2022 Bass Cat Eyra with a Mercury 300R
Вставка
- Опубліковано 13 вер 2021
- At the Bass Cat Boats dealer meeting a few weeks back we got the chance to take a Bass Cat Eyra with the Mercury 300 Racing motor out for a spin and tried to get a sense of the boats top speed, and how it handles at speed. Note watching this on the TV here at the house I finally saw that Kenny got 86.8 mph right there at the end..friggin zoom
#basscatboats #basscateyra #basscateyratopspeed
I have gotten a lot of questions about how my audio has improved greatly, it is the new GoPro Media Mod, see it here amzn.to/3wTQVw5
None of this series is possible without our sponsors, you supporting them supports us:
Waterland Optics code Ken10 gets 10% discount bit.ly/2AqabKo
All 6th Sense Fishing Product at www.6thsensefishing.com are 10% off with code Ken10
If you need to do a little shopping and are willing to help support Ken Smith Fishing please use this Tackle Warehouse link, bit.ly/2S4dFY6 it doesn't add anything to the cost for you but supports our channel, thanks!
We do have the YoloTek discount code for 10-38% off different products, use code KENSMITH at bit.ly/kensmithyolotek
#boatelectronicssetup #bassboattechnologies #transducershieldandsaver
My Instagram page / kensmithfishing2.0
My camera gear
My camera, mount and wind mic for dash footage:
GoPro Black 5 has best set up for external mic amzn.to/3m2DHsL
Rode External Microphone amzn.to/33h8zgK
Waybetter Case amzn.to/2Ziy6VB
Movo Shoe extender amzn.to/35iG8l1
GoPro Gooseneck amzn.to/3jWlQlm
GoPro 3.5 Mic Adapter amzn.to/3idp6bI
Remote power for camera, phone charge or to jump the boat Weego! amzn.to/3ihrCO4
For Transom Mount shots
YOLOtek PowerStick bit.ly/3be8E7K
GoPro Hero 8 Black bit.ly/2uiRPYR .
Guys from lots of trial and error, across my 5 cameras the best disk (and recommended by GoPro for the 7 and 8 series) is the Extreme Pro, buy a 64 or 128 gb here amzn.to/3ieXsuZ cheap!
For some of the same gear I use at a discount check out these sites and discount codes:
The best rods and reels in the marketplace today Lew’s Rods bit.ly/37HLJQf
Lew’s Reels bit.ly/36FJpb2
Best Fluorocarbon and Braided line available at bit.ly/38QpBDm
The BEAST the new Mercury V8 4 Stroke 250 Pro XS bit.ly/2tvlhdR
Still looking for Bigfoot, dude hollar at me at my email address is KenSmithFishing@outlook.com
Make sure and check out my website as well, www.KenSmithFishing.com - Розваги
Amazing footage. Going to to try some of the techniques to see if I can counteract the chine walk on my boat. Also have a feeling that I am also over trimming my boat coming from a 90HP to a 200HP on a similar hull .
Just don’t over trim and check jack plat level.
I think when we come from slower or more under powered boats that is the tendency
Finally.. been looking for the top speed on this setup for a while. Thanks!!!
Bob I think with a hotfoot, blinker trim and a tricked prop there's quite a bit more speed in it
Nice video. Keep up the good work. Take care
Ken looks like you are fast becoming a diehard Bass Cat fan and owner lol👍
WOOOOO PIIIIIIGGGGG!!!!! How 'bout our Hogs Ken!!!!
Soooiiieeeee
Having owned a Basscat PIV with a 3.0 EFI and also a Z521C like Ken’s old boat- neither the Cat nor the Ranger liked too much trim. Much different than the Skeeter ZX200 (my first boat) it liked the trim all the way up and I could drive it with no hands on the wheel. The Skeeter was a kidney killer though!
Someone was generous enough to take me out on his Eyra last year just so I could get a feel for the boat. It's on my short list of potential next boats. I couldn't believe the mid-range acceleration... and that was with a 2 stroke 250 ProXS.... unreal performance, but definitely needs some seat time to learn how to drive it. It fished well but if you're vertically challenged like myself, the lower sitting position in the cockpit makes it a little hard to see over graphs mounted to a BBT style mount. Solid feel and performance like all BBC boats.
