img/n.gif)
I found my sample here: intl-outdoor.com/triple-channel-flashlights.html
Just ordered one Sunday, I’ve always had olights just for car work but liking these and I got it in ti and guessed on the lights
Thank you for your thorough review, i own a few hanklights but no 3ch D4K yet, i think you convinced me to change that 😁
Hank lights are great and surprisingly high quality for buying built in a garage. I think Hank deserves an appreciation form us Enthusiasts
another great video brother keep on keepin on ill see you in the next one
Good, see you soon
Wow! Great video.
Thank you!
Ordered mine:
Channel 1: 2x osram w1
Channel 2: 519 3500k
Channel 3: sst deep red
I was going for throw/up close, and night vision
Is this an ok combo?
My first emisar and a bit overwhelmed😂
Che choice looks solid for what you mentioned as your requirements. Congratulations and enjoy your first Emisar 💪
@@FlashlightEnthusiast Thanks!
Subbd!
Interesting Option 👍. Thought about 2x519a @4500 and a blue + red, but ur option is tempting 😉
@@user-og1hb6mv7x i really like it, pretty practical actually. 3500k is great. I asked his advice about regulating the double w1s to 9 amps and the 519 to 12 amp, and if a 45 amp battery would be ok for the osrams. "That is all fine" he replied, so im not sure of he did that or not😆. Ramping up the w1s, they get to the ceiling, a double click for turbo doesnt reall do anything more, so i recon he did?
Either way, they get super hot fast and i wouldnt expect much more out of them.
I would do that combo again For sure.
@@mtnmnkymilitiayour turbo “not working” is actually a ramp/high level setting…you can have it ramp all the way into turbo or set up your highest setting to under turbo/high which will then make the double click turbo your “highest” setting…sooo many setting for a flashlight I still learn new tricks 3 years later lol
The aux light (voltage) while running can be shut off
That's good news. Can you enlighten me how?
@@FlashlightEnthusiast7H from voltage check. Release after second flash and then perform 1C.
@@FlashlightEnthusiastmy first comment was a mistake. 7H from voltage check, release after second blink, and then do not make an input. 0C removes the “post off voltage” aux setting. Cheers.
Looking at getting the Emisar d4v2 . Getting these options what do you think?
OPTICS: 10621 (SPOT)
CH1: NICHIA 519A 5700K
CH2: OSRAM W1 6000K
I just purchased Emisar D4K and I have a problem with the step down from high mode. My light will stay in high mode about 15 seconds before it will start to dim down to almost moon mode. Is that normal? Thanks.
Dual channel vs triple channel?
Which is more battery efficient?
Is triple channel overkill?
Can you do a comparison between Emisar D4K and these cloud defensive lights that sell for hundreds of dollars more?
Can you give me a link to these?
Just orderded this with CH1: dedomed 5700k 519a's CH2: W2 green CH3: SST20 deep red. I see you're tightening the stainless steel bezel a lot, does it come off by itself?
Do you have a review for that Armytek with the emitter swap?
Nope, just the regular version before the swap
@@FlashlightEnthusiast I love to see a review about it with runtimes and more beamshots.
You can watch it here ;) ua-cam.com/video/3cdbF3dh6q4/v-deo.html
I have a skilhunt ec300 that has red blue and green but it doesnt go far at all. It barely lights up a room. I'm sure hanks are way better.
519А 5700к dd + w2 green + sst20 red)
Lovely selection of LEDs! Enjoy it
Why didn't you choose w2 for green? I think I might get 2 519a, 1 w2 deep blue, 1 w2 green.
For sheer curiosity, I know W2 far too well and wanted to try sth else this time. Same with red emitter not being SST20 deep red
@@FlashlightEnthusiast What's the difference in brightness having 1 colored light as opposed to 2 colored emitters? I'm trying to decide on dual or triple channels and obviously I'd rather have more colors but if running 1 emitter makes it way less bright not sure I would want triple channels.
@@FlashlightEnthusiastDid you like the XP green or w2 better?
If you can get blue button with rgb button why get blue? You could have any color button with RGB? Except white obviously.
That's why I got RGB button. I like to switch between red, green and blue mostly, depending on the day and set I carry. I am not the biggest fan of different colors under the switch, as they do not mix that well
@@FlashlightEnthusiastIs there a difference in xp green and w2 green? I mean does the W2 throw way better? Which do you recommend? Also is 2 519a white for channel 1 enough flood or is it not very bright? You said around 2000 lumens in the video.
Except a charging port?
For some it is a drawback, but we have chargers for that ;)
Yeah I’ve never cared for charger ports why I always got magnet charging olights but older ones could use flat tops unlike the newer omes
Just ordered one Sunday, I’ve always had olights just for car work but liking these and I got it in ti and guessed on the lights