DIY ARDUINO METAL DETECTOR Spirit Pi 4 Pro A with LCD Screen/ Part 2
Вставка
- Опубліковано 4 лют 2025
- DIY ARDUINO METAL DETECTOR Spirit Pi 4 Pro A with LCD Screen/ Part 2
In this tutorial i will show you step by step how tu build homemade arduino metal detector. This is the part 2 we will finish to assemble this arduino metal detector and we will test it. Subscribe to my channel!
Order PCB on : jlcpcb.com/
The main folder you can find on my web page: neco-desarroll...
Support me on PayPal:
www.paypal.com...
My web page:neco-desarroll...
#SpiritPi #PiMetalDetector
GREAT PERFORMANCE THANK YOU
Thank!!
bad
❤ 20 foot deep and service next time very good my brother
Thanks for your great effort.
Brother awesome , from India
Nice bro. From 🇵🇭😁
Nice work. Curious to know what is the maximum range of the detection. Secondly, I could not see the Values its displaying in the LCD so not sure . Is it possible to show me the values being displayed in the LCD.
I am going to build this! it works as good as some professional (mid ones) ones out there but i will habe to get pcb from pcbway because shipping is too much for me from jlcpcb in india ! Thanks for the great intructions. Will let you know when i will start and if i face any problem:)
nice Sensivity
nice work
Thank you!
nice nice enjoy thanx
Up bro.💚💚💚
Hello bro how about for the big coil lets say 1meter by 1meter square can it fit for that kind of detector youll demo?
using Zero-Voltage
Transition can incress the depth
Underground electrical wire find project?
Thanks mr
Bro How to increase metal detecting range
PLEASE Make a short video on testing this PI MD sensitivity May god Bless You
Ok i will do!
Good job, outstanding performance, great performance, simple explanation, depth range please. Do you sell this machine to me?Thank you
Hi, I build the curcuit, an no matter how I tune the resistors balancing is done immediately. I double checked all parts, the only I think is I had to replace Q1 with a J113 FET. Any ideas? I have all the tools here to debug the circuit, I jus don't really understand that the purpose of CP2/SU1/SU2 is. Can you please help to get it up and running?
هل عندك هكس اردوينو
Could you make it discriminate between ferrous and non ferrous metals?
Hola Sergey, como estas? no entiendo el ingles, me podrias explicar porque cambiaste la r16 por el preset? obligadamente las resitencias tiene que ser de metal? o tambien pueden ser de carbon?
Can you tell me what is bust converter? other name of it? i am unable to find it
what does the led screen show, and i could not hear the sound as metal was close to coil, how far can you detect a womens gold ring from.
Hello Great video! I made the pcb from black and white archive not the gerber. Black and white design have differences from gerber. in your gerber you have an extra resistor(r21) connected from A0(arduino) to Q1-1, in black and white design this resistor dont exist. I must install it?
If do not understand some thing let me know)!!
what about the schema from the other side because i don't think that is the same with the schema in your web page
help me plz.
i have problem
when turning on stay at balancing
i adjust the resistor r16 and nothing change. plz help me
Great job man! Thank you so much !!
I will take revenge on you, you scammer
scammer@@B.Cote39
How much sensitive deep.
show legal
Thank you!
Hwo mach sir?
i did it but i can not tun it .. R 3 did not change the volt why ?
Please help, I cannot find the place of Resistance No. 21 in the chart !!
السلام عليكم اخي
هل صنعت الكاشف هذا من قبل
كيف الجهاز وكم المدئ من فضلك
@@suhailmohamed2126
وعليكم السلام، لم اكمل العمل عليه لم أنجح
ايش السبب
الذي واجهـته
هل القطع متوفره في السوق
@@suhailmohamed2126
أنصحك بالبولوني او الفليزجو فهم افضل بكثير
please i cant find the arduino sketch(program)
ok i find it in blog menu....thinks
Почему в русской версии ничего нет про этот резистор?
ihave schematic bro thx
Hola deseo comprar ti Spirit pi
can this do the discrimination