Love the shirt Ken!
Going from zero to "HOLY SHIT!" in no time flat.
Right!
GO HOGS!!!!
Very cool!!!
Thanks
Very nice ride! Obviously didn’t appear as stable as your Lynx. Would like to see a walk through of the Eyra next time you are around one.
Will do!
Bass Cats are screamers, and don't like a lot of trim had my 21 Pantera II to 74 and know I can squeeze a tad more out of the Merc 4 stroke. Had I had the room, would be a Cougar in my garage. But my PII is fine for this old man!
Ken just curious did you happen to get a measurement of the deck at the front seat on this boat like you did for your boat review series? I know this wasn’t a typical review. Just would like to know what it is as this is a boat that’s at the top of my list. Thanks.
Justin I don't think I did, sorry.
Hey Ken, thx for the video. Was this 300R rigged with the power assist steering or was it hydraulic? I’ve heard the power assist steering at these higher speeds can be a sketchy.
Shawn if remember right it had the assist. I haven't heard ya or nay on it myself.
Great video, Ken. I’ll be purchasing a new Eyra next year and trying to determine the best motor for me. I know most guys package the Eyra w/ a 250 HP. Are you aware of how the boat will handle w/ a 225 Merc ProXs 4 stroke?
Eddie I haven't seen anybody running that but I'd think still a low 70's boat
@@KenSmithFishing what prop was the 300 eyra running?
FAST KEN!!!! Looks like it has a tendency to rock a little bit, but like you said it is a little bit more narrow than yours. Looking forward to Thursday!!! Thanks.
Any boat at that speed will have some chine walk bud once you get it set right jackplate and trim its very easy to drive.
Mostly that was coming from over trim. Did not see it as much when Kenny was driving. He knows the feel of trim for the cat better.
@@easonterra it was ken’s first time in that boat but didn’t take him long to get the hang of it
@@kennywitek771 300hp is a beast. I do not need anything over 250hp. Safer for me and everyone sharing the lake with me.
@@easonterra hey bud, I’ve ran strokers and a few other fast boats. And I own a eyra now. Just because a boat is capable of 80+ doesn’t mean you have to go that fast. Your vehicle is capable of 100 but you don’t go that fast down the highways.
I just bought an Eyra, what trim setting on the Smartcraft gauge did you have it set at for those runs? How high was the jackplate? I’m trying to dial mine in and it’s a beast!
Jack plate was on 2, very little trim but didn’t see the smart gauge to know the setting, but no rooster tail
@@KenSmithFishing Have you ever tested the cougar? Just curious what the hole shot jack plate you had it on. Possibly about the same as the Eyra? Just getting my new 2023 Cougar fine tuned coming off a 2020 Nitro z19.
Great video and information. What do you have in the way of the new Bobcat?
Bobby I think that is the only boat I didn't get in, I heard several of the dealers say they liked it. i do have some Sabre footage I'll get up soon
Can't afford the boat, but wouldn't mind having one of those steering wheels for my boat. Looks sweet.
I really like it
That Eyra is really fast. I don't know if I can get insurance on a 300 R motor. State farm has been tough.
Every boat I have ever bought will top out at 59 mph...
Ken just curious does a eyra interest you at all? I know lots of pro’s run them!
You know it seems a fun boat to drive and the speed is really attractive, but I just really like a wider fishing platform up front. If the new Puma STS really does turn out to be 2-4 mph faster than the Lynx, and it has the wider front deck, I'll be tempted if it rides like the Lynx in big water
I know i am a year late on comment. But did the dealer say why no hot foot. Thanks.
They don't rig any of these boats prior to dealer meeting, not sure why?
With the governor built into that hull I'd bet the cougar is very close if not faster than the erya
governor?
What is the maintenance on this motor? Every so many hours the valves have to be adjusted?
As I am looking into a Verado 300
Chaz not sure on the Verado, my 4 stroke is oil change every 100 hours and I change out the water intake impeller every year
Thank you for the reply. Looking into a Lynx to purchase new and was looking into a 300 Verado on the back. On you video with Rick I believe he said that a 300 Verado on a Lynx would be a awesome set up.
