I made it just like her using sunflower oil. It didn't hold together. Separated and ph is super alkaline at 12ph. I think it needs to be blended. Will try again
@@rowdydoll You better test the PH of this soap. Someone else made it and it had a PH of 12 which can be dangerous to use on your skin. It should be no higher than 7. It's never tested in this video.
Yes, caustic soda is harmful for the skin but when it combine with the oil then it changes it's composition and then it is not at all harmful for the skin. Only thing you need to care is that you have to use proper proportion of caustic soda and oil. And without caustic soda any soaps can't be made, so it is a necessary component of the soap making process.
I want to tell you honestly that I have tried this method so many times. I want to suggest you that don't take 100 ml of water because it might be the reason for the soap to be liquified at room temperature.
Also, when you were heating oil and lye solution, they will make extra foams than the showed in the video. Please be careful because this is also a trial-and-error method for me too.
Amount of water. If it is remaining liquid then decrease the amount of water in the initial ingrediencies. Also, temperature maintenance matters through out whole making process. @@drrpparmar
So so nice and quick what a smart recipe
Thank you
చాలా బాగుంది.
Merci beaucoup. De Douala au Cameroun❤❤❤❤❤❤
thank you now i can make some soap from fight club
Great !!!! Thank you for sharing
Regards from Madrid 🇪🇸
Good information
Can I use olive oil
Sir if I want to make a huge quantity of soap base so what ratio should be used for all the chemicals.
This is melt and pour soap?
Nice and easy!Is there anyway to make the soap harder?Thanks for the video!
good one
Good.thank you
Can i use this soap base after 24 hour in my soap making process? Please tell mw
please help i did every thing like in the video but my soap isnt clear its white
Did you put it in fridge/freezer when in the mold?
Hi, can we use it immediately after setting or 45 days curing period
🤝👍 🎉🎉🎉
Sir direct transparent soap making method please batayen by simple method and simple ingriendients
Can you make large quantities of soap using this formula?
If ur using coconut oil their is a specific soapnification value i.e 100gm of coconut oil *0.183=18.3gms of lye should b used
@@mubinaayesha2324for making lye or for oil
Can we use glycerol instead of glycerin ?
How many months store soap base
I made it just like her using sunflower oil. It didn't hold together. Separated and ph is super alkaline at 12ph. I think it needs to be blended. Will try again
Thank you for letting us know. I won't be making this soap.
I think the issue is sunflower oil
Try using coconut oil
Sunflower oil doesn't harden. Try using coconut oil
Sir easy cold process
For transparent soap
Please share with small ingriedients
Could you please tell about how did you measure all the stuffs
How many days after making this soap can be used for bathing
At lest 30 day's later
I will need to convert that into a percentage formula based off the amount you provided. Thx!
Are you asking about the percentage yield?
Its formula is practical yield/theoretical yield * 100
@@thechemystery2884 yes
Bulk m kaise bnaye isey
Can we make it as bulk quantity soap base for makeing soaps, instead of buying glycerine soap base
Yes, you can but you should have experience to make it at less quantity.
@@thechemystery2884 ok thankyou,
@@rowdydoll You better test the PH of this soap. Someone else made it and it had a PH of 12 which can be dangerous to use on your skin. It should be no higher than 7. It's never tested in this video.
@@donnah.7346 god's grace i didn't do this
Sir can we use it direct as a soap
How many days curing period? Shall we use this soap base to make aloe vera soap.kindly reply
Maybe around a month.
Yes, you can use it as a base soap to make aloe vera soap. I will try to upload the video.
I think he put too much castic soda for that little amount of soap base
What is lye
I didn't understand how much glycerine to use? 5ml or 15 ml?
5 ml
🥰
@@HAMZAKhan-tj9no Thank you
cost kitna aayega 1kg manufacturing karne me
After hardening the soap base how long I have to left it to cure for a proper use. Thank you so much!
Around 30-40 days!
How many days curing 35day?
yes, 30 to 35 days.
Distilled water 100g n caustic soda50g add hoga
Yes
@@thechemystery2884hlo
Some thing cuting this video....the main ingradiant that is make solid this soap
base
1 table spoon or tea spoon??
One tea spoon. That's my mistake. Please make a correction.
Can you please provide the measurements of ingrediants for 1kg soap base..
I would suggest try it with small scale and then go for the 1 kg.
What happened with the glycerin bar?
I am sorry, I didn't get your question.
during heating process, creation of exsessive foam started. every thing turn into foam. What shall I do?
did this procedure work or not ??
Preservative kha he
Is this safe?
സോപ്പ് ഉണ്ടാക്കുന്നത് എങ്ങനെയെന്ന് ഈ ചാനൽ കാണുക
I want soap base
Order it from some online shopping site like amazon or flipkart.
Fridge e rakhte hy 1 din?
No
Ye without caustic soda k nahi ban sakta .caustic to khatarnak hota hai skin k liye. Pears wale without caustic k soap kaise banate hai
Yes, caustic soda is harmful for the skin but when it combine with the oil then it changes it's composition and then it is not at all harmful for the skin. Only thing you need to care is that you have to use proper proportion of caustic soda and oil. And without caustic soda any soaps can't be made, so it is a necessary component of the soap making process.
Pears is a syndet bar (synthetic). They add other chemicals to make it. You can't make natural soap without Caustic Soda.
No, without caustic soda soap base can't be made. Oil and caustic soda are necessary ingredients for soap making process@@gitali
Your method is wrong.
Lye solution is very weak, supposed to be 30% caustic soda and 70% water
Most important thing is don't cook it in direct fire.
Mera to transprent nahi bana white hogaya or theek se thick bhi nahi hua. Kafi naram tha k room temperature pr melt horaha hai.
I want to tell you honestly that I have tried this method so many times. I want to suggest you that don't take 100 ml of water because it might be the reason for the soap to be liquified at room temperature.
Also, when you were heating oil and lye solution, they will make extra foams than the showed in the video. Please be careful because this is also a trial-and-error method for me too.
Brother this method works or not?
Not work out
how i use it plz tell me 😢
You can use it for making different flavor of soaps!
The 5ml/ 1 tablespoon is throwing me off. 5ml is 1tsp. 15ml is one tablespoon. Looks like you're using a tablespoon so I guess its 15ml
This doesn't work.
Why?
@@gauravchouhan7668 I don't know what went wrong
That’s super helpful, thank you. I tried a different recipe yesterday for clear soap and wasted ingredients.
Its not possible
5 ml = 1 tea spoon
15 ml = 1 table spoon
Yes, correct. Please make a correction.
Please guide kren
5 ml is not table spoon rather tea spoon
Okay😂
this method wont work
Yes, I agree this is also a trial and error method for me as well. Lot of other factors affect this process. I want to be honest.
Why?
नमस्कार जी! आपके वीडियो बहुत अच्छे लगते हैं। यह ऐप मेकिंग तकनीक क्यों नहीं कम करेगी? क्या क्या factors काम करते है? धन्यवाद।परमात्मा आपका कल्याण करे।
Amount of water. If it is remaining liquid then decrease the amount of water in the initial ingrediencies. Also, temperature maintenance matters through out whole making process. @@drrpparmar
Please guide kren