On the 300R I was wondering if the valves on it require adjusting more than a regular 300 motor.
Thank you for all your input that you are doing for us.
Bass cat boats #1
WOO PIG!!!!
what would you recommend for a very first boat to buy? I'm 43
What’s your budget,
Where do you fish and do you tournament fish
@@KenSmithFishing not bass cat budget, I fish NWA SWEPCO lake near gentry Arkansas, I don’t fish tournament, I drive a truck and home 4 days a month
Beaver Lake ?
If i remember right we were on Norfolk.....or was it Bull Shoals????
I wonder what happens when you hit something solid at 85 mph.
I suspect they peel you off whatever you hit...and yes Pun intended Mr Peel
Promax cupped for stern Lift.
yep
Now now ken don't rub salt into wounds.
Sorry, but they haven't won over a 4 year school in about 10 years!
@@KenSmithFishing I know 😔 😥
Thats plenty Fast
ast
agreed
How about them Hogs
That boat needs a hotfoot and blinker trim
100% agree
Seams like your having a hard time handling this boat.
Just learning to drive it
It better run 80mph with a 300hp..
hold on.....
Love the boat but 300hp can't fish tournaments but some love speed better and never fish a tournament
You just can’t fish some trails and types of tournaments
@@kolbybakerfishing6255 trust me I would love 300 400 hp. My last ranger 2019 and waiting on gambler to come out with new boat design fron SC. I heard 21.6 250 running 88.7 and it was tournament loaded we see but number 2 is basscat their is no more ranger boats over price nitro now
Any boat with a 150 or over should have a hotfoot. That thing chine walks pretty bad. Good video though. Just seems very foreign and unsafe to drive that fast with one hand on the wheel. Why no hotfoot?
I guess since it's the dealer meeting they don't fully rig them
@@KenSmithFishing just seems pretty unsafe. I mean ultimately its on the driver to be safe, but a hotfoot to me is as important as a kill switch. I compare that to having a throttle lever in your truck. Just seems like really unsafe/old thinking. I get it that boats used to run 35 mph for fishing but 70+ is a diff creature. Just my opinion , all boats that run 50+ should come standard with one.
Why?
why not???
from friend I am fibre glass technician please you are from
im glad they beat texas but texas is not a good team and was over rated like every year
Derek just let me revel in the thought that we beat a ranked team...although i know you are correct....
If only you had learned to drive an Allison............
Bob I had same issue there, over trimming it
Meh, I'd take the Ballistic .223 over this in a heartbeat and push 90-92 with poles and 2 more feet of boat.
Yeah the .223 or .204 with the 300 and sport will flat out haul ass for being 21+ feet long
Add another $20k for the ballistic and pray they are in business in 10 years as well....lol
@@BSmith-qt7ev considering they’re moving operations to a more bass boat friendly area, I think they’re making some long term plans. In the event that aren’t around in 10 years, who cares. If you have one you aren’t having any structural problems with those boats. Ever. Entire boat if fully vaccum infused and they’re built like tanks.
@@BSmith-qt7ev pray any brand you buy is in business in ten years. If the economy takes another crap you can bet some larger operations could go under.
@@jib0726 The economy tank is coming fast within the next 6 months!
Stupid fast! Suicide boat.
sit down, hold on
Not that fast! Had a old 20' sleekcraft tunnel v with a 220 plus Yamaha 82 mph
My opinion. Absolutely no need for a bass boat to go that fast.
100% agree, but we are way past need...this is pure want!

@GT-mn3bx1 year ago
I got a regular style STV with a 2.5 300 Drag at 127 on my Stalker Radar gun in 1997 maybe. Pretty heavy boat with interior for 5. 34 Mazco cleaver if I remember right. I got the DCB owner in 93 or so with what was then the 2.5 SS(Prior to the Drag moniker) at 134 in a 19 Daytona a new stepped bottom when he was still rigging Eliminators and just came out with the DCB Mach 22.
4 strokes are gay